Current position: Home > Products > Index H > Page 11
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9 All

Records matching criteria: 88300

Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 320 247 52 401 237 81 316 492 200 194 860 628 207 586 800 160 728 141 784 854 411 209 166 62 373 322 709 197 615 715 649 847 269 634 658 819 103 515

· HC139

Description: The following table lists the conditions that cause the fault lamp driver to function. To prevent lamp flicker, spe- cific faults are required to be present for TDELAY seconds before the lamp driver is activated. This delay is indicated in the table.

Applications: The HC139 supports secondary cache in systems utilizing either a linear or interleaved burst sequence. The linear burst sequence is suited for processors that utilize a linear burst sequence. The burst order is user selectable, and is determined by sampling the MODE input. Accesses can be ini...

Features: The HC139 transistor is designed for low cost amplifier and oscillator applications. Low noise figure, high gain and high current capability equate to wide dynamic range and excellent linearity. NEC's new low profile/flat lead style "M13" package is ideal for today's portable wi...

· HA3-1205-5

Description: Specifications at TA +25C are guaranteed by production testing. Specifications at TA < +25C are guaranteed by design. Nominal full-scale current IOUTFS = 32 x IREF. This parameter does not include update-rate depending effects of sin(x)/x filtering inherent in the MAX5878. Parameter measur...

Applications: 21098765432121098765432109876543210987654321210987654321098765432109876543212109876543210987654321098765432121098765432109876543210987654321 21098765432121098765432109876543210987654321210987654321098765432109876543212109876543210987654321098765432121098765432109876543210987654321

Features: The Hyundai HA3-1205-5 Series are Dual In-line Memory Modules suitable for easy interchange and addition of 128Mbytes memory. The Hyundai HA3-1205-5 HYM72V16M636LT6 Series are fully synchronous operation referenced to the positive edge of the clock . All inputs and outputs are synchronized wi...

· HMT125S6AFP8CG7N0

· HLMA-QH00-T0011

Vendor:.   Package Cooled:.   D/C:07+   

Description: TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information pub...

Applications: Notes: 1. Typical specifications are not guaranteed 2. Offset and sensitivity are essentially ratiometric to supply voltage 3. Guaranteed by wafer level test and measurement of initial offset and sensitivity 4. Guaranteed by design through measurements done up to 1g 5. Contribution to ...

Features: The Auto Product Identification mode allows the reading out of a binary code from an EPROM that will identify its manufacturer and the type. This mode is intended for programming to automatically match the device to be programmed with its corresponding programming algo- rithm. This mode is fu...

· HD9405TDB

Description: The AMC5902 contains a direct PWM control system for spindle and two slide channels drive thus that the total power consumption can be reduced. Besides, voltage supplies for spindle, slide, focus/tracking and loading can be set separately.

Applications: Specified by design. Not production tested. Sample tested during the initial release and after any redesign or process changes that may affect this parameter. OUTPUT of pin VOUT changes to new level immediately (within settling time) after DAC register is loaded.

Features: A set of eight configuration registers are provided to control various functions of the PC87334 These registers are ac- cessed using two 8-bit wide index and data registers The ISA I O address of the register pair can be relocated using a power-up strapping option

· H16C15

· HCF4011M

Vendor:30500   Package Cooled:ST   D/C:07+   

Description: Note 9: For best accuracy, minimize output loading. Higher sink currents can affect sensor accuracy with internal heating. This can cause an error of 0.64˚C at full rated sink current and saturation voltage based on junction-to-ambient thermal resistance.

Applications: Efficiency up to 81% 3000VDC Isolation MTBF > 2,000,000 Hours Low Cost Input 5, 12 and 24VDC Output 5, 12, 15, {5, {12 and {15VDC Temperature Performance -40] to +85] Lead Frame Technology UL 94V-0 Package Material Internal SMD Construction

Features: The reset logic compares the output voltage VQ to an internal threshold. If the output voltage drops below this level, the external reset delay capacitor CD is discharged. When VD is lower than VLD, the reset output RO is switched Low. If the output voltage drop is very short, the VLD lev...

· HMT-65162C-9800

· HD74S158P

Description: The HT24LC16 has a write protect pin that provides hardware data protection. The write protect pin allows normal read/write operations when the connection is grounded. When the write protect pin is connected to VCC, the write protection feature is enabled and oper- ates as shown in the follo...

Applications: FEATURES D Replaces OR-ing Diodes D Operating Supply Range of −12 V to −80 V D Withstands Transients to C100 V D Programmable Current Limit D Programmable Linear Inrush Slew Rate D Programmable UV/OV Thresholds D Programmable UV and OV Hysteresis D Fault Timer to Eliminat...

Features: are fully compatible with PECL 10 K and 10 KH logic families. The outputs provide sufficient drive current to directly drive transmission lines terminated in 50 Ω to VDD − 2 V. A latch input, which is included, permits tracking, track-and-hold, or sample-and-hold modes of op...

· HIN240IN

Description: The CD4049UBT is an Inverting Hex Buffer and features logic level conversion using only one supply (voltage (VCC). The input signal high level (VIH) can exceed the VCC supply voltage when this device is used for logic level conversions. This device is intended for use as CMOS to DTL/TTL ...

Applications: The K3P7V(U)1000B-YC is a fully static mask programmable ROM fabricated using silicon gate CMOS process technology, and is organized either as 8,388,608 x 8 bit(byte mode) or as 4,194,304 x 16 bit(word mode) depending on BHE voltage level.(See mode selection table) This device includes page r...

Features: The host can program both the temperature alarm threshold (TOS) and the temperature at which the alarm condition goes away (THYST). In addition, the host can read back the contents of the HIN240INs TOS and THYST registers. The sensor powers up in Com- parator mode with default thresholds of...

· HN62338BFC24

Vendor:HIT   Package Cooled:SOP32W   D/C:2007+   

· HGTP7N60C3D_NL

· HDSP-701G

Vendor:Agilent   Package Cooled:DIP   D/C:03+   

Description: The C-suffix devices are characterized for operation from 0C to 70C. The I-suffix devices are characterized for operation from −40C to 85C. The M-suffix devices are characterized for operation over the full military temperature range of −55C to 125C.

