Current position: Home > Products > Index B > Page 76
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9 All

· BC547_D27Z

· B37933K5010B260

Vendor:epcos   Package Cooled:epcos   D/C:dc0622   

Description: The HD404318 Series is 4-bit HMCS400-series microcomputer with large-capacity memory designed to increase program productivity. Each microcomputer has an A/D converter and input capture timer built in. They also come with high-voltage I/O pins that can directly drive a fluorescent display.

Applications: ➀ Typical at TA = +25C under nominal line voltage and balanced "full-load" (5V @7.5A, 3.3V @ 7.5A) conditions unless otherwise noted. ➁ Ripple/Noise (R/N) measured over a 20MHz bandwidth. All models are specified with 22µF, low-ESR, input capacitor and 10&m...

Features: All outputs are capable of driving 2Vpp, AC or DC coupled, into either a single or dual video load. A single video load consists of a series 75Ω impedance matching resistor connected to a ter- minated 75Ω line, this presents a total of 150Ω of loading to the part. A d...

· BR93L56F-WE2754

· BD-32X

Features: As with all Maxim devices, ESD protection structures are incorporated on all pins to protect against ESD encoun- tered during handling and assembly. The BD-32XEs transmitter output has extra protection against static electricity. Maxim has developed state-of-the-art struc- tures enabling this...

· BSM75GB120DN1

Description: The ADP3181 also includes programmable no-load offset and slope functions to adjust the output voltage as a function of the load current so that it is always optimally positioned for a system transient. The ADP3181 provides accurate and reliable short-circuit protection, adjustable curren...

Applications: Functional Tests (In Freescale Test Fixture, 50 ohm system) VDD = 28 Vdc, IDQ = 450 mA, Pout = 11.5 W Avg., f1 = 2112.5 MHz, f2 = 2122.5 MHz and f1 = 2157.5 MHz, f2 = 2167.5 MHz, 2 - carrier W - CDMA, 3.84 MHz Channel Bandwidth Carriers. ACPR measured in 3.84 MHz Channel Bandwidth @ 5 MHz O...

Features: The BSM75GB120DN1, BSM75GB120DN1, BSM75GB120DN1, BSM75GB120DN1, BSM75GB120DN1, BSM75GB120DN1 microcontrollers are members of the 8-bit HCMOS BSM75GB120DN18x family, a series of devices spe- cially oriented to TV applications. Different ROM size and peripheral configurations are available ...

· BYS75-45

Vendor:MOT   Package Cooled:96   D/C:96   

Description: The 74HC/HCT594 are high-speed, Si-gate CMOS devices, and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard No. 7A. The 74HC/HCT594 contain an 8-bit, non-inverting, serial-in, parallel-out shift register that feeds an 8-bit D-t...

Applications: The BYS75-45 is a high-speed phase-lock loop (PLL) clock buffer, designed to address high-speed clock distribution applications. The zero delay is achieved by aligning the phase between the incoming clock and the output clock, operable within the range of 10 to 200MHz. The BYS75-45 is an...

Features: C 32-bit Version of the CPU32 Core (Fully Compatible with the CPU32) C Background Debug Mode C Byte-misaligned Addressing Up to 32-bit Data Bus (Dynamic Bus Sizing for 8 and 16 Bits) Up to 32 Address Lines (At Least 28 Always Available) Complete Static Design (0 - 25 MHz Operation) Slave...

· BYS7545

· BU4551R

Vendor:N/A   Package Cooled:05+   D/C:ROHM   

Description: The analog signal input. Internally biased at VDD/2, this input requires an external coupling capacitor. The source impedance should be less than 100 . Output channel noise levels will improve with an even lower source impedance. See Figure 3. Negative Supply No Connection The recov...

Applications: HN58X24xxSI series are two-wire serial interface EEPROM (Electrically Erasable and Programmable ROM). They realize high speed, low power consumption and a high level of reliability by employing advanced MNOS memory technology and CMOS process and low voltage circuitry technology. They also h...

Features: The BU4551R Series are 128Mx72bits ECC Synchronous DRAM Modules. The modules are composed of thirty six 64Mx4bits CMOS Synchronous DRAMs in 400mil 54pin TSOP-II stack package, one 2Kbit EEPROM in 8pin TSSOP package on a 168pin glass-epoxy printed circuit board. One 0.22uF and one 0.0022uF deco...

· BZX84C22VGS08

· BZX84C22-V-GS08

Description: functional operation of the device at these or any other conditions beyond those indicated under recommended operating conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

Applications: Chip ground. Current return for both the low-side gate-drive currents and the bias current of the IC. All of the ground connections of the bias components should be tied to a track going to this pin and kept separate from any pulsed current return.

Features: The BZX84C22-V-GS08 is a single chip USB flash memory reader controller which supports not only the widely used flash memory cards, such as Compact Flash (CF) card, Micro Drive (MD), SmartMedia Card (SMC), XD Picture Card, Memory Stick (MS), Memory Stick Duo, Memory Stick PRO, Secure Digita...

· BSC022N03SGINFINEONP-TDSON-805/06+

· BUK7219-55

· BLM41PG102SN1L00-03

Vendor:MURATA   Package Cooled:SMD   D/C:08+   

· B32-2100

· BSM300GB320DLC

· BF399

Vendor:MOT   Package Cooled:CAN   D/C:06+   

Description: The bq24007 and bq24008 provide the timer-enable function, allowing the host to disable the charge timer when charge current is shared with a load or when the battery is absent. This feature is ideal for applications such as cellular phones, PDAs, and internet appliances.

