Current position: Home > Products > Index F > FM27C010Q-120
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9 All

FM27C010Q-120

Vendor: FAI
Package Cooled: CDIP-32

Description

Measurements are done with the 13 MHz oscillator in slave mode. Measurements are done with a 32.768 kHz crystal connected to generate the Bluetooth low power clock. Measurements are done with a 13 MHz crystal connected and the Bluetooth low power clock derived from the 13 MHz.

Applications

Each DS1270 device is shipped from Dallas Semiconductor with its lithium energy source disconnected, guaranteeing full energy capacity. When VCC is first applied at a level greater than VTP, the lithium energy source is enabled for battery backup operation.

Features

FM27C010Q-120/45, RESET/RESET is an active low/HIGH, open drain output which goes active whenever VCC falls below the minimum VCC sense level. It will remain active until VCC rises above the minimum VCC sense level for 200ms. RESET/RESET also goes active if the Watchdog timer is enabled and CS remains either high or low longer than the Watchdog time out period. A fall- ing edge of CS will reset the watchdog timer.

Supplier

  • Part Name
  • Q'ty
  • Description
  • Vendor
  • Date Code
  • Date
  • Quotation
  • FM27C010Q-120
  • 10
  • http://www.silicon-ic.com
  • FSC
  • DIP32(陶瓷)
  • 2017-10-17
  • FM27C010Q-120
  • 2,062
  • original parts in stock
  • FAI
  • CDIP-32
  • 2017-10-17
  • FM20
  • 10000
  • new and Original products , competitive price with fast delivery time。
  • FSC
  • 2017-10-17
  • FM20
  • 2000
  • FSC
  • 3P
  • 2017-10-17

Send your message to supplier

Related Parts No.

· FM20

Vendor:FSC   D/C:08+   

Description: These three terminal positive regulators are supplied in hermetically sealed packages. All protective features are designed into the circuit, including thermal shutdown, current-limiting, and sa...

Applications: There are three kinds of registers on this device, the General Purpose Input Registers, the Block Lock Control Registers and Product Identification Registers. Users can access these registers thr...

Features: (FM206/FM208/FM209 EV kit, VCC = +2.75V, registers set to default power-up states except M1 = M2 = 306, R1 = R2 = 16, fIN = 183.7MHz, fREF = 19.2MHz, 0.6Vp-p synthesizer locked with passive 3rd-o...

· FM2000001

Vendor:SIMPLER   Package Cooled:BGA   D/C:00+   

· FM2000-001-BGA15208

Vendor:SIMPLER   Package Cooled:00+   D/C:585    

Description: As a alternative to a full chip erase, the device is organized into four planes that can be individu- ally erased. The plane erase command is a six-bus cycle operation. The plane whose address i...

Applications: INDUCTOR SELECTION Selecting the appropriate inductor type and value ensures optimal performance of the converter circuit for the intended application. This selection process requires the de...

Features: The minimum saturation voltage of the FM2000-001-BGA15208A respect to ground is 2.2V. On long line, when the voltage over FM2000-001-BGA15208A is low, the softclipping function automatically ...

· FM200-000-BGA15208

Vendor:N/A(stock)   Package Cooled:BGA   D/C:00   

Description: The SY88713V generates a PECL SD output. A programmable signal-detect level set pin (SDLVL) sets the sensitivity of the input amplitude detection. SD asserts high if the input amplitude rise...

Applications: Four 8-bit registers are provided for control, option select and status monitoring. These registers are addressed with the AD0, AD1, and AD2 multiplexed address lines (latched by ALE) and appear ...

Features: • Scanner/Printer Stepper Motor Control − Four outputs to external current drivers for the scanner stepper motor − Four outputs to external current drivers for the printer ...

· FM200-001

Vendor:SIMPLER   Package Cooled:06+   D/C:500   

· FM200-001-BGA15208

Vendor:SIMPLER   Package Cooled:BGA   D/C:00+ original   

Description: GHz TECHNOLOGY, INC. RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE. GHz RECOMMENDS THAT BEFORE THE PRODUCT(S) DESCRIBED HEREIN ARE WRITTEN INTO SPECIFICATIONS, OR USED IN CRITICAL APP...

Applications: The FM200-001-BGA15208/T Flash memory with SmartVoltage technology is a high-density, cost-effective, nonvolatile, read/write storage solution for a wide range of applications. It operates off of...

Features: The FM200-001-BGA15208/FM200-001-BGA15208 combine four 12-bit, voltage-output digital-to-analog converters (DACs) and four precision output amplifiers in a space-saving 16-pin package. Offset, ga...

· FM200-001--BGA15208

Package Cooled:BGA   D/C:02   

Description: This specification contains information about the Samsung Electronics Company OneNAND™‚ Flash memory product family. Section 1.0 includes a general overview, revision history, and prod...

Applications: The response is thus a logarithmic curve; each doubling of Cs increases the signal level and differential sensitivity by a factor of two. Likewise, doubling Cx reduces the signal level and dif...

Features: Fifth Generation HEXFETs from International Rectifier utilize advanced processing techniques to achieve extremely low on-resistance per silicon area. This benefit, combined with the fast swit...

· FM200TU-07A

Vendor:PRX   Package Cooled:200A/75V/MOSFET   

Description: Analog signals at the input (Vx) are firstly bandlimited to 508 kHz by an RC lowpass filter section. This performs the necessary anti-aliasing for the following first-order sampled data lowpass p...

Applications: (Output Pixel Rates Up to 112 MHz) Digital Visual Interface (DVI) Specification Compliant1 True-Color, 24 Bit/Pixel, 16.7M Colors at 1 or 2-Pixels Per Clock Laser Trimmed Internal Termination ...

Features: Device Select: As a target, the FM200TU-07A asserts this signal low when it recognizes its address after FRAMEN is asserted. As a bus master, the FM200TU-07A samples this signal to insure that ...

· FM200TU-3A

Vendor:PRX   Package Cooled:200A/150V/MOSFET   

Description: Adjustable Output Down to 1.2V Output Current of 3.0A Low Dropout Voltage 1.0V Typ. 0.015% Line Regulation 0.01% Load Regulation Current & Thermal Limiting Standard 3-Terminal Low Cost TO-...

Applications: 1. Tolerance 10% for L > 10 µH, 20% for L 10µH 2. Inductance at 0.5V, 100kHz 3. Irated (permanent DC) without heatsink ; With heatsink I = Irated x 1.4 4. Typical inductance v...

Features: Absolute Maximum Ratings are limits beyond which damage to the device may occur. Operating Conditions are conditions under which the device functions but the specification might not be guarantee...

· FM201

Description: The MAX3873A is implemented in Maxim's second-generation SiGe process and consumes only 260mW at 3.3V supply (output clock disabled, low output swing). The device is available in a 4mm x 4mm 20-p...

Applications: The MB90590/590G series with two FULL-CAN*1 interfaces and FLASH ROM is especially designed for auto- motive and industrial applications. Its main features are two on board CAN Interfaces, which...

Features: The FM201 is a member of the HPCTM family of High Performance microControllers Each member of the family has a similar core CPU with unique memory resources and I O configuration to suit specif...

Hot Part Number

Home About Us Map Online Inquiry
© 2009-2011 ExchangeIC.com Corp.All Rights Reserved