Applications: the fourth WE# or CE#, whichever occurs first. The Program operation, once initiated, will be completed within 20 µs. See Figures 2 and 3 for WE# and CE# controlled Program operation timing diagrams respectively and Figure 15 for flowchart.

Features: The HDSP-701G reduces motor noise by imparting a slope to the output current when switching the phase to which power is applied. This motor driver includes an automatic recovery constraint protection circuit and is optimal for driving 24 V fan motors.

· HI7170IB

Vendor:INTERSIL   Package Cooled:04+   D/C:80   

Description: Information in this document is provided in connection with Intel® products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Intels Terms and Conditions of Sale for such products, Intel assume...

Applications: Master mode and snapshot mode output signal. Active HIGH during readout. The two-wire serial interface register setting switches this pin between input and output. Master mode and snapshot mode output signal. Active HIGH when image data are on data output bus. The two-wire serial interface...

Features: This series of planar, P on N, large area silicon photodiodes is characterized for use in the photovoltaic (unbiased) mode. Their excellent speed and broadband sensitivity makes them ideal for detecting light from a variety of sources such as LEDs, IREDs, flashtubes, incandescent lamps, lase...

· HKW0627-01-011

Vendor:HOSIDEN   Package Cooled:N/A   D/C:05+   

· HEF74HCT14

· HY5RS123235FP-14

Description: The 3-state serial data output for the A/D conversion result. SDO is kept in the high-impedance state when CS is high and presents output data after the CS falling edge until the LSB is presented. The output format is MSB first. The remaining data bits are presented on the rising edge of SC...

Applications: Note b: ICC and ICC are dependent on output loading and cycle rate. The specified values are obtained with outputs unloaded.13 Note c: Bringing E VIH will not produce standby current levels until any nonvolatile cycle in progress has timed out. See MODE SELECTION table. Note d: VCC refere...

Features: Fault protection is provided by an output overvoltage comparator and optional short-circuit shutdown timer. Soft-start capability for supply sequencing is accom- plished using an external timing capacitor. The regulator current limit level is symmetrical and user programmable. Wide supply ran...

· HCPL2413AGILENT07+

· HIC6061

Description: Description These chip-type LEDs utilize Alu- minum Indium Gallium Phosphide (AlInGaP) material technology. The AlInGaP material has a very high luminous efficiency, capable of producing high light output over a wide range of drive currents. The available colors in this surface m...

Applications: The Hynix HIC6061 Series are 32Mx64bits Synchronous DRAM Modules. The modules are composed of sixteen 16Mx8bits CMOS Synchronous DRAMs in 400mil 54pin TSOP-II package, one 2Kbit EEPROM in 8pin TSSOP package on a 168pin glass-epoxy printed circuit board. One 0.0022uF decoupling capacitors per ...

Features: True Dual-Ported memory cells which allow simultaneous access of the same memory location High-speed access C Commercial: 15/20ns (max.) C Industrial: 20ns (max.) Low-power operation C HIC6061 Active: 440mW (typ.) Standby: 660µW (typ.) Dual chip enables allow for depth expansio...

· HD10016424

· HF-B0570

Vendor:.   Package Cooled:.   D/C:07+   

· HBDR1130

· HM1203

· HY638256T1-20

Description: Absolute maximum ratings indicate sustained limits beyond which damage to the device may occur. All voltage pa- rameters are referenced to Vcc lead. (Tj = 25o C unless otherwise specified). PCB mounting uses the standard footprint with 70µm copper thickness

Applications: Digital Pixel Inputs These pins accept digital pixel data streams with either 8, 12, or 16-bit multiplexed or 16-bit non-multiplexed formats, determined by the input mode setting (see Registers and Programming section). Inputs D0 - D7 are used when operating in 8-bit multiplexed mode. Inputs ...

Features: The TMS27PC210A OTP PROM is offered in a 44-pin plastic leaded chip carrier package using 1,25-mm (50-mil) lead spacing ( FN suffix). The TMS27PC210A is offered with two choices of temperature ranges, 0C to 70C ( FNL suffix) and C40C to 85C ( FNE suffix). See Table 1.

· HY5PS121621CFP-C4-C

Vendor:Hynix   Package Cooled:08+   D/C:10000   

· HX0021B

Vendor:HX   Package Cooled:N/A   D/C:9+   

· HJK-212H

· HCPL-2630-500E

Vendor:AVAGO   Package Cooled:AGL   D/C:07+/08+   

Description: The LTC®3717 is a synchronous step-down switching regulator controller for double data rate (DDR) and Quad Data RateTM (QDRTM) memory termination. The controller uses a valley current control architecture to deliver very low duty cycles without requiring a sense resistor. Oper- ating freq...

Applications: The CY7C147 is a high performance CMOS static RAMs organized as 4096 words by 1 bit. Easy memory expansion is provided by an active LOW chip enable (CE) and three state drivers. The CY7C147 has an automatic power down feature, reducing the power consumption by 80% when deselected . Writing...

Features: The HCPL-2630-500EA is one in a series of Bus LVDS trans- ceivers designed specifically for the high speed, low power proprietary backplane or cable interfaces. The device oper- ates from a single 3.3V power supply and includes nine differential line drivers and nine receivers. To minimiz...

· HCPL2630500E

Description: There are two alternatives to set the boot block. The 8K-byte in the top/bottom location of this device can be locked as boot block, which can be used to store boot codes. It is located in the last 8K bytes or first 8K bytes of the memory with the address range from E000(hex) to FFFF(hex) for...

Applications: The output signals of the SDA 9188-3X are analog. Either RGB or Y, U, V signals can be output, whereby a 6-bit broadband conversion is obtained for all components. Clamping for RGB output signal is performed in an RGB processor (e.g. TDA 4685).

Features: The HCPL2630500E is activated by ENABLE = H. PA_ENABLE must remain L for t 1 ms, then the CLK signal can be taken to clock the microcontroller and the power amplifier is switched on with PA_ENABLE = H. The chip is then ready for FSK modulation. The microcontroller starts to switch on and of...

