Current position: Home > Products > Index D > Page 22
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9 All

· DM28C256A-250

Vendor:TOSHIBA   Package Cooled:CDIP   D/C:100   

· DLI4050B2

· DM74LS194N

Description: The ISR will operate at no load with reduced specifications. For operation below 0C, use a tantalum type capacitor for C2. See Thermal Derating curves. The tab pins on the 5-pin mount package types (suffixes L & M) must be soldered. For more information see the applicable package outlin...

Applications: (*) CPD is defined as the value of the ICs internal equivalent capacitance which is calculated from the operating current consumption without load. (Refer to Test Circuit). Average operting current can be obtained by the following equation. ICC(opr) = CPD •VCC •fIN + ICC/8 (per circ...

Features: ESD PROTECTION All digital inputs of the DM74LS194N incorporate on-chip ESD protection circuitry. This protection is designed to withstand 2.5kV (using the Human Body Model, 100pF and 1500Ω). However, industry standard ESD protection methods should be used when handling or storing ...

· D11-CR060301K0FCS

· DS18S20+

· D75518GF-361-3B9

Vendor:NEC   Package Cooled:QFP   D/C:97+   

Description: The LM236-2.5, LM336-2.5, and LM336B-2.5 integrated circuits are precision 2.5-V shunt regulator diodes. Thesereference circuits operate as low-temperature-coefficient 2.5-V Zener diodes with a 0.2-Ω dynamic impedance. A third terminal provided on the circuit allows the reference...

Applications: The D75518GF-361-3B9 includes a flexible audio serial port interface, which supports standard and time division multiplexed (TDM) formats. Support for TDM formats simplifies interfacing to DSP serial ports, while supporting a cascade connection for two D75518GF-361-3B9 devices. In additi...

Features: The ID pin can be used to select which data slots on the AC-link are to be used as input to the DAC. This allows 3 x D75518GF-361-3B9 to be used with a single controller that supports 6 channel sound, to output surround sound audio signals. When supporting surround, centre or LFE channels, the...

· DT3316P-224

Vendor:Coilcraf   Package Cooled:SMD   D/C:04 05   

Description: This device contains circuits to protect its inputs and outputs against damage due to high static voltages or electrostatic fields; however, it is advised that precautions be taken to avoid application of any voltage higher than maximum-rated voltages to these high-impedance circuits. Durin...

Applications: Jitter transfer refers to the portion of jitter allowed to transfer from input to output of the CDR, and jitter generation is that produced by the CDR itself. The ITU-T specs for these two parameters must be met for regenerators in a long-haul system, because at each stage the recovered cloc...

Features: To allow for dc coupling to ADCs, its unique output common-mode control circuit maintains the output common-mode voltage within 3 mV offset (typ) from the set voltage, when set within 0.5 V of mid-supply, with less than 4 mV differential offset voltage. The common-mode set point is set ...

· D2SW-P2D

· DEA1X3A181JB2B

· DF12B-32DS-0.5V

· DM05

· DA-20961

· D74HC161C

Vendor:NEC   Package Cooled:DIP16   D/C:2007+   

Description: EE cell S1 controls whether the macrocell will be combi- natorial or registered/latched. S0 controls the output po- larity (active-HIGH or active-LOW). S2 determines whether the storage element is a register or a latch. S3 allows the use of the macrocell as an input register/latch or as ...

Applications: Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use...

Features: The IDTD74HC161CA is a WAN PLL with single reference input. It contains a Digital Phase-Locked Loop (DPLL), which generates ST-BUS clocks and framing signals that are phase locked to a 2.048 MHz, 1.544 MHz or 8 kHz input reference. The IDTD74HC161CA provides eight types of clock signals ...

· D6257

· DSS6NC52A102Q55B

Vendor:Murata   Package Cooled:07   D/C:1,500   

Applications: External Memory Interface C Contains mem- ory access related registers such as Data Pointer High (DPH0), Data Pointer Low (DPL0), Data Page Pointer (DPP0), MOVX @Ri address register (MXAX) and STRETCH registers. It performs the memory addressing and data transfers. Allows applications soft- ...

Features: When the output load exceeds the current-limit threshold or a short is present, the DSS6NC52A102Q55B and DSS6NC52A102Q55B limit the output current to a safe level by switching into a constant-current mode, pulling the overcurrent (OCx) logic output low. When continuous heavy overloads and s...

· D41D8

· DMC80C49-118A

Vendor:SILXONIX   Package Cooled:DIP-40   D/C:new   

Description: EMPTY FLAG (EF) The Empty Flag (EF) will go LOW, inhibiting further read operations, when the read pointer is equal to the write pointer, indicating the device is empty. The Empty Flag (EF) is synchronized with respect to the LOW-to-HIGH transition of the Read Clock (RCLK).

Applications: CMOS compatibility The XTI pad low and high levels are CMOS compatible; XTI pad noise margin is better than typical CMOS pads. TTL compatibility The XTI pad low level is compatible with TTL while the high level is not compatible (for example if VDD = 3V TTL min high level = 2.0V while XTI...