Applications: pins 2 & 8 connected See application schematic See application schematic Over Vin range Per Bellcore TR-332 50% stress, Ta =40C, ground benign Per Mil-Std-883D, method 2002.3, 1ms, half-sine, mounted to a fixture Mil-Std-883D, Method 2007.2, 20-2000Hz, soldered in PCB

Features: NEC's BF399 and BF399 are Silicon Monolithic ICs designed for use as AGC amplifiers for digital CATV, cable modems and IP telephony systems. These ICs consist of a two stage gain control amplifier and a fixed video gain amplifier. The devices provide a differential input and differ- enti...

· BA10324AF-FE2

Vendor:ROHM   Package Cooled:4   D/C:SOP   

Description: All programmable elements, including the routing resources, are controlled by values stored in static memory cells. These values are loaded in the memory cells during configuration and can be reloaded to change the functions of the programmable elements.

Applications: FLBA10324AF-FE2: Open-drain, active-low indication that BA10324AF-FE2 has shut down due to a faulted load. BA10324AF-FE2his happens if the load current stays limited by the linear current amplifier for more than the fault time (time to charge the FLBA10324AF-FE2BA10324AF-FE2IM capacitor). FL...

Features: Stanford Microdevices BA10324AF-FE2 is a high performance Gallium Arsenide Hetrojunction Bipolar Transistor MMIC Amplifier. A Darlington configuration is utilized for broadband perfor- mance up to 3 GHz. The heterojunction increases break- down voltage and minimizes leakage current betwee...

· BXB60-5094-TL1

Vendor:ARTESYN   Package Cooled:module   D/C:N/A   

· BYW29ED-200

Vendor:SOT428/TO-252   Package Cooled:7850   D/C:PH   

Description: All information contained in this document is subject to change without notice. The prod- ucts described in this document are NOT intended for use in implantation or other life support applications where malfunction may result in injury or death to persons. The infor- mation contained in thi...

Applications: temperature will exceed 125C when over-temperature protection is active. Continuous operation above the specified maximum operating junction temperature may impair device reliability. Note 6: Guaranteed but not tested. Note 7: Maximum recommended SYNC frequency = 500kHz. Note 8: In applicatio...

Features: Quad D-MOS switch Free configurable as bridge or quad-switch Optimized for DC motor management applications Low RDS ON: 26 mΩ high-side switch, 14 mΩ low-side switch (typical values @ 25 C) Maximum peak current: typ. 42 A @ 25 C= Very low quiescent current: typ. 4 µA @ 25...

· BTS933

Description: Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or us...

Applications: Features • International standard packages JEDEC TO-268 and PLUS247 (hole- less TO-247) • High frequency IGBT and antparallel FRED in one package • New generation HDMOSTM process • High current handling capability • MOS Gate turn-on fordrive simplicity...

Features: Full-step (2 phase) and half-step operation are externally selectable. Two-phase drive energizes two adjacent phases in each detent position (AB-BC-CD-DA). This sequence mode offers an improved torque- speed product, greater detent torque, and is less susceptable to motor resonance. Half-...

· BA6851AFP

Description: The HUF76112SK8 is an Application-Specific MOSFET optimized for switching when used as the upper switch in synchronous buck applications. The low gate charge and low input capacitance results in lower driver and lower switching losses, thereby increasing the overall system efficiency.

Applications: A family of products offers 3-line, 2-line, and simple decod- ers in 8-bit and 10-bit versionsall in a pin and software- compatible format. Serial and parallel control ports are pro- vided. These submicron CMOS devices are packaged in a 100-lead Metric Quad Flat Pack (MQFP).

Features: The BA6851AFP is a phase-locked loop (PLL) frequency synthesizer intended for use in a frequency generation loop with an external dual modulus prescaler and VCO. The VCO frequency is divided by the dual modulus prescaler, which is then fed to the internal A and N counters. The reference ...

· BZX85C22V

Description: Controller (host) will send start bit. Controller (host) sends the write address D2 (H) ICS clock will acknowledge Controller (host) sends the begining byte location = N ICS clock will acknowledge Controller (host) will send a separate start bit. Controller (host) sends the read add...

Applications: 1. Torque rating applies with use of compression washer (B52200-F006 or equivalent). Mounting torque in excess of 6 in. lb. does not appreciably lower case-to-sink thermal resistance. Anode lead and heatsink contact pad are common. (See AN209B). For soldering purposes (either terminal conn...

Features: The base timer is an 8-bit counter with a 1MHz clock source. The base timer can be enabled/disabled by the CPU. After a reset, the base timer is disabled and cleared. The base timer can be preset by writing BT7 - BT0 to the BT register at any time. When enabled, the base timer starts counting ...

· BDP31

Description: • International standard package JEDEC TO-247 AD • High Voltage BIMOSFETTM - replaces high voltage Darlingtons and series connected MOSFETs - lower effective RDS(on) • Monolithic construction - high blocking voltage capability - very fast turn-off characteristic...

Applications: Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions outside of those listed in the operational sections of this specifica- tion is not ...

