Current position: Home > Products > Index 3 > Page 1
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9 All

Records matching criteria: 28433

Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 264 201 261 210 58 248 247 177 102 251 89 157 236 134 229 153 175 32 251 237 204 128 248 98 130 109 173 190 271 104 112 163 217 189 66

· 3RK1902-0CR00

Vendor:SIEMENS   Package Cooled:MOTOR SUPPLY CABLE JZHF   D/C:07+   

· 3RK1903-2AC00

Vendor:SIEMENS   Package Cooled:65MM TERMINAL BLOCK PEN   D/C:07+   

· 34P3410

Vendor:SMD   Package Cooled:TI   D/C:N/A   

· 3050-24R-0.5MST-2

Description: Four channels of EMI filtering with ESD protection Greater than 30dB of attenuation from 800MHz to 3GHz 15kV ESD protection (IEC 61000-4-2, contact discharge) 30kV ESD protection (HBM) 8-lead TDFN package (2mm x 2mm), 0.5mm pitch Lead-free version available

Applications: The VCA2619 also features low crosstalk and outstanding distortion performance. The combination of low noise and gain range programmability make the VCA2619 a versatile building block in a number of applications where noise performance is critical. The VCA2619 is available in a TQFPͨ...

Features: Pin Descriptions Active-Low, Push-pull Reset Output (RST) - 3050-24R-0.5MST-2/6823/6824/6825. Pulses low when trig- gered, and stays low whenever VCC is below the reset threshold or when MR is a logic low. It re- mains low for trec after either VCC rises above the reset threshold, the wa...

· 35747-0410

Description: The receivers single-conversion architecture requires careful frequency planning. Besides the desired RF input signal, there are a number of spurious signals that may cause an undesired response at the output. Among them is the image of the RF signal that must be suppressed by the RF front-en...

Applications: The 35747-0410ynix 35747-0410 Series are Dual In-line Memory Modules suitable for easy interchange and addition of 128Mbytes memory. The 35747-0410ynix 35747-0410 Series are fully synchronous operation referenced to the positive edge of the clock . All inputs and outputs are synchronized with...

Features: In addition to performing basic instruction execution, the CPU32+ also provides central power management capabilities to the 35747-0410 as well as a sophisticated background debug port for non-invasive instrumentation in the software development and debug environments.

· 357470410

Description: HT1626 is a peripheral device specially designed for I/O type MCU used to expand the display capability. The max. display segment of the device are 768 patterns (48´16). It also supports serial interface, buzzer sound, Watchdog Timer or time base timer functions. The HT1626 is a memory ...

Applications: When a recommended transformer is used and option pins are properly set, the transmitted pulse shape at the end of a 75Ω terminated cable of 0 to 450 feet will fit the template for DSX3 pulse published in ANSI T1.102-1993, Bellcore TR-NWT-000499 documents.

Features: The 357470410 meets the increasing demands for higher output power in 3GPP 1XRTT handsets. The PA module is optimized for VREF = +2.85 V, a requirement for compatibility with the Qualcomm® 6250 chipset. The device is manufactured on an advanced InGaP HBT MMIC technology offering sta...

· 39-29-9204

Description: Using commercially available, low-cost peripheral devices, the ACE Flash card can be programmed independently in a PC environment, in which the Flash card appears as an additional hard drive. Besides these standard options, the System ACE solution allows for in-system programming of an A...

Applications: structed as a multi-chip hybrid device. Actuation control is via an Infrared LED. The output switch is a combination of a photodiode array with MOSFET switches and control circuity. The relays can be con- figured for AC/DC or DC only operation.

Features: Macrocells can individually be specified for high per- formance or low power operation by adding attributes to the logic schematic, or declaration statements to the behavioral description. To minimize power dissipation, unused Function Blocks are turned off and unused Macrocells i...

· 39535-4010

· 38510/65602BRA

· 34RD561K

· 35-03UYC/S598

Vendor:EVERLIGHT   Package Cooled:SMD-LED   D/C:07+   

· 3232EHCA

Vendor:SIPEX   Package Cooled:SSOP16   D/C:05+   

Description: † All typical values are at 25C and with a 3.3 V supply. ‡ tsk(o) is the magnitude of the time difference between the tPLH or tPHL of all drivers of a single device with all of their inputs connected together. tsk(pp) is the magnitude of the difference in propagation delay times...