Features: The DMC80C49-118A battery protection IC is designed to protect lithium-ion battery from damage or degrading the lifetime due to overcharge, overdischarge, and/or overcurrent for one-cell lithium-ion battery powered systems, such as cellular phones. The ultra-small package and less required e...

· DA3CB1SB

Vendor:CHERRY   Package Cooled:SALE--STOCK!!   D/C:08+   

· DAC0630CN

Description: 2.3 Order of precedence. In the event of a conflict between the text of this specification and the references cited herein, the text of this specification takes precedence. Nothing in this specification, however, supersedes applicable laws and regulations unless a specific exemption has been...

Applications: Second, keep the maximum currents relatively large (1mA or 2mA) to minimize the error due to Q7. Higher currents could be used, but the small geometry transistors used in the 8038 could give problems due to VCE(SAT) and bulk resistance, etc.

Features: DESCRIPTION The DAC0630CN is an advanced high-speed CMOS 16-BIT BUS BUFFER (3-STATE) fabricated with sub-micron silicon gate and double-layer metal wiring C2MOS technology. Any nG output control governs four BUS BUFFERS. Output Enable inputs (nG) tied together give full 16 bit operat...

· DAC8043AF

· DTC114YKT97

Description: The converters incorporate a fixed frequency single for- ward topology with magnetic feedback and an internal EMI filter. These converters are capable of meeting the conducted emissions and conducted susceptibility re- quirements of MIL-STD-461C without any additional components. All mo...

Applications: The output of the programmable divider is fed to the phase comparator where it is compared in both phase and frequency domain with the comparison frequency. This frequency is derived either from the on-board crystal controlled oscillator or from an external reference source. In both cases the...

Features: The DTC114YKT97/DTC114YKT97 are active power factor controllers specifically designed for use as a preconverter in electronic ballast and in offCline power converter applications. These integrated circuits feature an internal startup timer, a one quadrant multiplier for near unity power fa...

· DS1812A

· D1040

Description: Notes: 1. Repetitive Rating : Pulse width limited by maximum junction temperature 2. L = 0.4mH, IAS = 70A, VDD = 25V, RG = 25 Ω, Starting TJ = 25C 3. ISD 70A, di/dt 300A/µs, VDD BVDSS, Starting TJ = 25C 4. Pulse Test : Pulse width 300µs, Duty cycle 2% 5. Essentially ...

Applications: RECEIVER DC CHARACTERISTICS High Level Output Voltage Low Level Output Voltage Output Short-Circuit Current Output HI-Z Leakage Enable Input HIGH Threshold Enable Input LOW Threshold Input Leakage Current Input Capacitance Differential Input HIGH Threshold Differential Input LOW...

Features: The D1040 is a low-power isolated sampling ADC using state-of-the-art CMOS structures and high volt- age capacitors. The D1040 contains a complete 16-bit capacitor based SAR, ADC with S/H, clock, refer- ence, µP interface, serial out and galvanic isolation. Laser-trimmed scaling res...

· DS26LS31N

Vendor:NSC   Package Cooled:9500   D/C:DIP16   

· DSPIC30F6012A

· DK2A-DC24V

Vendor:NAIS   Package Cooled:Relay(new original)   D/C:08+   

· DE28C64-200

Vendor:SEEQ   Package Cooled:DIP   D/C:CDIP-28   

Description: The receive section of the CY7C9689 HOTLink accepts a se- rial bit-stream from one of two PECL compatible differential line receivers and, using a completely integrated PLL Clock Synchronizer, recovers the timing information necessary for data reconstruction. The recovered bit stream is c...

Applications: In general, if tAOH is greater than the minimum required input hold time of the subsequent logic (synchronous or asynchronous), then the devices are guaranteed to function properly under worst-case environmental and supply voltage conditions, provided the clock signal source is the same. This ...

Features: The DE28C64-200A power assembly consists of input rectifiers, NTC thermistor, output inverter and connectors mounted on an Insulated Metal Substrate (IMS) substrate. The input side em- ploys surface mount 1600V rated SMD-220 rectifier diodes and the inverter section employs surface mount...

· D42280U-30

Vendor:NEC   Package Cooled:SOP   D/C:00+   

Description: The output modulation current is con- trolled by the pin VMOD and can be con- trolled in the range from 0 mA to 70 mA, however the specifications is only valid in the range from 5 mA to 70 mA. The out- put voltage swing across the external load may be varied accordingly. The modulation curr...

Applications: Copyright © 2003 SigmaTel, Inc. All rights reserved. All contents of this document are protected by copyright law and may not be reproduced without the express written consent of SigmaTel, Inc. SigmaTel, the SigmaTel logo, and combinations thereof are registered trademarks of SigmaTel, ...

Features: Experimental Results The operating characteristics of the pulsed LED oscillator circuit were compared to the DC circuit shown in Figure 10. The DC circuits current limiting resistor R5 was selected so the current through the LED was equal to the average (RMS) current of the oscillator ci...

· DS21552

Vendor:MAXIM   Package Cooled:QFP   D/C:07+   

Description: Conexant products are not intended for use in medical, life saving or life sustaining applications. Conexant customers using or selling Conexant products for use in such applications do so at their own risk and agree to fully indemnify Conexant for any damages resulting from such improper u...