Features: ADVANCE INFORMATION documents contain information on products in the formative or design phase development. Characteristic data and other specifications are design goals. ICS reserves the right to change or discontinue these products without notice.

· B45196T2685K109

Vendor:capacitance   Package Cooled:EPCOS   D/C:08+   

· BN158S

Applications: The BN158S is a high-speed 32K x 16 (512K bit) Bank-Switchable Dual-Ported SRAM organized into four independent 8K x 16 banks. The device has two independent ports with separate controls, addresses, and I/O pins for each port, allowing each port to asynchronously access any 8K x 16 memory bl...

Features: The BN158S multirate limiting amplifier functions as a data quantizer for SONET, Fibre-Channel, and Gigabit Ethernet optical receivers. The amplifier accepts a wide range of input voltages and provides selectable-level, current-mode logic (CML) output voltages with con- trolled edge speeds. A...

· BU2879AK

Vendor:ROHM   Package Cooled:QFP-44   D/C:02   

Description: 1. Solder the copper pad on the backside of the device package to the ground plane. 2. Use a large ground pad area with many plated through-holes as shown. 3. We recommend 1 or 2 ounce copper. Measurement for this data sheet were made on a 31 mil thick FR-4 board with 1 ounce copper ...

Applications: The EL4583 sync slice level is set to the mid-point between sync tip and the blanking level. This 50% point is determined by two internal sample and hold circuits that track sync tip and back porch levels. It provides hum and noise rejection and compensates for input levels of 0.5V to 2.0...

Features: The USB port of the BU2879AK is connected to a host computer directly or via the downstream port of a USB hub. Host software issues commands and data to the BU2879AK and receives status and data from the BU2879AK using standard USB protocol.

· BCM4401KQLG-P20

Vendor:BROADCOM   Package Cooled:TQFP   D/C:06+   

· BCM4401KQLGP20

Vendor:BROADCOM   Package Cooled:TQFP128   D/C:0746+0   

· BF511

Description: The FM1233A permits a pushbutton (or a signal) to initiate a reset externally. Once this external reset is detected on the reset pin, FM1233 also actively asserts the reset signal to main- tain the Reset Timeout period when the external reset is not present .

Applications: High current sink/source 25 mA/25 mA Up to four external interrupt pins Up to three 16-bit timer/counters Up to two 8-bit timer/counters with 8-bit period register (time-base for PWM) Secondary LP oscillator clock option - Timer1 Up to five Capture/Compare/PWM (CCP) modules CCP pins can be ...

Features: The BF511 member of the CryptoMemory family is a high-performance secure memory providing 256 Kbits of user memory with advanced security and cryptographic features built in. The user memory is divided into 16 2-byte zones, each of which may be individually set with different security acces...

· BT150S-650

Vendor:PHILIPS   Package Cooled:TO-220   D/C:08/09+   

· BLM11B050SBP

Description: NOTE:The CT capacitor must be connected between this pin and GND, not VIN, to assure that the SD/CT pin is not pulled significantly negative during power-up. This pin should not be externally driven more negative than C5 V or the device will be damaged.

Applications: Stresses beyond those listed under Absolute Maximum Ratings may cause permanent dam- age to the device. This is a stress rating only and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this specification is not i...

Features: Note: Both regulators can be bypassed if external regulation is desired. When bypassing the analog regulator, the VBATT_ANA and VCC_OUT pins must be tied together and the external analog voltage (1.8 V) should be applied to the VBATT_ANA pin. When bypassing the digital regulator, the VBATT_DI...

· BZY91C3V9B

· BC850-C-MTF/8E

Description: System timing is simplified in that the on-chip edge-triggered register allows the PROM clock to be derived directly from the system clock without introducing race conditions. The on-chip register timing requirements are similar to those of discrete registers available in the market.

Applications: data inputs is HIGH. Odd parity is indicated (O output is HIGH) when an odd number of data inputs is HIGH. Parity checking for words larger than nine bits can be accom- plished by tying the E output to any input of an additional AC280, ACT280 parity checker.

Features: The BC850-C-MTF/8E, BC850-C-MTF/8E, BC850-C-MTF/8E, and BC850-C-MTF/8E are ultra-low voltage noise, high speed voltage feedback amplifiers that are ideal for applications requiring low voltage noise, including communications and imaging. These devices offer extremely low power consumption for ...

· B69843N3557A120

Description: Wait or Transfer Acknowledge. When configured as wait, this signal is asserted low during a memory and peripheral device bus transaction to extend the bus cycle. When configured as transfer acknowledge, this signal is asserted low dur- ing a memory and peripheral device bus transaction to s...

Applications: characteristics that are fully compatible with 54/74 LSTTL logic families. M54/74HCT devices are designed to directly interface HSC2MOS systems with TTL and NMOS components. They are also plug in replacements for LSTTL devices giving a reduction of power consumption. IT IS PROHIBITED ...

Features: The B69843N3557A120/6490/8390/8490 Rev. B3 parts you have received conform functionally to the Device Data Sheet (DS39629), except for the anomalies described below. Any Data Sheet Clarification issues related to the B69843N3557A120/6490/8390/8490 will be reported in a separate Data She...