Applications: XTAL1 and XTAL2 are input and output, respectively, of an inverting amplifier that can be configured for use as an on-chip oscillator, as shown in Figure 2. Either a quartz crystal or a ceramic resonator may be used. To drive the device from an external clock source, XTAL2 should be left un...

Features: The Hitachi 3232EHCA is a CMOS static RAM organized 64-kword 8-bit. It realizes higher density, higher performance and low power consumption by employing 0.8 µm Hi-CMOS process technology. It offers low power standby power dissipation; therefore, it is suitable for battery backup sys...

· 344146900010R00

· 32.7680KHZ

Description: • Viewing Angles Match Traffic Management Requirements • Colors Meet Automotive and Traffic Signal Specifications • Superior Light Output Performance in Outdoor Environments • Suitable for Autoinsertion into PC Boards

Applications: NanoStar and NanoFree Packages Supports 5-V VCC Operation Inputs Accept Voltages to 5.5 V Max tpd of 4.1 ns at 3.3 V Low Power Consumption, 10-µA Max ICC 24-mA Output Drive at 3.3 V Typical VOLP (Output Ground Bounce) <0.8 V at VCC = 3.3 V, TA = 25C Typical VOHV (...

Features: Hynix HYMD212G726(L)S4-K/H/L series is designed for high speed of up to 133MHz and offers fully synchronous operations referenced to both rising and falling edges of differential clock inputs. While all addresses and control inputs are latched on the rising edges of the clock, Data, Data strob...

· 39-00-0068

· 30L6P43

Description: Error amplifier inverting Soft start and SCP setting capacitor connection pin Power supply pin Output current setting and control pin Totem-pole type output pin Ground pin Capacitor and resistor connection pin setting the oscillation frequency Error amplifier output pin

Applications: A flow through pin out has been adopted to allow simple PCB routing and maintain the cost effectiveness of this solution. All inputs and outputs of the BUFxx703 incorporate internal ESD protection circuits that prevent functional failures at voltages up to 4kV HBM and 1.5kV CDM.

Features: 1) CPD is defined as the value of the ICs internal equivalent capacitance which is calculated from the operating current consumption without load. (Refer to Test Circuit). Average operating current can be obtained by the following equation. ICC(opr) = CPD x VCC x fIN + ICC/8 (per circuit)

· 39940-0411

· 3TK2845-2BB41

Vendor:SIEMENS   Package Cooled:SIRIUS SAFETY RELAY   D/C:07+   

· 3062STF

Vendor:QFP-64   Package Cooled:HIT   D/C:2004+   

Description: Manage IT Suite Migration Increase efficiency of software and operating system deployment, manage software patches and migrate user settings with Altiris software solutions Manage IT Suite Controlling Enhance your multivendor hard- and software inventory, manage the use of applicati...

Applications: The drain pins are designed to connect directly to the primary lead of the transformer and are capable of switching a maximum of 650V. Minimizing the length of the trace connecting these pins to the transformer will decrease leakage inductance.

Features: Notes: 1. Standard deviation number is based on measurement of at least 500 parts from three non-consecutive wafer lots during the initial characterization of this product and is intended to be used as an estimate for distribution of the typical specification. 2. IIP3 test condition: FRF1 = ...

· 32F8102-CN

Vendor:SMD   Package Cooled:TI   D/C:05+   

Description: Figure 2 shows the Human Body Model, and Figure 3 shows the current waveform it generates when dis- charged into a low impedance. This model consists of a 100pF capacitor charged to the ESD voltage of interest, and then discharged into the test device through a 1.5kΩ resistor.

Applications: The data contained in the data stream can also affect lock time. If a specific pattern is repetitive, the deserializer could enter false lockfalsely recognizing the data pattern as the start/stop bits. This is referred to as repetitive multitransition (RMT); see Figure 1 for RMT examples. T...

Features: DESCRIPTION The 32F8102-CNY TIMEKEEPER ® RAM is an 8K x 8 non-volatile static RAM and real time clock. The monolithic chip is available in the SNAPHAT pack- age to provide a highly integrated battery backed- up memory and real time clock solution. The 28 pin 330mil SOIC provides so...