· HCPL2630-500E

Vendor:3950   Package Cooled:AGL   D/C:07+/08+   

Description: If you are at all familiar with RF devices you may be concerned about specialized layout requirements. Hi-gain high-frequency amplifiers are notorious for layout challenges. Thankfully, the BBA series is inherently very stable. By adhering to a few simple design and layout rules you will en...

Applications: A set of eight configuration registers are provided to control various functions of the PC87334 These registers are ac- cessed using two 8-bit wide index and data registers The ISA I O address of the register pair can be relocated using a power-up strapping option

Features: NOTES: (1) Calibration can minimize these errors. (2) The gain calibration cannot have a REF IN+ of more than AVDD C 1.5V with buffer ON. To calibrate gain, turn buffer off. (3) ∆VOUT is change in digital result. (4) 9pF switched capacitor at fSAMP clock frequency (see Figure 6). (5) ...

· HAL506

· HDL3E513-00E

Vendor:HIT   Package Cooled:PGA   D/C:06+   

Description: Near-zero propagation delay 5Ω switches connect inputs to outputs Direct bus connection when switches are ON Ultra-low quiescent power (0.1µA typical) C Ideally suited for notebook applications • Packages available: C 24-pin 173-mil wide plastic TSSOP (L) C 24-pin ...

Applications: • A newly-developed X-ray generator is used, providing extremely accurate measurement results with a quick response time. The TOSGAGE-HDL3E513-00E focuses X-ray beams finely in the strip width direction to improve thickness resolution in the strip width direction, and making it ...

Features: The HDL3E513-00EA has two types of power connections in addi- tion to the LI pin. They are the Logic VCC (VCC) and the Quiet VCC (QVCC). There are two logic VCC pins on the HDL3E513-00E that provide the supply voltage for the logic and control cir- cuitry. Multiple power pins reduce the ...

· HD974001DS

Vendor:SG   Package Cooled:DIP   D/C:04+   

Description: (2) Storage The BG-LEDs should be stored at 30C or less and 70%RH or less after being shipped from Nichia and the storage life limits are 3 months.If the BG-LEDs are stored for 3 months or more, they can be stored for a year in a sealed container with a nitrogen atmosphere and moisture ab...

Applications: ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to damage because very small parametric changes could cause the device not to meet published specifications.

Features: For best performance, controlled impedance transmission line techniques, such as microstrip, should be used. Mount all com- ponents as close to the required pins as possible. It is strongly recommended that the HD974001DS not be socket-mounted.

· HD-974001-DS

Description: The CY7C964 circuitry is designed to be of use to designers of VMEbus circuitry, including VSB (VME subsystem bus) and designs not requiring the features of the Cypress VIC068A, VIC64, CY7C960, and CY7C961. The logic diagram includes general-purpose blocks of comparators, counters, and la...

Applications: Loss of Lock indicator output. Asserted when internal PLL is not tracking the input reference for frequency and phase. 3 Logic 1 indicates loss of lock. Logic 0 indicates locked condition. Narrow Bandwidth enable. LVCMOS/LVTTL: Logic 1 - Narrow loop bandwidth, RIN = 2100kΩ. Logic 0...

· HH54PW-T3EL-DC110V

Vendor:NAIS   Package Cooled:DIP   D/C:1999   

· HD63B03XFB

Vendor:HITACHI   Package Cooled:QFP   D/C:97+   

Description: The information provided herein is believed to be reliable at press time. Stanford Microdevices assumes no responsibility for inaccuracies or omissions. Stanford Microdevices assumes no responsibility for the use of this information, and all such information shall be entirely at the users own...

Applications: breakdown greater than 7.0 V, low Ron, and excellent high frequency response. The NLAS4599 sets a new standard in space efficiency. It occupies 4. mm2 and provides the same functionality as oneCthird of a 4053. Compared to the 4053, the NLAS4599 is 2.5 times more space efficient. This is ...

Features: The Simtek HD63B03XFB combines a 256 Kbit nonvolatile static RAM with a full-featured real-time clock in a reliable, monolithic integrated circuit. The embeddednonvolatileelementsincorporate Simteks QuantumTrap™ technology producing the worlds most reliable nonvolatile memory. The SRA...

· HC2-HL-DC36V

· H038

· HLMP-EJ26-RU000

Vendor:.   Package Cooled:.   D/C:07+   

Description: The HET is an advanced intelligent timer that provides sophisticated timing functions for real-time applications. The timer is software-controlled, using a reduced instruction set, with a specialized timer micromachine and an attached I/O port. The HET can be used for compare, capture, or g...

Applications: This is the only external power supply required for the HLMP-EJ26-RU000DY, and must be the same supply used to power the half-bridge it is driving. The HLMP-EJ26-RU000DY powers its low-voltage logic, low-side gate driver, and bootstrap/charge pump circuits from self-contained voltage regu...

Features: HLMP-EJ26-RU000 is a precision three-port isolated buffer ampli- fier incorporating a novel duty cycle modulation- demodulation technique and has excellent accuracy. The input is protected to withstand 100V without damage. The signal is transmitted digitally across a differential capacit...

· HCPL-0721500

Vendor:Agilent   Package Cooled:AGILENT   D/C:01+   

Description: This document is a general product description and is subject to change without notice. Hyundai electronics does not assume any responsibility for use of circuits described. No patent licences are implied Hyundai Semiconductor Rev.10/Sep.98

Applications: Note) *1: Except for the operating ambient temperature and storage temperature, all ratings are for Ta = 25C. *2: When used within the range not exceeding the absolute maximum ratings and the power dissipation. *3: The power dissipation shown is for the independent IC without a heat sink at...

Features: The Serial Command mode allows access to the HCPL-0721500 control and status registers via a serial control port. In this mode the A0, A1, and A2 lines provide register addresses for data passed through the DATA pin under control of the RD and WR lines. A read operation is initiated when the...

· HCD667B73RBP

Description: Carrier Detect (Active-LOW). These inputs are associated with individual UART channels A and B. A logic LOW on these pins indicates that a carrier has been detected by the modem for that channel. The state of these inputs is reflected in the modem status register (MSR).