· BLM31PG601SH1B

Vendor:880000   Package Cooled:MURATA   D/C:2008   

· BA6925FS

Description: The MAX6043 precision voltage reference provides accurate preset +2.5V, +3.3V, +4.096V, +5.0V, and +10V reference voltages from up to +40V input volt- ages. The MAX6043 features a proprietary temperature coefficient curvature-correction circuit and laser- trimmed thin-film resistors that resu...

Applications: The Dallas Semiconductor DS1804 is built to the highest quality standards and manufactured for long term reliability. All Dallas Semiconductor devices are made using the same quality materials and manufacturing methods. However, the flip-chip package version of the DS1804 is not exposed to e...

Features: NOTES: 1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specificatio...

· BZT52-B27S

Vendor:ON   Package Cooled:SMD   D/C:06+   

· BU12106-0N

· BC817K16E6327XT

· BU508/A/AF/DF

Vendor:PHILIPS   Package Cooled:3000   D/C:TO-247   

· BXB75-48D3V3-1V801

Description: /RCS0 -->/CS : SDRAMs D0-D8 /RCS1-->/CS : SDRAMs D9 - D17 RBA0-RBA1--> : BA0-BA1:SDRAMs D0-D17 RA0 -R A11 -->A0 - A11 : SDRAMs D0 - D17 /RRAS --> /RAS : SDRAMs D0 - D17 /RCAS --> /CAS : SDRAMs D0 - D17 RCKE0 --> CKE : SDRAMs D0 - D8 RCKE1 --> CKE : SDRAMs D9-D17 /RW...

Applications: The DAC5687 is a dual-channel 16-bit high-speed digital-to-analog converter (DAC) with integrated 2x, 4x, and 8x interpolation filters, a complex numerically controlled oscillator (NCO), on-board clock multiplier, IQ compensation and on-chip voltage reference. The DAC5687 is pin compati...

Features: This circuit uses a darlington pair topology with resistive feedback for broadband performance as well as stability over its entire temperature range. Internally matched to 50 ohm impedance, the BXB75-48D3V3-1V801 requires only DC blocking and bypass capacitors for external components.

· BSH299

Vendor:PHILIPS   Package Cooled:08+   D/C:S0T-23   

Description: NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for general information only. 3. Body contour is optional within zone defined by CD and PS1. 4. These dimensions should be measured at points 0.050 inch (1.27 mm) 0.055 inch (1.40 mm) below seating plane. When gauge ...

Applications: • IEEE 802.3z Gigabit Ethernet Compliant • Supports 1.25 Gbps Using NRZ Coding over uncompensated twin coax cable • Fully integrated CMOS IC • Low Power Consumption • ESD rating >2000V (Human Body Model) or > 200V (Ma- chine Model) • 5-Volt ...

Features: The BSH299 uses advanced trench technology to provide excellent RDS(ON), low gate charge and operation with gate voltages as low as 1.8V while retaining a 12V VGS(MAX) rating. This device is suitable for use as a uni-directional or bi-directional load switch, facilitated by its common-drain c...

· BM87C809N0A684

· BQ20Z70PW-V150

Vendor:TI   Package Cooled:TSSOP20   D/C:0810+   

· BS05N1HFAA

· B45196H0476K309

Vendor:capacitance   Package Cooled:EPCOS   D/C:08+   

· BCR185FE6327XT

· BUT90M

· BCM7021RRPB

Vendor:BROADCOM   Package Cooled:N/A   D/C:07+   

· BZX85C7

· BK/GMT-5A

Vendor:-   Package Cooled:DIP/SMD   D/C:06+   

Description: 45V zener diode between VBAT and ground with a 500Ω resistor in series with the battery supply and the VBAT pin is required to protect the device from power transients. An external blocking diode is required to provide reverse battery protection. Over-temperature monitor turns off the c...

Applications: The M54/74HCT157 and the M54/74HCT158 are high speed CMOS QUAD 2-CHANNEL MULTI- PLEXERs fabricated with silicon gate C2MOS tech- nology. They achieve the high speed operation similar to equivalent LSTTL while maintaining the CMOS low power dissipation.

Features: If Autovectoring is enabled (AV2EN = 1 in the INTSETUP register), the FX2 substitutes its INT2VEC byte. Therefore, if the high byte (page) of a jump-table address is preloaded at location 0x0044, the automatically-inserted INT2VEC byte at 0x0045 will direct the jump to the correct address...

· BU4S71-TR

Vendor:ROHM   Package Cooled:SOT153   D/C:2   

Description: Note: Agilent Technologies encoders are not recommended for use in safety critical applications. Eg. ABS braking systems, power steering, life support systems and critical care medical equipment. Please contact sales representative if more clarification is needed.

Features: The BU4S71-TR power amplifier is designed for high performance WLAN applications in the 4.9 to 5.35 and 5.15 to 5.85 GHz frequency bands. The low profile 16 pin 3 x 3 x 0.9 mm package with internal matching on both input and output to 50Ω minimizes next level PCB space and allows ...

· BU4S71TR

Vendor:ROHM   Package Cooled:12000   D/C:07+   

Description: FEATURES • The NL series are available in five form factors ranging from 2016 to 5650. • Utilizing a miniaturized winding structure, these products provide high Q characteristics. • Inductance tolerance is 5 percent.

Applications: Short Circuit Applied to Output When a heavy load is applied, a large transient current may flow until the current limit circuitry will respond. Once this occurs, the device limits current to less than the short-circuit current limit specification.