· 313BGA

Description: Notes: 1. For Max. or Min. conditions, use appropriate value specified under Electrical Characteristics for the applicable device type. 2. Typical values are at VCC = 3.3V, TA = 25C ambient and maximum loading. 3. Measured by the voltage drop between A and B pin at indicated current throug...

Applications: Note: (1) (Write All Locations) is a test mode operation and is therefore not included in the A.C./D.C. Operations specifications. (2) Input Rise and Fall Times (10% to 90%) < 10 ns. (3) Input Pulse Levels = VCC x 0.2 and VCC x 0.8. (4) Input and Output Timing Reference = VCC x 0.3 and...

Features: The 313BGA has been developed specifically for the +5V single supply or 1V to 6V dual supply user. Several important characteristics of the device make application easier to implement at those voltages. First, each operational amplifier can operate with rail to rail input and output volta...

· 30-X

Description: For cellular phone and PDA applications, voltage-mode control provides a number of advantages, including the avoidance of power dissipation in current sensing elements, greater noise immunity (since the PWM signal can be as high as 1 V), and a less complicated single feedback loop to com...

Applications: Similar To Industry Standard LT1085 Approved To DESC Standardized Military Drawing Number 5962-88646 Adjustable Output Voltage Built In Thermal Overload Protection Short Circuit Current Limiting Maximum Output Voltage Tolerance is Guaranteed To 1% Guaranteed Dropout Voltage At Multipl...

Features: The 30-X is a timing controller that combines an LVDS single pixel input interface with Nationals Reduced Swing Differential Signaling (RSDS™) output driver interface for (SVGA) XGA and Wide XGA resolutions. It resides on the TFT-LCD panel and provides the data buffering and control...

· 315-6059A

Vendor:BGA   Package Cooled:26   D/C:98+   

Description: Input voltage range of 4.5VC24V Constant On-Time No compensation needed Maximum Load Current of 3A Switching frequency of 100 kHzC500 kHz Constant frequency across input range TTL compatible shutdown thresholds Low standby current of 12 µA 130 mΩ internal MOSFET switch

Applications: The 315-6059A is a 3-channel ASK receiver for 125-kHz carrier signals. Its three active input stages with very low power consumption and high input sensitivity allow to connect up to 3 antennas for direction-independent wake-up function and data transfer.

Features: GENERAL FEATURES Simultaneous SD and HD Inputs and Outputs Oversampling (108 MHz/148.5 MHz) On-Board Voltage Reference 6 Precision Video 11-Bit DACs 2-Wire Serial MPU Interface Dual I/O Supply 2.5 V/3.3 V Operation Analog and Digital Supply 2.5 V On-Board PLL 64-LQFP Package Lead-Free ...

· 3223ECY

Description: The Buck regulator is a synchronous rectifier PWM regulator with integrated MOSFETs. This regulator has an LDO function for low power modes to conserve power and lower ripple voltage associated with PFM mode. The NCP1501 does not contain an internal oscillator for the switching mode. Th...

Applications: NEC's 3223ECY is a low cost GaAs MESFET suitable for both amplifier and oscillator applications through X-band. The device features a 0.8 micron recessed gate, triple epitaxial technology and is fabricated using ion implantation for improved RF and DC performance and uniformity. This dev...

Features: The 3223ECY is a complete microphone signal conditioning system in a single integrated circuit. Designed primarily for voiceband applications, this integrated circuit provides amplifi- cation, rms detection, limiting, variable compression, and down- ward expansion. The internal rms detecto...

· 3103

Description: The Simtek STK11C88 is a fast static RAM with a nonvolatile, electrically erasable PROM element incorporated in each static memory cell. The SRAM can be read and written an unlimited number of times, while independent nonvolatile data resides in EEPROM. Data transfers from the SRAM to t...

Applications: To guarantee the Table 1 delay accuracy for input frequencies higher than the Maximum Operating Frequency, the 3D7205 must be tested at the user operating frequency. Therefore, to facilitate production and device identification, the part number will include a custom reference designator iden...

Features: When external capacitors are used with any I.C. regulator it is sometimes necessary to add protection diodes to prevent the capacitors from discharging through low current points into the regulator. Figure 18 shows the 3103 with the recommended protection diodes for output voltages in excess ...