Applications: This device is fully specified for hot-insertion applications using Ioff and power-up 3-state. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down. The power-up 3-state circuitry places the outputs in the high-impedance st...

Features: These three terminal positive regulators are supplied in a hermetically sealed metal package whose outline is similar to the industry standard TO-220 plastic package. All protective features are designed into the circuit, including thermal shutdown, current limiting and safe-area control. W...

· H41T01

Description: DESCRIPTION The HCC40160B, 40161B, 40162B, 40163B (ex- tended temperature range) and HCF40160B, 40161B, 40162B, 40163B (intermediate tempera- ture range) are monolithic integrated circuits, avail- able in 16-lead dual in line plastic or ceramic package and plastic micropackage. HCC/HCF4...

Applications: The H41T01 device provides an integrated power management solution for the add- on multimedia features in new-generation mobile phones. These features include a camera module, sound system for polyphonic ringing tones, memory module for downloaded MP3 files, Bluetooth module for cordless he...

Features: The internal time delay is generated by an up/down counter. The clock for the counter is disabled if the voltage at the supply pin VB < 5.76 V. In this case, the internal signal VBOK will be set to low and the output NOTL is directly switched to low.

· HPFC-5000REV2.

Vendor:HPFC   Package Cooled:QFP   D/C:07+   

Description: Note 1: Absolute Maximum Ratings are those values beyond which the life of a device may be impaired. Note 2: Sync amplitude = 5VP-P, pulse width = 50ns. Verify output (A-F) frequency = 1/2 sync frequency. Note 3: Includes leading edge blanking delay, RLEB = 20k. Note 4: FB is driven by a ser...

Applications: The various modes on the 4TPHY can be configured and controlled via the MII management interface. This manage- ment interface makes inter-operability with other manufac- turers MAC units relatively easy. If no management interface is desired, most of the critical operating modes of the t...

Features: The 18-bit HPFC-5000REV2. bus-interface flip-flop is designed for 2.3V to 3.6V VCC operation. It features 3-state outputs designed specifically for driving highly capacitive or relatively low- impedance loads. This device is particularly suitable for implementing wider buffer registers, I/O p...

· HY57V561620FTP

Vendor:HYNIX   Package Cooled:TSOP   D/C:08+   

Description: The high-current-output drivers consist of MOSFET output devices, which switch from VDD to GND. Each output stage also provides a very low impedance to overshoot and undershoot. This means that in many cases, external-schottky-clamp diodes are not required.

Applications: NONVOLATILE WRITE A nonvolatile write is a two step operation: it is initiated by taking CHY57V561620FTP LOW and clocking in a start bit followed by the NV Write Enable command. At this point the host can take CHY57V561620FTP back high or continue clocking in data. This data is dont care a...

Features: The HY57V561620FTP integrates four 8-bit DACs and their associ- ated circuits which include; an enhanced unity gain opera- tional amplifier output, an 8-bit data latch, an 8-bit non- volatile register and an industry standard serial interface for reading and writing data to the DACs data ...

· HCPL-0613500

Vendor:AVAGO   Package Cooled:SOP-8   D/C:5200   

Description: (2) The technical information described in this material is limited to showing representative characteristics and applied circuits examples of the products. It neither warrants non-infringement of intellectual property right or any other rights owned by our company or a third party, nor gr...

Applications: • Clock Embedded PLL clock multiplication circuit Operating clock (PLL clock) can be selected from : divided-by-2 of oscillation or one to four times the oscillation Minimum instruction execution time : 62.5 ns (operation at oscillation of 4 MHz, four times the oscillation clock, ...

Features: The Read operation of the HCPL-0613500 Flash banks is controlled by CE# and OE#, a chip enable and output enable both have to be low for the system to obtain data from the outputs. OE# is the output control and is used to gate data from the output pins. The data bus is in high impedance state ...

· HFW17R-2STE1LF

Vendor:FCI   Package Cooled:08+   D/C:10000   

· HFBR-2528Z

Vendor:AVAGO   Package Cooled:AGL   D/C:07+/08+   

Description: 8 or 32 kbytes of user NV RAM Integrated NV SRAM, real time clock, crystal, power-fail control circuit and lithium energy source Totally nonvolatile with over 10 years of operation in the absence of power Watchdog timer restarts an out-of-control processor Alarm function schedules real-tim...

Applications: Sirenza Microdevices HFBR-2528Z is a high performance Silicon Germanium Heterostructure Bipolar Transistor (SiGe HBT) designed for operation from DC to 6 GHz. The HFBR-2528Z is optimized for 3V operation but can be biased at 2V for low voltage battery operated systems. The device provides hig...

Features: The HFBR-2528Z is a high-bandwidth FET bus switch utilizing a charge pump to elevate the gate voltage of the pass transistor, providing a low and flat ON-state resistance (ron). The low and flat ON-state resistance allows for minimal propagation delay and supports rail-to-rail switching on ...

· HFBR2528Z

Description: When decimating, the user should likewise bring SYNC HIGH for at least one clock cycle, returning it LOW when a fresh output is desired. The chip will continue to update the output register on alternate rising edges of CLK. The user may leave SYNC LOW or change its value once per clock c...

Applications: Supply Current at No-Load is 55µA Minimum Over-Current Limit: 150mA Dropout Voltage is 70mV @ 50mA Load Built-in Over-Temperature Protection Fixed: 3.3V Output Max. Supply Current in Shutdown Mode < 1µA Output Noise is 210µVRMS from 10Hz to 1MHz

Features: Vcc = 50V, F = 1030MHz, Pout=1000W Peak Min, PW=1µS, DF=1% Vcc = 50V, F = 1030MHz, Pout=1000W Peak Min, PW=1µS, DF=1% Vcc = 50V, F = 1030MHz, Pout=1000W Peak Min, PW=1µS, DF=1% Vcc = 50V, F = 1030MHz, Pout=1000W Peak Min, PW=1µS, DF=1% Vcc = 50V, F = 1030MHz, ...

· HGTD3N60B3S9A

Description: Servo-Tek low ripple DC tachometer generators satisfy the need for a cost effective, very low ripple tachometer. In addition to being the first economical low ripple units of their type, the F-Series tachometers incorporate all the desirable features of the standard units such as temper...