Features: Reset: A low on this pin resets the microcontroller, causing I/O ports and peripherals to take on their default states, and the processor to begin execution at the address contained in the reset vector. Refer to the section on Reset for details.

· BCR405U

Description: NOTES 1Absolute maximum ratings apply to both DICE and packaged parts, unless otherwise noted. 2JA is specified for worst case mounting conditions, i.e., JA is specified for device in socket for cerdip, P-DIP, and LCC packages; JA is specified for device soldered to printed circuit board fo...

Applications: and 4 to 40 V Low current consumption of less than 0.8 mA Integrated output stage for up to 60 mA output current Short-circuit and overload protection of output stages and external components Temperature response of the IC compensates that of the coil High noise immunity High switching fr...

Features: MXIC's Flash technology combines years of EPROM experience to produce the highest levels of quality, relia- bility, and cost effectiveness. The BCR405U electri- cally erases all bits simultaneously using Fowler-Nord- heim tunneling. The bytes are programmed one byte at a time using the ...

· BSME500ESS330MHB5D

· BZX84C5V6T/R

Vendor:PANJIT   Package Cooled:23-5.6V   D/C:05+   

Description: Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America

Applications: Output Enable, asynchronous input, active LOW. Combined with the synchronous logic block inside the device to control the direction of the I/O pins. When LOW, the I/O pins are allowed to behave as outputs. When deasserted HIGH, I/O pins are tri-stated, and act as input data pins. OE is maske...

Features: Notes: 1. The Voltage on any input or I/O pin cannot exceed the power pin during power-up. 2. TA is the instant on case temperature. 3. See the last page of this specification for Group A subgroup testing information. 4. See the Introduction to CMOS PROMs section of the Cypress Data Book fo...

· BZX84-C5V6T/R

Description: The value of the capacitor is recommended to be the line length (time) divided by 3 times the resistor value. Example: if the transmission line is 1,000 feet long, (approximately 1000 ns), and the termination resistor value is 180Ω, the capacitor value should be 1852 pF. For additio...

Applications: PARAMETER VCC Under-Voltage Lockout Start Threshold Stop Threshold Hysteresis General VCC Supply Current VIDPWR Supply Current VOSNS- Current VRHOT Comparator HOTSET Bias Current Output Voltage VRHOT Leakage Current Threshold Hysteresis

Features: Not only support the programmable gain from 0 to 22.5 dB with 16 steps and 1.5 dB/step, but also fully differentially drive -5 dBm power over 300 ohms. If switches SWE , SWJ , and SWK are opened, then the line driver will be muted to -70dB automatically. In addition, when SWJ or SWK are tur...

· B45197A3686K409

Vendor:capacitance   Package Cooled:SMD   D/C:06+   

· BF998B-GS08

Vendor:SOT-4   Package Cooled:9000   D/C:VISHAY   

Description: When ACK is asserted and JAM is HIGH, an active IMR+ device is in a collision state. When JAM is as- serted, the state of DAT will indicate either a multiport (DAT = 0) or single-port (DAT = 1) collision condition. When ACK is not asserted, the state of JAM is ignored.

Applications: Output Threshold Adjust The state of the OUT pin is driven by a voltage comparator whose output state depends on the level of the input voltage on the sample capacitor and the level of an adjustable 8-bit threshold voltage. The threshold is adjusted by shifting data bits into the D/A Regis...

Features: Note 8 Package thermal resistance indicates the ability of the package to dissipate heat generated on the die Given ambient temperature and power dissipation the thermal resistance parameter can be used to determine the approximate operating junction temperature Operating junction temperature...

· BD192

· BCX55-16.115

· BSX38A

Vendor:PH   Package Cooled:CAN3   D/C:07/08+   

Description: Charges Single Cell Li-Ion Batteries Directly from USB Port Load Dependent Charging Guarantees USB Input Current Compliance Automatic Battery Switchover When Input Supply is Removed Constant-Current/Constant-Voltage Operation with Thermal Feedback to Maximize Charging Rate Without Risk of ...

Applications: Secondary Reference (Input). This is one of two (PRI & SEC) input reference sources (falling edge) used for synchronization. One of four possible frequencies (8kHz, 1.544MHz, 2.048MHz or 19.44MHz) may be used. The selection of the input reference is based upon the MS, and RSEL, control in...

Features: During configuration, either the parallel, microprocessor, or serial loading is selected. When in the load mode, the memory outputs are undefined. Please refer to the BSX38A block diagram and notice that, even though the memory outputs are undefined, several valid outputs may be in the proces...

· BZX84C3V9_NL

· BLM18EG221SN1J

Vendor:990000   Package Cooled:MURATA   D/C:2008   

· BC638B

Vendor:PHILPS   Package Cooled:N/A   D/C:N/A   

Description: Widebus  Family Output Ports Have Equivalent 22-Ω Series Resistors, So No External Resistors Are Required Support Mixed-Mode Signal Operation (5-V Input and Output Voltages With 3.3-V VCC ) Support Unregulated Battery Operation Down to 2.7 V Typical VOLP (Output Ground Bounc...

Applications: The BC638B is high-speed CMOS 1-8 multiplexer/demultiplexer. The low on resistance of the switch allows connections to be made with minimal propagation delay time. This device is 1 to 8 multiplexer/demultiplexer controlled by the combination of select inputs (S0, S1, S2) and output enab...