Applications: Internet time servers use several standard timing protocols. The major three are Time Protocol, Daytime Protocol, and Network Time Protocol (NTP). The time servers are continually listening for timing requests sent using any of these protocols. When the server receives a request, it sends tim...

Features: The GDDS21552 combines three drivers and five receivers from TI™ trade-standard SN75188 and SN75189 bipolar quadruple drivers and receivers, respectively. The pinout matches the flow-through design of the SN75C185 to decrease the part count, reduce the board space required, and allow ...

· DSP2G05

Description: ‡ Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating conditions is not implied. E...

Applications: The DSP2G05 and DSP2G05A are high output current operational amplifiers designed to drive resistive, inductive and capacitive loads. Their complementary emitter follower output stage is the simple class C type and optimized for low frequency applications where crossover distortion is not...

Features: Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without ...

· DL3148-011

Vendor:SANYO   Package Cooled:CAN/3   D/C:02+   

Description: Word Program Operation The SST39VF160Q/VF160 are programmed on a word- by-word basis. The Program operation consists of three steps. The first step is the three-byte-load sequence for Software Data Protection. The second step is to load word address and word data. During the word Program...

Applications: Hewlett-Packards DL3148-011 family of zero bias Schottky detector diodes and the DL3148-011 family of DC biased detector diodes have been designed and optimized for use from 915 MHz to 5.8 GHz. They are ideal for RF/ID and RF Tag, cellular and other consumer applica- tions requiring sma...

Features: The DL3148-011ynix DL3148-011 Series are Dual In-line Memory Modules suitable for easy interchange and addition of 256Mbytes memory. The DL3148-011ynix DL3148-011 Series are fully synchronous operation referenced to the positive edge of the clock . All inputs and outputs are synchronized with...

· D48S1R530

Description: The LCX240 is an inverting octal buffer and line driver designed to be employed as a memory address driver, clock driver and bus oriented transmitter or receiver. The device is designed for low voltage (2.5V or 3.3V) VCC appli- cations with capability of interfacing to a 5V signal environ...

Applications: Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircrafts control systems, or other applications whose failure can be reasonably expected to resu...

Features: To maximize I/O throughput and improve host and SCSI bus utilization, the D48S1R530 incorporates a high-speed, proprietary RISC processor; an intelligent SCSI bus controller (SCSI executive processor [SXP]); and a host bus, dual-channel DMA controller. The SCSI bus controller and the ho...

· DAC02DDX

· DG201ACJ-DIP

· D80C42C-220

Vendor:NEC   Package Cooled:DIP   D/C:92   

· D7644PFA

· DM74LS373MM

· DS90CR286MTDX

Applications: TXD0B/SBO0B/P90 RXD0B/SBI0B/P91 SBT0B/P92 SDA3B/SBO3B/P93 SBI3B/P94 SCL3B/SBT3B/P95 IRQ2B/PD0 IRQ3B/PD1 TM4IOB/PD2 TM5IOB/PD3 TM7IOB/PD4 BUZZER/PD5 SYSCLK/PD6 VDD3 PD7 VSS3 AN0/PA0 AN1/PA1 AN2/PA2 AN3/PA3 AN4/PA4 AN5/PA5 AN6/PA6 AN7...

Features: Compatible with Ethernet II IEEE 802 3 10base5 and 10base2 (Cheapernet) 10 Mb s Manchester encoding decoding with receive clock recovery Patented digital phase locked loop (DPLL) decoder re- quires no precision external components Decodes Manchester data with up to g20 ns of jitter Loop...

· DTC123EM3T5G332

· DTC114GUA/K24

Description: Member of LAN9118 Family;optimized for medium- high performance applications Easily interfaces to most 16-bit embedded CPUs Efficient architecture with low CPU overhead Integrated PHY; supports external PHY via MII interface Supports audio & video streaming over Ethernet: 1-2 high-defin...

Applications: SPICE level output buffer models are available for engineers who want to simulate their specific interconnect schemes. In addition IV characteristics are in the process of being generated to support the other board level simulators in general use.

Features: I.2 - Read Operation The address of the first register to read is programmed in a write operation without data, and terminated by stop condition. Then another start is followed by the device address and R/W = 1 ; all successive bytes are now data read at successive positions starting from...

· DS1010S-300

Vendor:DALLAS   Package Cooled:SOP-16   D/C:07+   

Description: (For 5V Supply, Typical Unless Otherwise Noted) n Fixed inverting gain available−1,−2,−5,−10 n DC gain accuracy @2.7V supply LMV101/102/1052% (typ) LMV1106% (typ) n Space saving packagesSC70-5 & SOT23-5 n Industrial temperature range−40˚C to +8...

Applications: When the 5340 pixels are divided into blobks of 100, the maximum output of each block is set to VMAX, the minimum output to VMIN and the average output to VAVE. 4. Use below the minimum value of the saturation output voltage. 5. Saturation exposure is defined as follows.