Features: (1) The minimum DC input voltage is C0.5V. During transitions, inputs may undershoot to C2.0V for periods of less than 20 ns. Maximum DC voltage on output pins is VCC +0.5V, which may overshoot to VCC +2.0V for periods of less than 20 ns. (2) Latch-up protection is provided for stresses up...

· HD64180RC8

Description: The Am29DL163 is a 16 megabit, 3.0 volt-only flash memory device, organized as 1,048,576 words of 16 bits each or 2,097,152 bytes of 8 bits each. Word mode data appears on DQ0CDQ15; byte mode data ap- pears on DQ0CDQ7. The device is designed to be programmed in-system with the standard ...

Applications: (Copies of these documents are available online at http://assist.daps.dla.mil/quicksearch/ or http://assist.daps.dla.mil or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)

Features: The preset LED current in movie mode is 20mA. To set a different movie-mode LED current, change R2, where R2 = 60 / I LED(MOVIE). The HD64180RC8 is capable of movie-mode currents up to 100mA. The preset LED current in strobe mode is 100mA. To set a different strobe-mode LED current, change R...

· HEDT-9001A00

Description: Figure 1 shows a typical soldering profile for the D2 and D3 Packages when soldering a to a printed circuit board. The profile will vary from system to system and solders to solders. Factors that can affect the profile include the type of sol- dering system used, density and type of compone...

Applications: The ISSI HEDT-9001A00 is a very high-speed, low power, 131,072-word by 8-bit CMOS static RAM in revolutionary pinout. The HEDT-9001A00 is fabricated using ISSI's high-performance CMOS technology. This highly reliable process coupled with innovative circuit design techniques, yields high...

Features: Analog input signal power at C1 dBFS; signal-to-noise (SNR) is the ratio of signal level to total noise (first five harmonics removed). Encode = 65 MSPS. SNR is reported in dBFS, related back to converter full scale. 2Analog input signal power at C1 dBFS; signal-to-noise and distortion (SINA...

· HE8051EBCT/R

Vendor:3950   Package Cooled:TO92   D/C:08+   

Description: Member of the Texas Instruments Widebus™ Family Ideal for Use in PC133 Register DIMM Typical Output Skew . . . <250 ps VCC = 3.3 V 0.3 V . . . Normal Range VCC = 2.7 V to 3.6 V . . . Extended Range VCC = 2.5 V 0.2 V Rail-to-Rail Output Swing for Increased Noise Margin Balanced ...

Applications: The bq2085 SBS-compliant gas gauge IC for battery pack or in-system installation maintains an accurate record of available charge in Li-ion or Li-polymer batteries. The bq2085 monitors capacity and other critical parameters of the battery pack and reports the information to the system h...

Features: 1 Prior to the onset of overvoltage clamping. For voltages above this value, safe operation is limited by the overvoltage clamping energy. 2 A higher Tj is allowed as an overload condition but at the threshold Tj(TO) the over temperature trip operates to protect the switch. 3 All control logi...

· HV9921N3-G

Description: ther subdivided into: a 4-bit Device Type Identifier, and a 3-bit Chip Enable Address (0, 0, 0). To address the memory array, the 4-bit Device Type Identifier is 1010b. The 8th bit is the RW bit. This is set to 1 for read and 0 for write operations. If a match occurs on the Device Sel...

Applications: (5) Others Check mounting conditions before using other soldering methods (hot-air, hot plate, pulse heater, etc.) • The temperature profile indicates the temperature of the soldered terminal on the surface of the PC board. The ambient

Features: TRI-STATE version of LS151 Interface directly with system bus Perform parallel-to-serial conversion Permit multiplexing from N-lines to one line Complementary outputs provide true and inverted data Maximum number of common outputs 54LS 49 74LS 129 Typical propagation delay time (D to Y)...

· HCPL-2411-000E

Description: I/O lines with pull-high resistors (bit option). I/O modes of each line are con- trolled by related control register bit (PDC). I/O configurations: Schmitt trig- ger/CMOS. The PD0~PD3 can be selected as PWM outputs. INT0/INT1 are falling/rising edge selectable triggers.

Applications: Programmable for 13-Bit Linear Data or 8-Bit Companded (µ-Law) Data Available in a 48-Pin TQFP Package, a 64-Pin µ*BGA Package, and a Designed for Analog and Digital Wireless Handsets and Telecommunications Applications TX Channel AGC Function Available Through PCM Interface or...

Features: Spartan series FPGAs are implemented with a regular, flex- ible, programmable architecture of Configurable Logic Blocks (CLBs), interconnected by a powerful hierarchy of versatile routing resources (routing channels), and sur- rounded by a perimeter of programmable Input/Output Blocks (I...

· HEF4017BF

Vendor:PHI   Package Cooled:1000   D/C:97   

Description: Power MOS V® is a new generation of high voltage N-Channel enhancement mode power MOSFETs. This new technology minimizes the JFET effect, increases packing density and reduces the on-resistance. Power MOS V® also achieves faster switching speeds through optimized gate layout.

Applications: In a novel approach to this problem, DASA IMT and Seyonic SA (both of Neuchâtel, Switzerland) developed flow-through micro-fluidic dosing as part of a toolkit for experiments performed in space. As described in the following, a key element of that design was a micro- flow sensor device....

Features: Fairchilds SyncFET process embeds a Schottky diode in parallel with PowerTrench MOSFET. This diode exhibits similar characteristics to a discrete external Schottky diode in parallel with a MOSFET. Figure 12 shows the reverse recovery characteristic of the HEF4017BF.

· HK160810NJ-T

Description: The primary function of the ENDEC unit (Figure 1-2 ) is to perform the encoding and decoding necessary for compati- bility between the differential pair Manchester encoded data of the transceiver and the Non-Return-to-Zero (NRZ) serial data of the MAC unit data line In addition to encodi...

Applications: • Internal self-timed write cycle • Individual Byte Write Control and Global Write • Clock controlled, registered address, data and control • Pentium™ or linear burst sequence control using MODE input • Three chip enables for simple depth expansion ...

