Current position: Home > Products > Index U > Page 13
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9 All

· UPD6467GR-562-E1

Vendor:NEC   Package Cooled:SSOP   D/C:09+   

· UPD4013BG-T2

Vendor:NEC   Package Cooled:SOP   D/C:99/P3   

Description: Thin Shrink Small Outline Package (TSSOP) Thin Shrink Small Outline Package (TSSOP) Thin Shrink Small Outline Package (TSSOP) Thin Shrink Small Outline Package (TSSOP) Thin Shrink Small Outline Package (TSSOP) Thin Shrink Small Outline Package (TSSOP) Thin Shrink Small Outline Package ...

Applications: 1.1 Applications Features Typical applications in which the UPD4013BG-T2 can be used are: Cable replacement Portable computers, PDA Modems Handheld data transfer devices Cameras Computer peripherals Other type of devices that require the wireless communication provided by Blu...

Features: The UPD4013BG-T2/UPD4013BG-T2 feature a shutdown input. Drive SHDN low to reduce the supply current to 1µA (max). Shutdown also forces TOUT into a high- impedance state that allows the signal line to be safely controlled by other transmitters. Drive SHDN high for normal operation.

· UPD4013BGT2

Vendor:NEC   Package Cooled:714   D/C:99/P3   

· UPD6221GS

Vendor:NEC   Package Cooled:SMD   D/C:00+   

Description: Reverse Current Forward Current Maximum Output Voltage (LM4041-ADJ) Power Dissipation (TA = 25˚C) (Note 2) M3 Package Z Package M7 Package Storage Temperature Lead Temperature M3 Packages Vapor phase (60 seconds) Infrared (15 seconds) Z Package

Applications: The Direct Rambus RIMM module consists of 144 Mbit Direct Rambus DRAM (Direct RDRAM™) devices. These are extremely high-speed CMOS DRAMs organized as 8M words by 18 bits. The use of Rambus Signaling Level (RSL) technology permits 600 MHz to 800 MHz transfer rates while using convention...

Features: FEATURES High Performance Member of Pin-Compatible TxDAC Product Family Excellent Spurious-Free Dynamic Range Performance SNR @ 5 MHz Output, 125 MSPS: 73 dB Twos Complement or Straight Binary Data Format Differential Current Outputs: 2 mA to 20 mA Power Dissipation: 135 mW @ 3.3 V ...

· UMK107TH090FZ

· UVK1A153MHD

· UCD1C681MNL1GS

Vendor:NICHICON   Package Cooled:SMD   D/C:07+   

· UPD8169TEG

Description: power consumption. Broadband operation gives you high flexibility for multi-band frequency mappings. The IC is available in a shrinked small-outline 28-pin package (SSO28). The U2893B offers the same functionality with other divider ratios.

Applications: Analog Interface The IRMCK203 has a built-in interface to the ADS7818 (BurrBrown) serial A/D converter (12 bit). Dc bus voltage feedback, external speed reference and Leg Shunt current can be obtained via ADS7818 in conjunction with MUX circuitry. An analog feedback application example i...

Features: Minor changes to Table 7-4, Table 7-5, Table A-9; Clarifications in Section 11.10.6, SCI x Control Register 3 (SCIxC3), Section 11.7, Interrupts and Status Flags, Section 11.8.1, 8- and 9-Bit Data Modes, PTG availability in 48-pin package (see Table 2-2)

· UN4112

Description: When the BLANKING input is high, the output source drivers are disabled (OFF); the DMOS sink drivers are ON, the information stored in the latches is not affected by the BLANKING input. With the BLANKING input low, the outputs are controlled by the state of their respective latches.

Applications: Microchip offers a QTP Programming Service for fac- tory production orders. This service is made available for users who choose not to program a medium to high quantity of units and whose code patterns have stabi- lized. The devices are identical to the OTP devices but with all EPROM lo...

Features: tPZLOutput enable time to low level1025 See Figure 6ns tPLZOutput disable time from low level1725 Output skew (tsk(o)) is the magnitude of the time delay difference between the outputs of a single device with all of the inputs connected together. ¶ Part-to-part skew (tsk(pp)) is the...

· UC39431N

Vendor:uni   Package Cooled:uni   D/C:dc01   

Description: CLOCK SYNC- is an input for synchronizing to an external clock. The sync circuit will trigger on the edges of the ap- plied clock and effectively shorten the period of the internal oscillator on each cycle. The frequency can be increased from a free running 22 KHz to 25 KHz maximum. The c...