· 324ARP

Vendor:SMD-14   Package Cooled:HIT   D/C:04+   

Description: A: The value of R JA is measured with the device mounted on 1in FR-4 board with 2oz. Copper, in a still air environment with TA =25C. The Power dissipation PDSM is based on steady-state R JA and the maximum allowed junction temperature of 150C. The value in any a given application depends on ...

Applications: Manual reset input. Shorting this pin to GND forces a reset. The reset will remain asserted as long as MR is held low and for one reset time-out period (140ms min.) after MR goes high. This input cannot be driven by a CMOS or TTL logic. Push-button switch is recommended to be used with thi...

Features: A: The value of R JA is measured with the device mounted on 1in2 FR-4 board with 2oz. Copper, in a still air environment with TA =25C. The value in any a given application depends on the user's specific board design. The current rating is based on the t 10s thermal resistance rating. B: Rep...

· 3SK300

Vendor:HITACHI?   Package Cooled:07+   D/C:06+   

Description: Loading With the rising edge of the Clock, a low level on Load (pin 9) loads the data from the Preset Data input pins (P0, P1, P2, P3) into the internal flipCflops and onto the output pins, Q0 through Q3. The count function is disabled as long as Load is low.

Applications: The inductor and varactor elements of the tank circuits are integrated on-chip, greatly simplifying application of the part. In addition, the center frequency of oscillation and frequency span are factory preset to provide a guaranteed frequency range versus control voltage. An external tunin...

Features: s 60 MHz maximum CPU clock available from programmable on-chip Phase-Locked Loop with settling time of 100 µs. s On-chip crystal oscillator with an operating range of 1 MHz to 30 MHz. s Two low power modes, Idle and Power-down. s Processor wake-up from Power-down mode via external ...

· 31FBN

· 3SE3100-1RZA0-1

Vendor:SIEMENS   Package Cooled:POSITION SWITCH, METAL-ENCLOSED   D/C:07+   

· 3SMC7.0A

Vendor:Centralsemi   Package Cooled:SMC/DO-214AB   D/C:2009+   

· 302E

Description: The segment and backplane drivers each consist of a CMOS inverter, with the N-Channel and P-Channel devices ratioed to provide identical on resistances, and thus equal rise and fall times. This eliminates any DC component, which could arise from differing rise and fall times, and ensures maxi...

Applications: Power Control (SO-14 only) Maximum Logic 0 Minimum Logic 1 Logic Input Current Supply Current at Full Power Supply Current at Power Cutback Supply Current at Idle Power Supply Current at Shutdown Output Impedance in Idle Power Output Impedance in Shutdown Shutdown Isolation Ma...

Features: True Dual-Ported memory cells which allow simultaneous access of the same memory location High-speed access C Commercial: 15/20ns (max.) C Industrial: 20ns (max.) Low-power operation C 302E Active: 440mW (typ.) Standby: 660µW (typ.) Dual chip enables allow for depth expansion w...

· 333-2SURC/H3/S530-A4

Vendor:EVER LIGHT   Package Cooled:.   D/C:07+   

· 303690547

· 3YVJ-230J

· 346233481

Vendor:H   Package Cooled:PLCC-28   D/C:PLCC-28   

· 3-1906054-9

· 327AK

Description: † Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating conditions is not implied. E...

Applications: PORT D is an 8-bit output port that is preset high when RESET goes low Care must be exercised with the D2 pin operation At reset the external load on this pin must en- sure that the output voltage stay above 0 7 VCC to prevent the chip from entering special modes Also keep the exter- nal...

Features: The 327AK microcontroller family provides PICmicro® devices in 18- to 80-pin packages, that are both socket and software upwardly compatible to the PIC16 family. The 327AK family includes all the popular peripherals, such as MSSP ESCI, CCP flexible 8- and 16-bit timers, PSP 10-bit,,, ADC,...

· 3246.00

Vendor:HARRIS   Package Cooled:SMD   D/C:98+   

· 3SE7310-1AE04

Vendor:SIEMENS   Package Cooled:BELT UNBALANCE PROT.DEV.   D/C:07+   

· 3SE2100-6D

Vendor:SIEMENS   Package Cooled:POSITION SWITCH,METAL-ENCLOSED   D/C:07+   

· 3SE5232-0HC03-8AA8

Vendor:SIEMENS   Package Cooled:SIRIUS POSITION SWITCH   D/C:07+   

· 31125A

Description: Internal level translators allow controllers operating with supplies as low as 1.2V to interface with 1.8V or 3V smart cards. Battery life is maximized by a low operating current of less than 100µA and a shutdown current of less than 1µA. Board area is minimized by the low profile ...