Features: † Component qualification in accordance with JEDEC and industry standards to ensure reliable operation over the specified temperature range. This includes, but is not limited to, Highly Accelerated Stress Test (HAST) or biased 85/85, temperature cycle, autoclave or unbiased HAST, ele...

· HK1608-10NJ-T

Vendor:TAIYO   Package Cooled:06+   D/C:34157    

· HPC46083TNH

· HEF4069BTR

· H2KC0

· H49224

Description: Phase Reference Planes The positions of the reference planes used to measure S- Parameters and to specify Ãopt for the Noise Parameters are shown in Figure 11. As seen in the illustration, the reference planes are located at the extremities of the package leads.

Applications: SFECV10M7 series for FM-receivers are monolithic type ceramic filters which utilize the energy trapped thickness vibration-mode of the piezoelectric ceramic. By taking advantage of the very low profile, new SFECV series and PFWCC(kHz filter for AM receiver) enable costomers to make AM/F...

Features: It is designed specifically for human interfaces, like control panels, appliances, toys, lighting controls, or anywhere a mechanical switch or button may be found; it may also be used for some material sensing and control applications provided that the presence duration of objects does not e...

· HD64465BP150

· HEP4024BT

Vendor:PHILIPS   Package Cooled:SOP   D/C:93   

· HCOO/H9732

· HN1A01FU-Y/D1Y

Description: 1. Selection of C1 and D1: C1 is used for a noise reduction purpose. A typical value is 0.1uF. Optimize the value in actual operating conditions if necessary. D1 is a diode for protection against reverse voltage supply. Silicon rectifier diode (WO3C, 10D1 and equivalent) is appropriate.

Applications: Read cycle time Address access time Chip select access time Output enable access time Output disable time after /S high Output disable time after /OE high Output enable time after /S low Output enable time after /OE low Data valid time after address

Features: The HN1A01FU-Y/D1Y PCI to USB controller is fully compatible with the UHCI specification v.1.1. There are two sets of software accessible registers -- PCI configuration registers and USB I/O registers. The USB I/O registers are defined in the UHCI v.1.1 specification.

· HPC10682-D

Description: The HY51V(S)17400HG/HGL is the new generation dynamic RAM organized 4,194,304 words x 4bit. HY51V(S)17400HG/HGL has realized higher density, higher performance and various functions by utiliz- ing advanced CMOS process technology. The HY51V(S)17400HG/HGL offers Fast Page Mode as a high speed...

Applications: Note: These are stress ratings only. Stresses exceeding the range specified under Absolute Maximum Ratings may cause substantial damage to the device. Functional operation of this device at other conditions beyond those listed in the specification is not implied and prolonged exposure to e...

Features: The HPC10682-D is a self contained, miniature Voltage Controlled Oscillator (VCO) that is used in conjunction with Gennums HD-LINX™ ICs. It produces a clean 1.485GHz reference clock signal for such devices as the GS1515 HDTV Reclocker and other HD-LINX™ devices. The control voltag...

· HRPG-ASCA17C

Description: NOTES: 1. WE is high for read Cycle. 2. Device is continuously selected when CE = VIL. 3. Address valid prior to or coincident with CE transition low. 4. OE = VIL . 5. Transition is measured 500mV from steady state with CL = 5pF as shown in Figure 1B. The parameter is guaranteed but not ...

Applications: Note 1: Guaranteed by design. Derived from the ISET current ratio; current-limit amplifier and external set resistor accuracies. Note 2: Tested with IOUT = 200mA and VSET raised until (VIN - VOUT) 0.8V. Note 3: Specifications to -40C are guaranteed by design, not production tested.

Features: Erase or program inhibit mode allows parallel erasing or programming of multiple chips with different data. When CE high , erasing or programming of non-target chips is inhibited, so that except for the CE, the HRPG-ASCA17C may have common inputs.

· HYUD16162BD70E

Vendor:HY   Package Cooled:BGA   D/C:05+   

Description: The MCP1700 is capable of delivering 250 mA with only 178 mV of input to output voltage differential (VOUT = 2.8V). The output voltage tolerance of the MCP1700 is typically 0.4% at +25C and 3% maximum over the operating junction temperature range of -40C to +125C.

Applications: Operating temperature range is as follows: 0C to +50C. Frequency Deviation = 34 (9.8304 MHz )/214. Error in the crystal will be reflected in variation in the desired deviation. 3Not production tested. Based on characterization. 4The output power can be varied in both ASK/FSK mode by alt...

Features: The HYUD16162BD70E employs a bi-directional two-wire bus protocol using few pins and little board space. Figure 2 illustrates a typical system configuration using the HYUD16162BD70E in a microcontroller-based system. The industry standard two-wire bus is familiar to many users but is de...

· HDSP-H107

Description: 66MHz outputs at 3.3V. These outputs are stopped when CPU_STOP# is driven active.. This selects the frequency for the CPU and CPU/2 outputs. High = 133MHz, Low=100MHz Fixed 48MHz clock output. 3.3V Function select pins. See truth table for details. Enables spread spectrum when active(Low)....

Applications: An obvious approach is to include a timer that shuts down the IC after a desired time interval. But this thwarts goal #3 by increasing the die area. The better solution is to monitor all incoming data lines for valid levels of RS-232 signal voltage. All receiver inputs will be near ground, ...

Features: The HDSP-H107/HDSP-H107 is a 3.3V, 512K x 36/ 1M x 18 Synchronous Flow-through Burst SRAM designed specifically to support unlimited true back-to-back Read/Write operations without the insertion of wait states. The HDSP-H107/ HDSP-H107 is equipped with the advanced No Bus Latency™ (NoBL...

· HC4851Q

Vendor:TI   Package Cooled:SOP16   D/C:06+   

· HA1-562A-2

· HK10054N3S-T

Vendor:700000   Package Cooled:TAIYO   D/C:2008   

Applications: Each HK10054N3S-T has a unique 64-bit identification code, which allows multiple HK10054N3S-Ts to function on the same 1Cwire bus; thus, it is simple to use one microprocessor to control many DS18B20- PARs distributed over a large area. Applications that can benefit from this feature include ...