Features: Internally, an actual memory write occurs after the 8th data bit is transferred. It will be complete before the acknowledge is sent. Therefore, if the user desires to abort a write without altering the memory contents, this should be done using start or stop condition prior to the 8th d...

· BB3550AM

Vendor:BB   Package Cooled:CAN   D/C:06+   

Description: Gain Bandwidth Product at VCE = 2 V, IC = 20 mA, f = 2.0 GHz Gain Bandwidth Product at VCE = 1 V, IC = 10 mA, f = 2.0 GHz Minimum Noise Figure at VCE = 2 V, IC = 3 mA, f = 2.0 GHz Minimum Noise Figure at VCE = 1 V, IC = 3 mA, f = 2.0 GHz Insertion Power Gain at VCE = 2V, IC =20 ...

Applications: DATA POLLING: The AT49BV16X4(T) features DATA polling to indicate the end of a program cycle. During a pro- gram cycle an attempted read of the last byte/word loaded will result in the complement of the loaded data on I/O7. Once the program cycle has been completed, true data is valid on ...

Features: • SuperFAST HIGH DENSITY IN-SYSTEM PROGRAMMABLE LOGIC 8000 PLD Gates 96 I/O Pins, Nine or Twelve Dedicated Inputs 192 Registers High Speed Global Interconnect Wide Input Gating for Fast Counters, State Machines, Address Decoders, etc. Small Logic Block Size for Rand...

· BZT52-B24

Vendor:ON   Package Cooled:SMD   D/C:06+   

· BLM11B221SBPTM00(BLM18BB221SN1D)

Vendor:MURATA   Package Cooled:0603-221   D/C:05+   

Description: wide variety of external capacitors, and the compact SOT23-5 surface-mount package. The FAN2502/03 family of products offer significant improvements over older BiCMOS designs and are pin-compatible with many popular devices. The output is thermally protected against overload.

Applications: TI warrants performance of its semiconductor products and related software to the specifications applicable at the time of sale in accordance with TIs standard warranty. Testing and other quality control techniques are utilized to the extent TI deems necessary to support this warranty. Spec...

Features: The BLM11B221SBPTM00(BLM18BB221SN1D) operates in forced continuous operation and provides tracking of another power supply rail. Forced continuous operation reduces noise and RF interference and provides excellent transient response. Fault protection is provided by an overcurrent comparator, a...

· B11B-PH-SM4-TB(LF)(SN)

Vendor:JST   Package Cooled:N/A   D/C:06+   

Description: The following discussion refers to the schematic below. In operation, approximately 6.3 volts is applied to the noninverting input of the op amp. The voltage is amplified by the op amp to produce a 10.000V output. The gain is determined by the networks R1 and R2: G=1 + R2/R1. The 6.3V zener...

Applications: • For indirect jumps and calls that use a 16-bit DAG address register for part of the branch address, the Program Sequencer relies on an 8-bit Indirect Jump page (IJPG) register to supply the most significant eight address bits. Before a cross page jump or call, the program mus...

Features: Utilizes a fully automatic voltage regulated two-rate cur- Battery supplies 90 minutes of emergency power rent limited solid-state charger -- initially provides a high rate charge upon restoration of AC power, and provides Code Compliance trickle charge to maintain batteries at full capacity ...

· BB639CE7908

Description: This output is an open collector stage which requires a pull-up resistor, RL, to +VS for proper operation. It can sink 5 mA of load current. When decoding FSK signals the FSK data output will switch to a ÒhighÓ or off state for low input frequency, and will switch to a &Ograv...

Applications: Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. E...

Features: This serie of T-module uses fast recovery power diodes in a single diode configuration. The semiconductors are elec- trically isolated from the metal base, allowing common heatsink and compact assemblies to be built. These single diode modules can be used in conjunction with the thyristo...

· BZX79C33113

Description: NOTES: 1Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only and functional operation at or above this specification is not implied. Exposure to maximum rating conditions for extended periods may affect device re...

Applications: Note: (1) Available voltage is : 0.5V(FB=VO), 1.0V(FB=GND) or Output voltage can be adjusted using external resistors, see Pin Descriptions. (2) Only available in tape and reel packaging 2500 devices for the SOIC-8EDP package. (3) Lead free product. This product is fully WEEE and RoHS co...

Features: The BZX79C33113 is a laser diode driver for the operation of two different grounded laser diodes for DVD-RAM (650 nm) and CD-RW (780 nm) drives. It includes three chan- nels for three different optical power levels which are controlled by a separate IC. The read channel generates a continuo...

· BS62LV1025SC-55

Vendor:BSI   Package Cooled:SOP32W   D/C:2007+   

· BH6575FV

Vendor:ROHM   Package Cooled:SOP40   D/C:07+   

Description: Sector Protection C Any combination of sectors may be locked to prevent program or erase operations within those sectors Temporary Sector Unprotect C Allows changes in locked sectors (requires high voltage on RESET# pin) Internal Erase Algorithm C Automatically erases a sector, any ...

Features: The Hynix BH6575FV Series are 32Mx72bits ECC Synchronous DRAM Modules. The modules are composed of eighteen 32Mx4bits CMOS Synchronous DRAMs in 400mil 54pin TSOP-II package, one 2Kbit EEPROM in 8pin TSSOP package on a 200pin glass-epoxy printed circuit board. One 0.22uF and one 0.0022uF decoup...