Features: Low power consumption Continuous Variable Slope Delta (CVSD) modulation Sampling rate from 24Kbps to 128 Kbps Message digitization with the DS1010S-300-880 or the VW-1000A Pin to pin compatible with UM5100 40-pin DIP (DS1010S-300) or 48-pin QFP (DS1010S-300F)

· DF9-25P-1V(22)

Vendor:HRS   Package Cooled:L/T 1 DAY   D/C:2007+   

· D15S24B6RV09LF

Vendor:FCI   Package Cooled:08+   D/C:10000   

· DLW31SN601SQ2

· DM54795J

Vendor:NSC   Package Cooled:06+   D/C:800   

· DG445DYT1

Vendor:sil   Package Cooled:sil   D/C:dc0519   

Description: The electronic switches on the device operate in a make before break mode when the wiper changes tap positions. If the wiper is moved several positions, multiple taps are connected to the wiper for tIW (INC to VW change). The RTOTAL value for the device can tem- porarily be reduced by a...

Applications: When V CC falls below 1V, the MAX6806/MAX6808 RESET output no longer sinks currentit becomes an open circuit. Therefore, high-impedance CMOS logic inputs connected to RESET can drift to undetermined voltages. This presents no problem in most applica- tions, since most circuitry is inoperative...

Features: Four independent full-duplex asynchronous 16C950 high performance UART channels 128-byte deep FIFO per transmitter and receiver UARTs fully software compatible with industry standard 16C55x type UARTs Pin compatible with TL16C554 and ST16C654 Baud rates up to 15 Mbps in normal mode and ...

· DSS6NZ82A103Q91A

Description: M/A-COM offers six unique PIN diodes in five industry standard, low cost, surface mount plastic packages. Within this series, the PIN diodes offered, feature a variety of low resistance, low capacitance and long minority carrier lifetime characteristics.

Applications: Due to the high current and very high speed capability of the TURBOTRANSCEIVERs driver output stage, circuit board layout and bus grounding are critical factors that affect the system performance. Each of the TURBOTRANSCEIVERs bus ground pins should be connected to the nearest backplane ...

Features: In order to maintain the lowest output resistance and output ripple voltage, it is recommended that low ESR capacitors be used. Additionally, larger values of C1 and C2 will lower the output resistance and larger values of COUT1 and COUT2 will reduce output ripple. (See Equations 1a, 1b,...

· D4713AC

Description: Referenced to VCCA Voltage VCC Isolation Feature − If Either VCC Input Is at GND, Both Ports Are in the High-Impedance State Overvoltage-Tolerant Inputs/Outputs Allow Mixed-Voltage-Mode Data Communications Fully Configurable Dual-Rail Design Allows Each Port to Operate Over the Full 1...

Applications: Compliance with PCI Local Bus Specification rev 2.1 Compliance with ANSI draft T10/1365D SCSI Parallel InterfaceC4 (SPI-4) SCSI features set: Supports packetized SCSI protocol, and quick arbitration and select (QAS) Supports Ultra320 (Fast-160) SCSI. Backward compatible with Ultra160, ...

Features: Although the D4713AC can withstand differential voltages up to 25V, additional external protection is recommended. Since the D4713AC is a high speed amplifier, low leakage, low capaci- tance JFETs connected as diodes are recommended (e.g. 2N4416, Q1-Q4 in Figure 1). The differential inpu...

· D10LC20UTO-220

· DCNGK

· DC2-16PS

· DAC-08EBDAC-08EBDAC08EB

· DYD888

Vendor:EXAR   Package Cooled:DIP   D/C:05+   

Description: TAOperating free-air temperatureC55125C4085C NOTE 3: All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, literature number SCBA004.

Applications: (VCC = +2.7V to +5.5V, VGC = +3.0V, RXEN = TXEN = 0.6V, PADROUT pulled up to VCC with 50Ω resistor; IF, IF pulled up to VCC with 50Ω resistor, TXMXOUT pulled up to VCC with 125Ω resistor, LNAOUT pulled up to VCC with 100Ω resistor, all RF inputs open, TA = -40C to +85C....

Features: Data is written during a write or read-write cycle. Depending on the mode of operation, the falling edge of CAS or W strobes data into the on-chip data latch. In an early-write cycle, W is brought low prior to CAS and the data is strobed in by CAS with setup and hold times referenced to thi...

· D478631

· DM54S148J-MLS

Vendor:NSC   Package Cooled:06+   D/C:800   

· DM74ACTQ244SJX

Vendor:NS   Package Cooled:SOP   D/C:97   

Description: High output accuracy of 1% Output Adjustable from 1.24V to 26V Output Current of 1.25A Low Dropout Voltage Low quiescent current Extremely Tight Load & Line Regulation Reverse-battery and Load Dump Protection Zero Current Shutdown Mode (5-pin version) Offer in TO-263, TO-220, SOT-223, ...

Applications: When calculating synchronous frequencies, use tS1 if all inputs are on the input pins. tS2 should be used if data is applied at an I/O pin. If tS2 is greater than tCO1, 1/tS2 becomes the limiting frequency in the data-path mode unless 1/(tWH + tWL) is less than 1/tS2.

Features: Through the product term allocator, software automatically distributes product terms among the 16 macrocells in the logic block as needed. A total of 80 product terms are available from the local product term array. The product term allocator provides two important capabilities without af...