Applications: The DS1554 also contains its own power-fail circuitry which automatically deselects the device when the VCC supply enters an out of tolerance condition. This feature provides a high degree of data security during unpredictable system operation brought on by low VCC levels.

· 39521-0005

· 3588_02

· 35V0.33UF

· 38HC43E

Description: o dcOutput Duty Cycle48 NOTE 1: Defined as skew between outputs at the same supply voltage and with equal load conditions. Measured at the output differential cross points. NOTE 2: This parameter is defined in accordance with JEDEC Standard 65. NOTE 3: Please refer to the Phase Noise Plo...

Applications: Reprogrammable technology allows easy customization, quick turnaround on design changes and product performance enhancements, and better inventory control. Parts can be reprogrammed up to 100 times, reducing inventory of custom parts and providing an easy method for upgrading existing designs.

Features: The 38HC43E incorporates six basic functions of the Ethernet Transceiver, including receiving, transmitting, collision signaling, collision detection, jabber timing, and the heartbeat function. Refer to Figure 1 for a general system block diagram.

· 3T012315-04

Description: C Active Mode: 200 µA at 1 MHz, 2.2 V C Standby Mode: 0.7 µA C Off Mode (RAM Retention): 0.1 µA Five Power Saving Modes Wake-Up From Standby Mode in 6 µs 16-Bit RISC Architecture, 125 ns Instruction Cycle Time Basic Clock Module Configurations: C Various Internal Re...

Applications: Internal reference, REFIN bypassed to AGND with a combination of 0.22µF in parallel with 1nF capacitor. External 2.048V reference applied to REFIN. Internal reference disabled. VREFIN = 0, VREFP = 2.162V, VCML = 1.65V, and VREFN = 1.138V. IMD is measured with respect to either of the fu...

Features: The 3T012315-04 is designed to be a single chip termination subsystem for use in PnP SCSI systems, Figure 1. When embedded on a host bus adapter or mother- board, the 3T012315-04 can automatically sense the ter- mination status of the SCSI bus and attach or isolate its resistors as need...

· 3.421466E011

· 312A5892P1

Vendor:HARRIS   Package Cooled:92+   D/C:DIP16   

· 39543-0620

· 33FMN-BMTTN-TF

Vendor:JST   Package Cooled:N/A   D/C:2008+   

· 3189218

· 3017216606

· 39-30-7165

· 3503/BQAJC

Description: The high-side driver is designed to drive low rDS(on) N-channel MOSFETs. The current rating of the driver is 4 A minimum, source and sink. The high-side driver can be configured as a GND-reference driver or as a floating-bootstrap driver. The internal bootstrap diode is a Schottky, for impr...

Applications: The AMI signal first enters a selectable fixed 20 dB amplifier stage that compensates for very low amplitude DSX3 monitor signal when MON pin is held high. The signal then enters an equalizer and AGC gain stage. The equalizer is designed to overcome intersymbol interference caused by long ca...

Features: Xilinx developed the System Advanced Configuration Envi- ronment (System ACE) family to address the need for a space-efficient, pre-engineered, high-density configuration solution for systems with multiple FPGAs. System ACE technology is a ground-breaking in-system programmable configura...

· 39-29-9049

Description: n 5V output within 1.2% over temperature (A grade) n Adjustable 1.23 to 29V output voltage available (LP2954IM and LP2954AIM) n Guaranteed 250 mA output current n Extremely low quiescent current n Low dropout voltage n Reverse battery protection n Extremely tight line and load regul...

Applications: 300 mA/1.9V/2.5V DC to DC for Co-processor Core 80 mA/2.8V Dual-mode LDO for Memories (LDO1) 130 mA/2.7V/2.8V LDO for Camera Module (LDO2) 130 mA/2.8V LDO for Analog Section Supply of Audio Stereo Codec (LDO6) 10 mA/1.8V/2.8V LDO for Digital Section Supply of Audio Stereo Codec (LDO7) 130 mA/...