· BZV55B13115

Description: DMA Controller (DMAC) • 5 channels • External external 2.5 access cycles / transfer (if 2 clock cycles are defined as 1 access cycle) • Internal external 1.5 access cycles / transfer (if 2 clock cycles are defined as 1 access cycle) • Address register (inc, dec, ...

Applications: NOTE 4: Unused Rext/Cext terminals should be left unconnected. All remaining unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, literature number SCBA004.

Features: Stanford Microdevices BZV55B13115 amplifier is a high efficiency GaAs Heterojunction Bipolar Transistor (HBT) MMIC housed in low-cost surface-mountable plastic package. These HBT MMICs are fabricated using molecular beam epitaxial growth technology which produces reliable and consistent perfo...

· BCP69T1/CE

· BCS19

· B952AS-470M

Vendor:TOKO   Package Cooled:DS104C2   D/C:07+   

· BUK7508-55

Description: The AD581 is ideal for application with the entire AD7533 series of 10- and 12-bit multiplying CMOS D/A converters, especially for low power applications. It is equally suitable for the AD7574 8-bit A/D converter. In the standard hook-up, as shown in Figure 14, the +10 volt reference is i...

Applications: The transmitter includes a PLL to multiply the reference clock to the transmission frequency. The receiver provides adaptive equalization for accurate clock and data recovery. The 78P2253 is built in a BiCMOS technology for high performance and low power operation. It operates with a 3.3V or ...

Features: NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for general information only. 3. These dimensions should be measured at points 0.050 inch (1.27 mm) and 0.055 inch (1.40 mm) below seating plane. Measurement will be made at the seating plane. 4. The seating plane of the...

· BSR14(3K/RL)D/C01

· B9080

Vendor:EPCOS   Package Cooled:DCS4M   D/C:08+   

· BZX55A3V0

· BZG05C-75

Vendor:VISHYA   Package Cooled:SMA/DO-214AC   D/C:2009+   

· BVU-5K5QH2

Vendor:.   Package Cooled:.   D/C:07+   

· BU2896AK

Vendor:ROHM   Package Cooled:N/A   D/C:08+   

Description: Parameter TEC CURRENT MEASUREMENT ITEC Gain ITEC Output Range ITEC Input Range ITEC Bias Voltage ITEC Output Current TEC VOLTAGE MEASUREMENT VTEC Gain VTEC Output Range VTEC Bias Voltage VTEC Output Current VOLTAGE LIMIT VLIM Gain VLIM Input Range VLIM Input Current, cooling VLIM I...

Applications: The BU2896AK is a complete linear CIS or CCD sensor signal processor on a single monolithic chip. The BU2896AK includes a high speed 8-bit resolution ADC, a 6-bit Programmable Gain Amplifier with gain adjust- ment of 1 to 10, and a typical 8-bit programmable input referred offset calibr...

Features: When the switch current reaches the current limit, the parts operate in a constant-current mode to prohibit excessive currents from causing damage. For the BU2896AK and BU2896AK if the constant current condition still persists after 10ms, these parts will shut off the switch. The BU2896AK...

· BAT51

· BUS132A

Description: Output frequency range: 1450 MHz to 1750 MHz Divide-by-2 output 3.0 V to 3.6 V power supply 1.8 V logic compatibility Integer-N synthesizer Programmable dual-modulus prescaler 8/9, 16/17, 32/33 Programmable output power level 3-wire serial interface Analog and digital lock detect Hardwa...

Applications: The HT24LC04 uses the A2 and A1 inputs for hard wire addressing and a total of four 4K devices may be addressed on a single bus system. The A0 pin is not connected. (The device addressing is discussed in detail under the Device Addressing section).

Features: The AMBUS132AAC and BUS132AAC are characterized for operation from 0C to 70C. The AMBUS132AAI is characterized for operation from C40C to 85C. The AMBUS132AAM and BUS132AAM are characterized for operation over the full military temperature range of C55C to 125C.

· BCM5100KPF

Description: Memories C 1K, 2K or 4K bytes Program memory (OTP, EPROM, FASTROM or ROM) with read-out protection C 64 bytes RAM Clock, Reset and Supply Management C Enhanced reset system C Low Voltage Detector (LVD) for Safe Reset C Clock sources: crystal/ceramic resonator or RC network, extern...

Applications: Improved Connectivity (Additional Feedback Routing, Alternate Input Routing) Output Enable Product Terms D Latch Mode Combinatorial Output with Registered Feedback within Any Macrocell Three Global Clock Pins Fast Registered Input from Product Term Programmable Pin-keeper Option VCC Power-u...

Features: The FMS6346 Low Cost Video Filter (LCVF) provides 6dB gain (9dB optional, contact factory for further information) from input to output. In addition, the input will be slightly offset to optimize the output driver performance. The offset is held to the minimum required value to decrease t...

· BCM6352

Vendor:BROADCOM   Package Cooled:BGA   D/C:00+   

· B-7907

Vendor:FCI   Package Cooled:08+   D/C:10000   

· BCM5461SA3KFB

Description: The error signal from the optocoupler is fed into this input. It is loaded with a 2.7 kW resistor which converts the opto current into a voltage. There is a 7.0 kHz, single pole, low pass filter between this pin and the error amp input. A 10 volt clamp is also connected to this pin to prote...