· DZ15232B

Vendor:ROHM   Package Cooled:.   D/C:2008+   

Description: (1) For more information on the PWP package, refer to TI technical brief, literature number SLMA002. (2) Test board conditions: 1. 3 x 3, 4 layers, thickness: 0.062 2. 1.5 oz. copper traces located on the top of the PCB 3. 1.5 oz. copper ground plane on the bottom of the PCB 4. 0.5 ...

Applications: HY5V56B(L)F is offering fully synchronous operation referenced to a positive edge of the clock. All inputs and outputs are synchronized with the rising edge of the clock input. The data paths are internally pipelined to achieve very high bandwidth. All input and output voltage levels are compa...

Features: Bay Linear products are not authorized for and should not be used within life support systems which are intended for surgical implants into the body to support or sustain life, in aircraft, space equipment, submarine, or nuclear facility applications without the specific written consent of ...

· DTA124XK\35

· DP83932CFV-25

Vendor:NSC   Package Cooled:QFP   D/C:04+   

· DVPPS01

· DS9636CACN

· DEL781200

· DS1000Z-412

Vendor:DALLAS   Package Cooled:SMD8   D/C:07+   

Description: This device is particularly well suited for portable elec- tronics (e.g. mobile handsets, PDAs, notebook comput- ers) because of its small package format and easy-to- use pin assignments. In particular, the CM1406 is ideal for EMI filtering and protecting data lines from ESD in wireless ...

Applications: Over-Temperature Protection Over-temperature protection is provided by an internal temperature sensor, which closely monitors the tempera- ture of the converters metal case. If the case temperature exceeds the specified limit (see applicable data sheet), the converter will shut down. The...

Features: Thermal Consideration Although the DS1000Z-412 offers some limiting circuitry for overload conditions, it is necessary not to exceed the maximum junction temperature, and therefore to be careful about thermal resistance. The heat flow will follow the lowest resistance path, which is the ...

· DF2238BTE13

· DLA001N

Description: Notes: 1. RJA is determined with the device mounted on a 1 in2 2 oz. copper pad on a 1.5 x 1.5 in. board of FR-4 material. The thermal resistance from the junction to the circuit board side of the solder ball, RJB, is defined for reference. For RJC, the thermal reference point for the ca...

Applications: The RST pin is normally driven high and will be clocked low when an overflow is detected from total clock divider (di- vide by 16,777,216) driven by the LFO. This allows the RST pin to reset an external device such as an MCU. This pulse will appear on the RST pin approximately every 52 m...

Features: Sequencing. Auto-Track simplifies the task of supply voltage sequencing in a power system by enabling modules to track each other, or any external voltage, during power up and power down. Other operating features include an on/off inhibit, margin up/down controls, and the ability to...

· DS1035Z-25/TR

Description: 3V TTL/CMOS-compatible Digital Output pins that provide the conversion results of the I and Q inputs. I0 and Q0 are the LSBs, I9 and Q9 are the MSBs. Valid data is present just after the rising edge of the CLK input in the Parallel mode. In the multiplex mode, I-channel data is valid on I...

Applications: Note: Some revisions of this device may incorporate deviations from published specifications known as errata. Multiple revisions of any device may be simultaneously available through various sales channels. For information about device errata, click here: http://www.maxim-ic.com/errata.

Features: The DS1035Z-25/TR is a highly integrated single-chip, dual-channel, bus master, Fibre Channel processor that targets storage, clustering, and networking applications. This chip connects a conventional PCI bus or PCI-X bus to a 2-Gb Fibre Channel loop or to a point-to-point Fibre Channe...

· D12079FN/86F0513

Vendor:NEC   Package Cooled:PLCC68   D/C:20007   

· D65650GD176

· DBL8013

· DS1035M-30

Description: 2.1 General. The documents listed in this section are specified in sections 3 and 4 of this specification. This section does not include documents cited in other sections of this specification or recommended for additional information or as examples. While every effort has been made to ens...

Applications: NOTES: 1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specificat...

Features: The Motorola MPC555EVB/ETAS ES200 evaluation board was designed with multiple interfaces to al- low flexibility for expansion. There are three sets of connectors for expansion. The MAPI-400+100 is on the bottom side of the board and has access to all signals required to interface to a user ...

· DA5731

Vendor:PHILIPS   Package Cooled:N/A   D/C:06+   

Description: Controller (host) will send start bit. Controller (host) sends the read address D3 (H) ICS clock will acknowledge ICS clock will send the byte count Controller (host) acknowledges ICS clock sends Byte 0 through byte 8 (default) ICS clock sends Byte 0 through byte X (if X(H) was ...

Applications: The DA5731 dual RF detector is designed for RF transmit power measurement in mobile phones. This dual mean square IC is especially suited for accurate power measure- ment of RF signals exhibiting high peak-to-average ratios used in 3G and UMTS/CDMA applications. The DA5731 saves calibrat...

Features: 16-Pin Plastic HVQFNC40 C to +85 CDA5731BS9500 Standard packing quantities and other packaging data are available at www.standardproducts.philips.com/packaging. SMBus as specified by the Smart Battery System Implementers Forum is a derivative of the Philips I2C patent. I2C is a trademark o...

· DM74ALS38AMX

Description: Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage...