Features: 3) An optimum layout is one with all components on the same side of the board, minimizing vias through other signal layers (the ferrite bead and bulk decoupling capacitor can be mounted on the back). Other signal traces should be routed away from the HK10054N3S-T. This includes signal t...

· HDG-040562

· HCNW4503500

Description: Tutte le informazioni contenute nel presente manuale sono state accuratamente verifi- cate, ciononostante grifo® non si assume nessuna responsabilit per danni, diretti o indiretti, a cose e/o persone derivanti da errori, omissioni o dall'uso del presente manuale, del software o dell' h...

Applications: This advanced BiCMOS design is pin compatible with the industry standard 384x family of controllers and offers significantly improved performance. Features include low operating current, 60µA start-up current, adjustable operating frequency to 2MHz, and high peak current drive capa...

Features: which increment. When the chord bits increment, the step bits double their voltage weighting. This results in an effec- tive resolution of six bits (sign + chord + four step bits) across a 42 dB dynamic range (seven chords above 0, by 6 dB per chord). In a sampling environment, Nyquist ...

· HCGF5A2E392Y

· HS362SB304

· H11D1T

Vendor:infineon   Package Cooled:2000   D/C:01+   

Description: The H11D1T uses a proprietary process and combines a dual low dropout adjustable output regulator in a single package with one output having a minimum of 6A and the other one having a 1A output current capability. This product is specifically designed to provide well regulated supplies for lo...

Applications: The H11D1T is 268,435,456 bits synchronous high data rate Dynamic RAM organized as 4 x 2,097,152 words by 32 bits, fabricated with SAMSUNGs high performance CMOS technol- ogy. Synchronous design allows precise cycle control with the use of system clock and I/O transactions are possible on ev...

Features: The FETKY product family incorporates low RDS(on), MOSFETs packaged with industry leading, low forward drop, low leakage Schottky Barrier rectifiers to offer high efficiency components in a space saving configuration. Independent pinouts for MOSFET and Schottky die allow the flexibility ...

· HH53P-A-DC6V

· HY57V641620HCTP-8

· HIP6601BIB

Vendor:INTERSIL   Package Cooled:STK   D/C:2005+   

· HPI-307

Vendor:LED   Package Cooled:Silicon photovoltaic cells   D/C:06+   

Description: DESCRIPTION The M74HC4020 is an high speed CMOS 14 STAGE BINARY COUNTER fabricated with silicon gate C2MOS technology. A clear input is used to reset the counter to the all low level state. A high level on CLEAR accomplishes the reset function. A negative transition on the CLOCK inpu...

Applications: ✔ Molded JEDEC SO-16 (Wide Body) Package ✔ Weight 0.15 grams (Approximate) ✔ Flammability rating UL 94V-0 ✔ 16mm Tape and Reel Per EIA Standard 481 ✔ Marking: Logo, Part Number, Date Code & Pin One Defined By Dot on Top of Package

Features: Designers must not rely on the absence or characteristics of any features or instructions marked "reserved" or "undefined." Intel reserves these for future definition and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes...

· HPI307

· HC1S80F1020AF

Vendor:Altera   Package Cooled:original packing   D/C:07+   

· HLMP-EL16-TVU00

Vendor:.   Package Cooled:.   D/C:07+   

Description: Wiper position is maintained in the absence of power. This is accomplished via the use of an EEPROM cell array. The device provides for two storage methods, which include an auto-store capability and a command-initiated storage function. The EEPROM cell array is specified to accept greater th...

Applications: • True Dual-Ported memory cells which allow simulta- neous access of the same memory location • High-speed access Commercial: 25/35/55ns (max.) • Low-power operation HLMP-EL16-TVU00 Active: 230mW (typ.) Standby: 3.3mW (typ.) HLMP-EL16-TVU00 Active: 230mW (ty...

Features: The HLMP-EL16-TVU00 is a high sensitive and low dark current 480−elements color linear image sensor which includes CCD drive circuit, clamp circuit and sample & hold circuit. The CCD drive circuit consists of the pulse generator. therefore it is possible to easy drive by applying ...

· HD100131

Description: !IMPORTANT! AC power must be disconnected from TB2 terminals 1 and 2 before making modifications or installing user-supplied components on the DMS-EB-AC/DC board! In many applications, the DMS-EB-AC/DC installation is subject to electrical-code requirements (for example, the NEC in the USA). ...

Applications: The HD100131 and HD100131 are designed to limit at 0.44-A load. These power distribution switches, available in 8-pin small-outline integrated circuit (SOIC) and 8-pin plastic dual-in-line packages (PDIP), operate over an ambient temperature range of C40C to 85C.

Features: This bidirectional shift register is designed to incorporate virtually all of the features a system designer may want in a shift register they feature parallel inputs parallel outputs right-shift and left-shift serial inputs operating-mode-control inputs and a direct overriding clear line...

· HE541

Vendor:TI   Package Cooled:TSOP48   D/C:2007+   

Description: The key parameters of a damper diode are the peak forward voltage (VFP), the forward voltage (VF ) and the recovery time (trr). Reverse recovery time : trr The table in fig.1 gives the maximum reverse recovery time for the three high frequency damper diodes.

Applications: Serial data input pin. Conforms to the SMBUS specification of a Slave Receive/Transmit device. This pin is an input when receiving data. It is an open drain output when acknowledging or transmitting data. See 2-Wire SMBUS Control Interface on page 7.

Features: (1) Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. (2) DBV/DCK: The actual top-side marking has one additional character that designates the assembly/test site. YEP/YZP: The actual top-side marki...

· HEF4072BDB

Description: Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is functional, but do not guarantee specific performance limits. Electrical Characteristics state DC and AC electrical specifications under ...

Applications: Test levels: (A) 100% tested at 25C. Overtemperature limits by characterization and simulation. (B) Limits set by characterization and simulation. (C) Typical value only for information. The 1-dB compression point is measured at the load with 50-Ω double termination. Add 3 dB to refer ...

Features: Note 5: The HEF4072BDB VID DAC is tested in a feedback loop that adjusts VOSENSE to achieve a specified feedback voltage (VFB = 0.8V) for each DAC VID code. Note 6: Each built-in pull-up resistor attached to VID inputs also has a series diode connected to VCC to allow input voltages higher ...