Applications: • Drives N-channel High-Side and Low-Side MOSFETs in a synchronous buck configuration • 12V High-Side and 12V Low-Side Drive • Internal Adaptive Shoot-Through Protection • Integrated Bootstrap Diode for High-Side Drive • Fast rise and fall times ̶...

Features: 2. Use only a true open-collector device (preferably a discrete transistor) for the inhibit input. Do Not use a pull-up resis- tor, or drive the input directly from the output of a TTL or other logic gate. T disable the output voltage, the controlo pin should be pulled low to less tha...

· UC3854N637

· UMA1016CT

Description: Split supplies of 3.3V and 2.5V are used. The 3.3V power supply powers a portion of the I/O and the core. The 2.5V is used to power the remaining outputs (CPU and APIC). 2.5V signaling follows JEDEC standard 8-X. Power sequencing of the 3.3V and 2.5V supplies is not required.

Applications: In addition to the requirements of termination and EMC compatibility, computing devices are required to be tested for ESD susceptibility. This test is described in the IEC 61000-4-2 and is already in place in Europe. This test requires that a device tolerates ESD events and remains operatio...

Features: Composite type with 2 NPN transistors in one package facilitating high-density mounting. The UMA1016CT is composed of 2 CPH3216 equivaient chips . Ultrasmall package facilitates miniaturization in end products (mounting height : 0.9mm).

· UPC4570G2-E2559

· UPD65640GB-Y43

· UCC2843N

· URZ2G470MHD

· UA709BHC

Description: Internally trimmed offset voltage: Low input bias current: Low input noise voltage: Low input noise current: Wide gain bandwidth: High slew rate: Low supply current: High input impedance: Low total harmonic distortion : Low 1/f noise corner: Fast settling time to 0.01%:

Applications: Since the device will not acknowledge during a write cycle, this can be used to determine when the cycle is complete (this feature can be used to maximize bus throughput). Once the stop condition for a write com- mand has been issued from the master, the device ini- tiates the internally time...

Features: The 128-bit instruction line, which can contain up to four 32-bit instructions, accommodates a variety of parallel operations for concise programming. For example, one instruction line can direct the DSP to conditionally execute a multiply, an add, and a subtract in both computation block...

· UDZS/6.2B

Vendor:ROHM   Package Cooled:12000   D/C:07+   

Applications: The MC623 consists of a positive temperature coefficient (PTC) temperature sensor and dual threshold detector. Temperature set point programming is easily accomplished with external programming resistors from the HIGH SET and LOW SET inputs to VCC. The HIGH LIMIT and LOW LIMIT outputs re...

Features: Thermal Design The UDZS/6.2B incorporates an internal thermal shutdown that protects the device when the junction temperature exceeds the maximum allowable junction temperature. Although this device can operate with junction tempera- tures in the range of 1508C, it is recommended that the se...

· UMV1H010MFD

· UC2805Q

Vendor:UC   Package Cooled:PLCC   D/C:95   

Description: The PALCE29MA16 has 16 macrocells, one for each I/O pin. Each I/O macrocell can be programmed for combinatorial, registered or latched operation (see Fig- ure 2). Combinatorial output is desired when the PAL device is used to replace combinatorial glue logic. Reg- isters and Latches are...

Applications: The UC2805Q and UC2805QHV are single-channel isolated signal- conditioning modules which accept the outputs from thermocouple, milli-volt, voltage, and process current signals. Unlike conventional signal conditioners, the UC2805Q and UC2805QHV are complete microcomputer-based data acquisi...

Features: The input signal is measured against a voltage reference that can be generated on-chip or supplied externally. The digital output data is provided over a simple parallel interface that easily connects to digital signal processors (DSPs). An out-of-range monitor reports when the input rang...

· U4119B

Description: Device programming and erasure are initiated through command sequences. Once a program or erase oper- ation has begun, the host system need only poll the DQ7 (Data# Polling) or DQ6 (toggle) status bits or monitor the Ready/Busy# (RY/BY#) output to deter- mine whether the operation is co...

Applications: The MAX4649 successfully meets the quality and reliability standards required of all Maxim products. In addition, Maxims continuous reliability monitoring program ensures that all outgoing product will continue to meet Maxims quality and reliability standards.