Features: The 39-29-9049 provides eight bits of high-speed TTL-compatible bus switching in a standard 245 device pinout. The low on-state resistance of the switch allows connections to be made with minimal propagation delay. The device is organized as one 8-bit switch. When output enable (OE) is ...

· 303-100-00283

Vendor:SAGAMI   Package Cooled:1.5k/reel   D/C:ORIGINAL   

· 3014315-02

Vendor:TI   Package Cooled:SOP20W   D/C:2007+   

Description: Note: The over-temperature protection is a last resort mecha- nism to prevent thermal stress to the regulator. Operation at or close to the thermal shutdown temperature is not recom- mended and will reduce the long-term reliability of the module. Always operate the regulator within the sp...

Applications: The video decoder directs the video in YUV 4:2:2 format, and the video synchronization signals, to the video input port of the 3014315-02R36060. The video is also transferred to the video encoder for display on a TV monitor and simultaneously to the Video Front End of the 3014315-02. The ...

Features: The only external RF components needed for the transmitter are the antenna and its matching components. Antennas presenting an im- pedance in the range of 35 to 72 ohms resistive can be satisfactorily matched to the RFIO pin with a series matching coil and a shunt matching/ESD protection coil....

· 3224W-1-502E

Description: >85% Efficiency 350uA quiescent current in shutdown Fast transient response Soft control power-up Over-Voltage Protection Output voltage range from 2.0V to 3.6V Factory trimmed low TC reference voltage Adjustable oscillator frequency Drives N-Channel MOSFETs 16 pin SOIC package

Features: 3224W-1-502E series is a series of 3 to 340 seconds single chip high quality voice synthesizer IC which contains one 4-bit Input port (provided for 3224W-1-502E100 and above), three 4-bit I/O ports and a tiny controller. By programming through the tiny controller, user's application includes...

· 344145700020R00

· 37AH8DKHC377

Vendor:INTEL MITEL   Package Cooled:20 SO   D/C:2005   

· 38F5769

· 3SF1324-1SJ21-1BA1

· 3SE2303-0WW

Vendor:SIEMENS   Package Cooled:POSITION SWITCH, METAL-ENCLOSED   D/C:07+   

· 3-487997-0

Vendor:AMP   Package Cooled:N/A   D/C:05+   

· 3KASMC13AHE3/9AT

Vendor:VISHAY   Package Cooled:DO-214AB   D/C:2009+   

· 342M05LF

Vendor:ICS   Package Cooled:SOP-3.9-8P   D/C:05+   

Description: LO IN=-4dBm See note 1 and 2. Mixer Preamp ON Mixer Preamp OFF Mixer Preamp ON Mixer Preamp OFF Mixer Preamp ON Mixer Preamp OFF Mixer Preamp ON/Mixer/LO Input Amps Mixer Preamp OFF/Mixer/LO Input Amps Mixer Preamp ON Mixer Preamp OFF High and Low Side LO Injection See not...

Applications: The DS1330 256k NV SRAMs are 262,144-bit, fully static, NV SRAMs organized as 32,768 words by 8 bits. Each NV SRAM has a self-contained lithium energy source and control circuitry which constantly monitors VCC for an out-of-tolerance condition. When such a condition occurs, the lithium energy...

Features: Information subject to change. The Microchip name and logo, the Microchip logo, KEELOQ, MPLAB, PIC, PICmicro, PICSTART and PRO MATE are registered trademarks of Microchip Technology Inc. in the U.S.A. and other countries. FilterLab, microID, MXDEV, MXLAB, PICMASTER, SEEVAL and The Embedded Co...

· 38HA01P1000

Vendor:SAE   Package Cooled:QFP   D/C:2006   

Description: Switching Frequency On/Off Standby (Pin 3) Input High Voltage Input Low Voltage Input Low Current Standby Input Current External Output Capacitance External Input Capacitance Operating Temperature Range Storage Temperature Reliability

Features: The charge pump is a doubler configuration that uses one external flying capacitor. When enabled, a 2-phase nonoverlapping clock controls the charge pump switches. At start-up, the LDO is disabled and the load is removed from CPO. When CPO reaches 1.75VIN the LDO is enabled. If CPO falls belo...