Applications: An internal 2.048V precision bandgap reference sets the full-scale range of the ADC. A flexible reference structure allows the use of this internal or an externally applied ref- erence, if desired, for applications requiring increased accuracy or a different input voltage range. The BCM5461SA...

Features: 4.4.2 Group B inspection. Group B inspection shall be conducted in accordance with the conditions specified for subgroup testing in table VIb (JAN, JANTX), of MIL-PRF-19500. Electrical measurements (end points) and delta requirements shall be in accordance with the applicable steps of table ...

· BUX17A

Description: At any time, the FIFO can be reset to an empty state by putting the ADS-930 into its "direct" mode (logic "0" applied to pin 23, FIFO/DIR) and also applying a logic "0" to the FIFO READ line (pin 10). The empty status of the FIFO will be indicated by FSTAT1 g...

Applications: The MAX1156/MAX1158/MAX1174 are ideal for high- performance, battery-powered, data-acquisition appli- cations. Excellent AC performance (THD = -100dB) and DC accuracy (1LSB INL) make the MAX1156/ MAX1158/MAX1174 ideal for industrial process control, instrumentation, and medical applications. ...

Features: Series W. Series W are rugged, ceramic, cylindrically shaped elements for use in the temperature range from -50 to 600C (-58 to 1112F). Elements have .015" gold palladium alloy leads approximately 0.4" long, which are strain relieved in the stress free ceramic body. Eleme...

· BD6878GUW

Vendor:ROHM   Package Cooled:05+   D/C:BGA   

Description: The information, diagrams, and other data in this manual are correct and reliable; however, MagnaChip Semiconductor Ltd. is in no way responsible for any violations of patents or other rights of the third party generated by the use of this manual.

Applications: The ADS5423 is available in a 52 pin HTQFP with heatsink package and is pin compatible to the AD6645. The ADS5423 is built on state of the art Texas Instruments complementary bipolar process (BiCom3) and is specified over full industrial temperature range (−40C to 85C).

Features: Note 1: All data listed in the above graphs, except for derating data, has been developed from actual products tested at 25C. This data is considered typical data for the ISR. Note 2: Thermal derating graphs are developed in free air convection cooling of 40-60 LFM soldered in a printed circ...

· BUT232V

Description: Parameter VDD to GND VA, VB, VW to GND Maximum Current IWB, IWA Pulsed IWB Continuous (RWB 1 kΩ, A open)1 IWA Continuous (RWA 1 kΩ, B open)1 Digital Inputs and Output Voltage to GND Operating Temperature Range Maximum Junction Temperature (TJ max) Storage Temperature ...

Applications: For the adjustable output controller, the VREF pin allows great flexibility for the designer. Taking a simple resistor divider tied to an external voltage source and connecting the divider to the VREF pin allows the controller to regulate an output voltage that is some fraction of the exter...

Features: The accelerated program (ACC) feature allows the system to program the device at a much faster rate. When ACC is pulled high to VHH, the device enters the Unlock Bypass mode, enabling the user to reduce the time needed to do the program operation. This feature is intended to increase fac...

· BAW21W

· BAT54RS

Description: NanoStar and NanoFree Packages Optimized for 1.8-V Operation and Is 3.6-V I/O Tolerant to Support Mixed-Mode Signal Operation Ioff Supports Partial-Power-Down Mode Operation Sub 1-V Operable Max tpd of 2.4 ns at 1.8 V Low Power Consumption, 10-µA Max ICC 8-mA Output ...

Applications: The MDU28C tolerances are guaranteed for input pulse widths and periods greater than those specified in the test conditions. Although the device will function properly for pulse widths as small as 100% of the total delay and periods as small as 200% of the total delay (for a symmetric input)...

Features: The SN74LVC2G241 is organized as two 1-bit line drivers with separate output-enable (1OE, 2OE) inputs. When 1OE is low and 2OE is high, the device passes data from the A inputs to the Y outputs. When 1OE is high and 2OE is low, the outputs are in the high-impedance state.

· BFR37

Description: When PWRDWN# is sampled low by two consecutive rising edges of DIFC, all DIFT outputs will be held high or three-stated (depending on the state of the control register drive mode and OE bits) on the next DIFC high to low transition. When the SMBus power-down drive mode bit is programmed to 0,...

Applications: Analog Pins: Each analog pin has been tested to Burr- Brown's analog ESD test consisting of five 1000V positive and negative discharges (100pF in series with 1500Ω) ap- plied to each pin. RFB A, VREF A, RFB B, and VREF B show some sensitivity.

Features: Note 5: Timing specifications are sample tested at +25C to ensure compliance. All input control signals are specified with tr = tf = 20ns (10% to 90% of +5V) and timed from a voltage level of 1.6V. Note 6: t3 and t6 are measured with the load circuits of Figure 1 and defined as the time requir...

· BR100A/B

· B39941-B7841-B7820-C710-S09

· BFT99

· B54101A2282F760

Pages: 76/799  At 10 71 72 73 74 75 76 77 78 79 80 Under 10

Quick Search Part No.

Home About Us Map Online Inquiry
© 2009-2011 ExchangeIC.com Corp.All Rights Reserved