Applications: 1. Test conditions: T = 25º C, Supply Voltage = +6 V, Device Voltage = 5.0 V, Rbias = 14 , Icc = 70 mA typical, 50 System. 2. 3OIP measured with two tones at an output power of +4 dBm/tone separated by 1 MHz. The suppression on the largest IM3 product is used to calculate the 3OIP using ...

Features: These characteristics are typical values measured for a limited sample size. They are not guaranteed by production test. They are only given as a design guide to assist during the design-in phase of DM74ALS38AMX. ParameterSymbolValueUnitsCondition

· DJLXT385LC

Vendor:INTEL   Package Cooled:N/A   D/C:2006+   

· DCS0502S-10138

· DL16107KAK11AQC-3V

Description: 2) Verify that a shunt is installed on jumper JU3 (SYNC). 3) Connect a +2.7VDC to +5.5VDC power supply to the VIN pad. Set the power supply to more than +3.6V. Connect the supply ground to the PGND pad. 4) Connect a voltmeter to the VOUT pad. 5) Connect an external voltage reference or DA...

Applications: At time T4, the system has transitioned into S0 state and the ATX supplies have begun to ramp up. With the DL16107KAK11AQC-3V/B (Figure 3), the 5VDUAL rail will begin to ramp up from the 5VATX rail through the body diode of the N-MOSFET (Q3). The DL16107KAK11AQC-3VA will already have the 5VDU...

Features: DL16107KAK11AQC-3V is integrated Circuit f or LCD Display Monitor.It is controlled IIC BUS and Band Wide is 180MHz. It includes OSD Blanking ,OSD Mixing,Wide Band Amplif ier,Main/Sub Contrast Main/Sub Brightness ,and 2 Input routes. Vcc Voltage is 5V and Flat package is used. then it is the...

· DS1213M-20

Vendor:DALLAS   Package Cooled:DIP8   D/C:00+   

· D9622L

Vendor:NEC   Package Cooled:PLCC   D/C:00+   

Description: In encoding mode, audio data is input via the inte- grated A/D converter, serial PCM, or S/PDIF interface. The compressed digital data stream is sent via the par- allel interface. In decoding mode, compressed digital data streams are accepted in the parallel or serial for- mat. The audio...

Applications: The D9622L is designed to operate in a manner very similar to other 2-wire interface memory products. The major differences result from the higher performance write capability of FRAM technology. These improvements result in some differences between the D9622L and a similar configurati...

Features: Ci is required when regulator is located at an appreciable distance from the power supply filter. Co improves transient response by reducing AC noise which is present at the output. Since I ADJ is controlled to less than 100µA, the error associated with this term is negligible in most ...

· DM54LS04W/883C

Description: The AVPro5002C device is an audio/video switching IC that supports an input/output port, an input only port, and an output only port. The device includes multiplexers that allow the inputs to be routed to the outputs in various configurations. Additional outputs are provided to drive an exter...

Applications: Single-chip CardBus host adapter Supports 2 PCMCIA 1.0 and JEIDA 4.2 R2 cards or 2 CardBus cards ACPI-PCI Bus Power Management Interface Specification Rev1.0 Compliant Supports OnNow LAN wakeup, OnNow Ring Indicate, PCI CLKRUN#, PME#, and CardBus CCLKRUN# Compliant with PCI specifica...

Features: The DM54LS04W/883C uses Dallas exclusive 1-wire bus protocol that implements bus communication using one control signal. The control line requires a weak pullup resistor since all devices are linked to the bus via a 3-state or open-drain port (the DQ pin in the case of the DM54LS04W/883C). In...

· DM54LS240J/883QS

Applications: Note 3: Typical values are determined with TA = TJ = 25˚C and represent the most likely norm. Note 4: All limits are guaranteed at room temperature (standard type face) and at temperature extremes (bold type face). All room temperature limits are 100% tested during production with TA = ...

· DF1OOAA160

Description: An analog multiplexer allows the selection be- tween two input ports which can be used to select an attenuated(0, 10dB for ex.) version of the sig- nal in case of short loop or large echo. The sig- nal is amplified by a low noise gain stage (0- 31dB) then low-pass filtered to avoid anti...

Applications: The DF1OOAA160 is a monolithic 10-bit analog-to-digital converter, designed for digi- tizing wide bandwidth analog signals at very high sampling rates of up to 2 Gsps. It uses an innovative architecture, including an on-chip Sample and Hold (S/H). The 3.3 GHz full power input bandwidth and ...

Features: Free E86 family information such as data books, users man ual s , data sh eets , ap pl ic ati on n otes , th e FusionE86 Partner Solutions Catalog, and other litera- ture is available with a simple phone call. Internation- ally, contact your local AMD sales office for complete E86 family...

· D78058FGC-A19-8BT

Description: The D78058FGC-A19-8BT is a dual, Low-Noise Preamplifier (LNP), plus low-noise Variable Gain Amplifier (VGA). The combination of Active Termination (AT) and Maximum Gain Select (MGS) allow for the best noise performance. The D78058FGC-A19-8BT also features low crosstalk and outstanding dis...

Applications: Up to 40 pins of the 80-pin QFP package can be dedicated to I/O. Six vectored interrupts provide fast response to internal and external events. In addition, the S3C72N8/C72N5's advanced CMOS technology provides for low power consumption and a wide operating voltage range.