· 30559

Description: Each output has independent blink timing with two blink phases. All LEDs can be individually set to be on or off during either blink phase, or to ignore the blink control. The blink period is controlled by a clock input (up to 1kHz) on BLINK or by a register. The BLINK input can also be used ...

Applications: Case: JEDEC TO-220AB, ITO-220AB & TO-263AB molded plastic body Terminals: Plated leads, solderable per MIL-STD-750, Method 2026 Polarity: As marked Mounting Position: Any Mounting Torque: 10 in-lbs maximum Weight: 0.08 oz., 2.24 g

Features: The 30559/30/33 are high-performance 30559MOS static RAMs organized as 256K words by 16 bits. These devices feature advanced circuit design to provide ultra-low active cur- rent. This is ideal for providing More Battery Life™ (MoBL™) in portable applications such as cellular t...

· 3202ECY

Vendor:SIPEX   Package Cooled:SOP20   D/C:00+   

· 32KI37LF

· 3SE3100-6UWZA-20

Vendor:SIEMENS   Package Cooled:POSITION SWITCH, METAL-ENCLOSED   D/C:07+   

· 3-1906012-7

· 3296P-1-202

Description: starts and the wiper voltage VFB of the feedback potentiometer moves in the direction of the input voltage VCOM, bringing the VERR voltage back to zero. When VERR becomes lower than (Vcc-VSTP)/10, a proportional control activates. The motor volt- age at M+ and M- lowers with a rate fac...

Applications: SUMMARY DESCRIPTION The M29W400B is a 4 Mbit (512Kb x8 or 256Kb x16) non-volatile memory that can be read, erased and reprogrammed. These operations can be per- formed using a single low voltage (2.7 to 3.6V) supply. On power-up the memory defaults to its Read mode where it can be read...

Features: accessed with 40ns access times to any of its registers, including its packet memory. No DMA services are used by the 3296P-1-202; virtually decoupling network traffic from local or system bus utilization. For packet memory management, the 3296P-1-202 integrates a unique hardware Memory Mana...

· 33119-0004

Vendor:Molex   Package Cooled:connector   D/C:06+   

· 3522JQ

· 3627JM

Description: 1) CPD is defined as the value of the ICs internal equivalent capacitance which is calculated from the operating current consumption without load. (Refer to Test Circuit). Average operating current can be obtained by the following equation. ICC(opr) = CPD x VCC x fIN + I CC/2 (per FLIP/ FLOP)

Applications: 1. Optical switch 2. Light detecting portion of remote control ․AV instruments such as Audio, TV, VCR, CD, MD, etc. ․Home appliances such as Air-conditioner, Fan , etc. ․The other equipments with wireless remote control. ․CATV set top boxes ․Multi-media Equip...

Features: Addresses and data needed for the programming and erase operations are internally latched during write cycles, and the host system can detect completion of a program or erase operation by observing the RY/BY# pin, or by reading the DQ[7] (Data# Polling) and DQ[6] (toggle) status bits. ...

· 385BI

· 3DG402

· 3RK1322-0HS02-1AA4

Vendor:SIEMENS   Package Cooled:AS-I COMPACT STARTER, IP65,   D/C:07+   

· 39000281

Vendor:MOLEX   Package Cooled:TEMINAL .093 CRIMP PIN 1189AT   D/C:2006   

Description: The chopper stabilized amplifier uses switched capacitor techniques to eliminate the amplifier offset voltage, which, in bipolar devices, is a major source of temperature sensitive drift. CMOS makes this advanced technique possi- ble. The CMOS chip is also much smaller than a bipolar chip, a...

Applications: Naming Conventions. With a south pole in front of the branded surface of the sensor, a north pole behind the sensor, the field at the sensor is defined as positive. As used here, negative flux densities are defined as less than zero (algebraic convention), e.g., -100 G is less than -50 G.

Features: 1) These Specifications contain information related to the Companys industrial property. Any use of them other than pertaining to the usage of appropriate products is not permitted. Duplication of these Specifications and its disclosure to a third party without the Companys permission is pr...