· HT-170USD

Vendor:.   Package Cooled:.   D/C:07+   

· HLMP-AD16-RU0YY

Vendor:.   Package Cooled:.   D/C:07+   

· HI1005-1B56NJMT

Vendor:ACX   Package Cooled:O402   D/C:01+   

Description: Note 5: Each digital input includes a small positive or negative current source to float the CMOS input to V+ or VC potential if it is unconnected. The table shows the current due to this source when the input is driven at the supply voltage opposite from the float potential. Pins CS/HOLD, F3,...

Applications: 1) Drive capability: constant-current output 50mA (Max.) 2) Can set the constant-current output value by one external resistor. 3) 3 wire serial (Data, Clock, Latch) control from micro computer 4) With ENABLE pin 5) Power ON reset function 6) Built-in thermal-shut-down circuit 7) Low powe...

Features: The HI1005-1B56NJMT performs source decode functions, including - conditional access, MPEG2 transport stream de-mux, MPEG2 video decode, audio decode and processing, graphics generation, video processing, and image composition and display. A 32-bit 200 MHz VLIW processor, referred to as the...

· HA1194

Vendor:DIP   Package Cooled:70   D/C:04+   

Description: The SC16C2550B is pin compatible with the ST16C2550. It will power-up to be functionally equivalent to the 16C2450. The SC16C2550B provides enhanced UART functions with 16-byte FIFOs, modem control interface, DMA mode data transfer. The DMA mode data transfer is controlled by the FIFO trigg...

Applications: Number of channels : 6 (8/16-bit 6 channels) PPG operation of 8-bit or 16-bit A pulse wave of given intervals and given duty ratios can be output. Pulse interval : fsys, fsys/21, fsys/22, fsys/23, fsys/24, 128µs (at oscillation of 4 MHz, fsys = system clock frequency of 16 MHz, fo...

Features: automatically powers down into a low-power stand-by mode. The HA1194 is packaged in the 300-mil slim package and is available in a cerDIP package equipped with an erasure window to provide for reprogrammability. When exposed to UV light, the PROM is erased and can be reprogrammed. The memory ...

· HD404344A52S

Vendor:SAMSUNG   Package Cooled:.   D/C:08+   

Description: Features • Low smear (C100dB Typ. at F5.6) • Low power consumption (C38% compared with ICX209AL) • High sensitivity (+3dB at F1.2 compared with ICX209AL) • High saturation signal • Supply voltage12V • Horizontal register:3.3V drive • Reset gate:...

Applications: The HD404344A52S/HD404344A52S are 12-bit data-acquisition systems specifically designed for use in applications with mixed +5V (analog) and +3V (digital) supply volt- ages. They operate with a single +5V analog supply or dual 5V analog supplies, and combine an 8-channel multiplexer, high-band...

Features: Rectifiers advanced line of power MOSFET transistors. The efficient geometry design achieves very low on-state re- sistance combined with high transconductance. HEXFET transistors also feature all of the well-established advan- tages of MOSFETs, such as voltage control, very fast switch- ...

· HCF40160

Vendor:ST   Package Cooled:ST   D/C:99+   

Description: A read cy cle is executed by setting /W at a high lev el and /OE at a low lev el while /S are in an activ e state. When setting /S at a high lev el, the chip is in a non- selectable mode in which both reading and writing are disabled. In this mode, the output stage is in a high- impedance...

Applications: Both the The MMC2080/2075 are members of the low-power, high-performance M•CORE family of 32-bit microcontroller units (MCUs). The M•CORE is a streamlined execution engine that provides many of the performance enhancements found in mainstream reduced instruction set computers (RIS...

Features: the memory by taking care of all of the special op- erations that are required to update the memory contents. The end of a program or erase operation can be detected and any error conditions identi- fied. The command set required to control the memory is consistent with JEDEC standards....

· HP13621.05

· H1563S

Description: At enable voltages greater than 0.4V but less than 0.8V the outputs will remain off but the sleep current may be greater than 1µA. SINK X current matching is greatest percentage delta between output currents with respect to the mean, with VSINK X both at 1V and 5V and RSET = 1.54K...

Applications: Lead Style Channels Common Channel Wiring Agilent Part # & Options Commercial MIL-PRF-38534 Class H MIL-PRF-38534 Class K Standard Lead Finish Solder Dipped Butt Cut/Gold Plate Gull Wing/Soldered Crew Cut/Gold Plate Class H SMD Part # Prescript for all below Either G...

Features: The MSK 4221 is a complete H-Bridge circuit to be used for DC brushed motor control or Class D switchmode amplifiers. All of the drive/control circuitry for the lowside and highside switches are included internally. The user provides a digitally compatible PWM signal (a reference divider is ...

· H1100IL

Vendor:HARRIS   Package Cooled:07+   D/C:96+   

Description: Note: Stresses greater than those listed under MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not imp...

Applications: -12V TCK GND TDO VCC VCC INTB- INTD- PRSNT1- RSVD PRSNT2- GND GND RSVD GND CLK GND REQ- VCC AD31 AD29 GND AD27 AD25 +3.3V C/BE3- AD23 GND AD21 AD19 +3.3V AD17 C/BE2- GND IRDY- +3.3V DEVSEL- GND LOCK- PERR- +3.3V SERR- +3.3V C/BE1- AD14 GND AD12 AD10 ...

Features: The all-digital H1100IL/24 supports a variety of audio I/O configurations including direct connection to the H1100ILrystalH1100ILlear H1100ILS4297 AH1100IL 97 H1100ILodec. A sec- ondary AH1100IL 97 2.0 interface provides support for multi-channel and digital docking solutions. Added extended...

· HSMBJ5919CTR-13

Vendor:Microsemi   Package Cooled:DO-214AA   D/C:2009+   

· HM62H256AK-12NB

· HMS4190JP7

· HMK325BJ472KF-T

Pages: 11/883  At 10 11 12 13 14 15 16 17 18 19 20 Under 10

Quick Search Part No.

Home About Us Map Online Inquiry
© 2009-2011 ExchangeIC.com Corp.All Rights Reserved