Features: Stanford Microdevices D78058FGC-A19-8BT is a high performance Gallium Arsenide Hetrojunction Bipolar Transistor MMIC Amplifier. A Darlington configuration is utilized for broadband perfor- mance up to 3 GHz. The heterojunction increases break- down voltage and minimizes leakage current be...

· DS78C120DWF

· D25S81C6GX00LF

Vendor:FCI   Package Cooled:08+   D/C:10000   

· D82C284-8/10/12

· DS3695ATMX

Vendor:NS   Package Cooled:SOP8   D/C:NS   

Description: 12-Bit Dual Transmit DAC 200 MSPS Update Rate Single Supply: 3.0 V - 3.6 V High SFDR: 85 dBc at 5 MHz High IMD3: 78 dBc at 15.1 and 16.1 MHz WCDMA ACLR: 70 dB at 30.72 MHz Independent or Single Resistor Gain Control Dual or Interleaved Data On-Chip 1.2-V Reference Low Power: 330 mW Power...

Applications: The DS3695ATMX is a PLL based, zero-delay buffer, with the ability to distribute nine outputs of up to 133MHz at 3.3V. All the outputs are distributed from a single clock input CLKIN and output OUT0 performs zero delay by connecting a feedback to PLL.

Features: CAUTION ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on the human body and test equipment and can discharge without detection. Although the AD8152 features proprietary ESD protection circuitry, permanent damage may occur on device...

· DL4758

· DAM427-1B/-1A

Vendor:HAR/INT/DMA   Package Cooled:CDIP8   D/C:N/A   

· DSE12X31-10B

Description: Notes: 1. Within-Device skew is defined for identical transitions on similar paths through a device. 2. Setup, Hold, and Disable times are all relative to a falling edge on CLK or SCLK. 3. Minimum input swing for which AC parameters are guaranteed. Full DC LVDS output swings will be generate...

Applications: The device will support SVHS mode for three encoder interface formats. The first encoder interface format accepts chroma signals on the Enc_C pin and luma signals on the Enc_Y pin. This is designated "SVHS, Enc 1" mode. The second format will receive chroma information on the Enc_B...

Features: The DSE12X31-10B integrates six deserializer devices into a single chip. The DSE12X31-10B can simultaneously deserial- ize up to six data streams that have been serialized by the National Semiconductor SCAN921023 Bus LVDS serializer. The device also includes a seventh serial input channel...

· D78053GC-503

Description: Gate-to-Source Voltage C Continue - Non-repetitive Total Power Dissipation Derate Above 25 Operating and Storage Temperature Range Single Pulse Drain-to-Source Avalanche Energy C TJ = 25 (VDD = 100V, VGS= 10V, IL =6A, L = 10mH, RG=25) Thermal Resistance C Junction to Case - Junction t...

Applications: A logic input control to enable the regulator output. When EN is asserted (logic high), it allows out- put regulation to commence. When EN is deasserted (logic low), the regulator pass transistor (N- channel MOSFET) is forced into a high impedance mode. All other internal circuitry is una...

Features: The Hynix D78053GC-503 Series are Dual In-line Memory Modules suitable for easy interchange and addition of 256Mbytes memory. The Hynix D78053GC-503 Series are fully synchronous operation referenced to the positive edge of the clock . All inputs and outputs are synchronized with the rising ed...

· DT142N16KOF

Description: The ATR4258 is a highly integrated AM/FM front-end circuit manufactured using Atmels advanced BICMOS technology. It represents a complete, automatically adjust- able AM/FM front end, containing a double-conversion system for FM and an up/down-conversion receiver for AM with IF1 = 10.7 MHz a...

Applications: Important Notice: Texas Instruments (TI) reserves the right to make changes to or discontinue any product or service identified in this publication without notice. TI advises its customers to obtain the latest version of the relevant information to verify, before placing any orders, that the i...

Features: The LTC®3831 is a high power, high efficiency switching regulator controller designed for DDR memory termina- tion. The DT142N16KOF generates an output voltage equal to 1/2 of an external supply or reference voltage. The DT142N16KOF uses a synchronous switching architecture with N-chan- n...

· DS26C32APM

Vendor:NS   Package Cooled:800   D/C:97   

Description: Note: Stresses greater than those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only and func- tional operation of the device at these or any other conditions outside those indicated in the operational sections of this spec ification ...

Applications: Places the 1-bit bypass register between the TDI and TDO pins, which allows the boundary scan test data to pass synchronously through selected devices to adjacent devices during normal device operation, while holding I/O pins to a state defined by the data in the boundary-scan register.

Features: The DS26C32APM features adjustable switching frequency, adjustable soft start, and a separate output VON enable control to allow selection of supply start-up sequence. An over-temperature feature is provided to allow the IC to be automatically protected from excessive power dissipation.

· DH0026G/883

Vendor:NS   Package Cooled:CAN   D/C:07+   

Description: PARAMETER Reference Voltage Section Fb Voltage Fb Voltage Line Regulation UVLO Section UVLO Threshold - Vcc UVLO Hysteresis - Vcc UVLO Threshold - VccLDO UVLO Hysteresis - VccLDO UVLO Threshold - VcH1 UVLO Hysteresis - VcH1 UVLO Threshold - VcH2 UVLO Hysteresis - VcH2 UVLO Threshold -...