· 39-00-0281

· 33-011-31-15-B

· 39535-0011

· 35YXA470M10X16

· 39-29-1088

Description: BW[A:D] signals. The 39-29-1088 provides byte write capability that is described in the Write Cycle Description table. Asserting the Byte Write Enable input (BWE) with the selected Byte Write (BW[A:D]) input will selectively write to only the desired bytes. Bytes not selected during a byte ...

Applications: 1.1 GHz Toggle Frequency Supply Voltage 4.5 to 5.5 V Low Power 4.0 mA Typical Operating Temperature Range of C40 to 85C The MC12026 is Pin Compatible with the MC12022 Short Setup Time (tset ) 6.0 ns Typical @ 1.1 GHz Modulus Control Input Level is Compatible with Standard CMOS and TTL

Features: Built-in low-voltage detection circuit. Prevents incorrect operations and writing errors in the EEPROM during drops in power voltage. An external LVD must be used to assert reset at power supply voltage below 4.5 V if Neuron Chip is operated at 20 MHz.

· 3SE2830-1XX20

Vendor:SIEMENS   Package Cooled:POSITION SWITCH,   D/C:07+   

· 3294-15UBGC-S400-A4

Vendor:.   Package Cooled:.   D/C:07+   

· 350FM

· 3SE2120-6GW00-0AG8

Vendor:SIEMENS   Package Cooled:POS. SWITCH WITH METAL ENCLOS.,   D/C:07+   

· 3294-15SURC/S530-A3

Vendor:EVER LIGHT   Package Cooled:.   D/C:07+   

· 3AE4L2V5066TZ

· 35994

· 3N104

Vendor:MOT   Package Cooled:CAN   D/C:01+   

Description: Features O 5V tolerant inputs and outputs O 2.3VC3.6V VCC specifications provided O 8.0 ns tPD max (VCC 3.3V), 10 PA ICC max O Power-down high impedance inputs and outputs O Supports live insertion/withdrawal (Note ) O r24 mA output drive (VCC 3.0V) O Implements patented noise/EMI reduct...

Features: Current Limit Induced Thermal Shutdown Internal circuitry increases the output MOSFET on-resistance until the series combination of the MOSFET on-resistance and the load impedance limit current to typically 850mA. The increase in power dissipation, in most cases, will cause the 3N104 to go i...

· 39500-0012

· 32SM12176-02

Vendor:AMI   Package Cooled:9751+   D/C:93+   

Description: The IC must be equipped with external RC circuitry to limit the voltage in the event of power surges (see Figure 3 on page 3). This prevents the circuit from being damaged or destroyed, and provides a buffer in case of power fluctuations at VBatt. The RxD compar- ator is powered via pin VS...

Applications: † All characteristics are measured under open-loop conditions, with zero common-mode input voltage, unless otherwise specified. ‡ Full temperature ranges are: − 40C to 85C for the SA5532 and SA5532A, and 0C to 70C for the NE5532 and NE5532A.

Features: The channel is set by an on-chip high-speed I2C compatible bus receiver. A Phase-Locked Loop (PLL) tunes the modulator over the full UHF range. The modulator incorporates a sound subcarrier oscillator and uses a second PLL to derive 4.5, 5.5, 6.0, and 6.5MHz subcarrier frequencies. These fre...

· 39VF04033-4C-NH

Vendor:353   Package Cooled:PLCC   D/C:03+   

· 3508A

Vendor:CAN8   Package Cooled:1280   D/C:07+   

Description: Freescale Semiconductor has developed a low cost, high volume, miniature pressure sensor package which is ideal as a sub--module component or a disposable unit. The unique concept of the Chip Pak allows great flexibility in system design while allowing an economic solution for the designer....

Applications: The D2Pak is a surface mount power package capable of accommodating die sizes up to HEX-4. It provides the highest power capability and the lowest possible on- resistance in any existing surface mount package. The D2Pak is suitable for high current applications because of its low intern...

Features: NEC's 3508A is an optically coupled isolator containing a GaAs light emitting diode and an NPN silicon phototransistor is one package for high density mounting applications. This device is housed in an ultra small flat-lead package which realizes a reduction in mounting area of about 30% ...

· 39524-0003

· 39533-2006

Pages: 1/285   1 2 3 4 5 6 7 8 9 10 Under 10

Quick Search Part No.

Home About Us Map Online Inquiry
© 2009-2011 ExchangeIC.com Corp.All Rights Reserved