Applications: FEATURES D Data Rate: 1.25MSPS D Signal-to-Noise Ratio: 93dB D Total Harmonic Distortion: −101dB D Spurious-Free Dynamic Range: 103dB D Linear Phase with 615kHz Bandwidth D Passband Ripple: 0.0025dB D Adjustable FIFO Output Buffer (ADS1626 only) D Selectable On-Chip Reference D Dire...

Features: VCCL, VCCR, VLC0L, VLC0R, VLC1L, VLC1R, VLC4L, VLC4R, VLC5L and VLC5R Referenced to VSS, HVSSL and HVSSR Applies to all data bus and I / O pins. Ensure that the following condition is always maintained. VCCL / R VLC0L / R VLC1L / R VLC4L / R VLC5L / R HVSSL / R

· DS1801

Applications: RST is a device reset pin. When RST is pulsed high while CS is low the DS1801 will output 32 bits of fixed data which conforms to the standard for synchronous response to reset. CS must remain LOW and the part must not be in a write cycle for the response to reset to occur. See Fi...

Features: The LPS input is considered inactive if it remains low for more than the LPS_RESET time (see the LPS terminal definition) and is considered active otherwise. When the DS1801 detects that the LPS input is inactive, the PHY-LLC interface is placed into a low-power reset state in which the CTL...

· DTB123EKA

Vendor:ROHM   Package Cooled:08+   D/C:SOT-23   

· DG1B24BWD

· DTA124GKA/K15

Description: Note 2: When the input voltage (VI) at any pin exceeds the power supplies (VI < GND or VI > +VS) the current at that pin should be limited to 5 mA. The 20 mA maximum package input current rating limits the number of pins that can safely exceedthe power supplies with an input current of ...

Applications: Automatic Speech Recognition (ASR) consists of Speaker Independent (SI) North American English isolated word recognition for a predefined 69 word vocabulary list, Speaker Dependent (SD) isolated word training, and SD isolated word recognition functions.

Features: © 1998 MX•COM Inc.www.mxcom.com Tele: 800 638-5577 336 744-5050 Fax: 336 744-5054Doc. # 20480136.004 4800 Bethania Station Road, Winston-Salem, NC 27105-1201 USAAll trademarks and service marks are held by their respective companies.

· DG508J

Vendor:LINEAR   Package Cooled:NULL   D/C:04+   

Description: 1. Permanent device damage may occur if absolute maximum ratings are exceeded. This is a stress rating only and functional operation is not implied at conditions other than those detailed in the operational sections of this data sheet. Exposure to absolute maximum ratlng conditions for exten...

Applications: SIGNAL DESCRIPTIONS See Figure 1, Logic Diagram, and Table 1, Signal Names, for a brief overview of the signals connect- ed to this device. Address Inputs (A0-A17). The Address Inputs select the cells in the memory array to access dur- ing Bus Read operations. During Bus Write opera- t...

Features: !Features 1) Convex electrodes Easy to check the fillet after soldering is finished. 2) Compatible with a wide range of mounting equipment. Squared corners make it excellent for mounting using image recognition devices. 3) High-density mounting Can be mounted even more densely than two...

· DM74AC163

Vendor:FAIRCHILD   Package Cooled:SOP16   D/C:99/00   

Description: Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating conditions is not implied. Exposur...

Applications: Low power and small size makes the DM74AC163 ideal for automatic test equipment, DAC-per-pin program- mers, data acquisition systems, and closed-loop servo- control. The device is available in SO-16 and SSOP-20 packages and is guaranteed over the C40C to +85C temperature range.

Features: The DM74AC163 works in a fully differential mode from analog inputs to digital outputs. A dif- ferential Data Ready output (DR/DRB) is available to indicate when the outputs are valid and an Asynchronous Data Ready Reset ensures that the first digitized data corresponds to the first acquisi...

· DSEP8-06B

Description: Feedback Reference Voltage Switching Frequency Maximum Duty LX ON Resistance Current Limit Setting EXT ON Resistance to VDD EXT ON Resistance to GND Line Regulation Load Regulation CE Pin Trip Level Temperature Stability for Vout Thermal Shutdown Thermal Shutdown Hysterises

Applications: • True single-chip tuner • Single 3.3V supply voltage • Fully integrated oscillator • Fully integrated channel selectivity • Symmetrical IF output for direct connection to channel decoder • RSSI (Received Strength Signal Indicator) information pro...

Features: This is a Class B product based on the standard of the Voluntary Control Council for Interference from Information Technology Equipment (VCCI). If this is used near a radio or television receiver in a domestic environment, it may cause radio interference. Install and use the equipment accor...

· DR36531A11ZL

Vendor:PSPG   Package Cooled:LQFP100   D/C:2003   

Pages: 22/755  At 10 21 22 23 24 25 26 27 28 29 30 Under 10

Quick Search Part No.

Home About Us Map Online Inquiry
© 2009-2011 ExchangeIC.com Corp.All Rights Reserved