Features: The U4119B has a hardware JPEG compression/decompression engine that can decode a 2M pixel image in less than 150 ms. Non-standard Huffman JPEG tables are also supported using a combination of hardware and software resources. The engine can also do motion JPEG encoding and decoding.

· UPW1J471MHD6

· UPD780058GC-076-8BT

Vendor:NEC   Package Cooled:QFP   D/C:00+   

· UPD9602AD

Description: RON is 4Ω typical Low bit-to-bit skew: 200ps Low crosstalk: C65dB @ 10MHz Low Current Consumption: 20µA Near-Zero propagation delay: 250ps Switching speed: 9ns Channel On-Capacitance: 6pF (typical) VCC Operating Range: +3.0V to +3.6V ESD>2000V . . . Human Body Mod...

Applications: Non-inverting 3-state outputs 2-way asynchronous data bus communication Low-power dissipation Complies with JEDEC standard no. 7A ESD protection: x HBM EIA/JESD22-A114-B exceeds 2000 V x MM EIA/JESD22-A115-A exceeds 200 V. s Multiple package options s Specified from −4...

Features: Note 1. Exceeding the absolute maximum rating may damage the device. Note 2. The device is not guaranteed to function outside its operating rating. Note 3. Devices are ESD sensitive. Handling precautions recommended. Human body model, 1.5k in series with 100pF. Note 4. Off is VENQ0.8Vand on i...

· UAA3537

Description: NOTE: 1. RX outputs the bus state. If the bus level is below the receiver threshold (i.e., all transmitters passive), then RX will be floating (i.e., high, considering external pull-up resistance). Otherwise, if the bus level is above the receiver threshold (i.e., at least one transmitter i...

Applications: ICS reserves the right to make changes in the preliminary device data identified in this publication without notice. ICS advises its customers to obtain the latest version of all device data to verify that information being relied upon is current and accurate.

Features: Note 1 Absolute Maximum Ratings indicate limits beyond which damage to the device may occur DC and AC electrical specifications do not apply when operating the device beyond its specified operating ratings Note 2 When the input voltage exceeds the power supplies the current should be limited...

· UPC1321

Vendor:NEC JAPAN   Package Cooled:ZSIP15   D/C:93   

Description: Information present at any register is transferred to the respective latch when the STROBE is high (serial-to-parallel conversion). The latches will continue to accept new data as long as the STROBE is held high. Applications where the latches are bypassed (STROBE tied high) will require...

Applications: 1) CPD is defined as the value of the ICs internal equivalent capacitance which is calculated from the operating current consumption without load. (Refer to Test Circuit). Average current can be obtained by the following equation. ICC(opr) = CPD x VCC x fIN + ICC

Features: The CENTRAL SEMICONDUCTOR UPC1321A, Silicon Ultra-Fast Recovery Rectifier is a high quality, well constructed, highly reliable component designed for use in all types of commercial, industrial, entertainment, computer, and automotive applications.

· UPC1127G

Vendor:advantage series   Package Cooled:SOP   D/C:89+   

Description: *Serial Port: 16C550 UART-compatible RS-232 x 1 serial ports with 16-byte FIFO *Game Port: Supports one Joystick game port *USB: Four USB ports, two internal and two external *Keyboard: PS/2 6-pin Mini DIN *Mouse: PS/2 6-pin Mini DIN *BIOS: AMI PnP Flash BIOS *CMOS: Battery backup *Power...

Applications: (VIN = +15V, VDD = AVDD = V SHDNA = V SHDNB = VBST = VILIM = 5V, VOUT = VREFIN = VVTTI = 2.5V, UVP/OVP = STBY = FB = SKIP = GND, PGND1 = PGND2 = LX = GND, TON = OPEN, VVTTS = VVTT, TA = -40C to +85C, unless otherwise noted. Typical values are at TA = +25C.) (Note 1)

Features: The UPC1127G comprises a digitally controlled variable attenuator of 0 dB to C59.45 dB, which is preceded by a low noise, fixed gain buffer and is followed by a low distortion high power ampli- fier. The UPC1127G accepts a differential or single-ended input signal. The output is specified ...

· UPC13562C

· UA204HC

Description: The CY7C1380D/CY7C1382D SRAM integrates 524,288 x 36 and 1,048,576 x 18 SRAM cells with advanced synchronous peripheral circuitry and a two-bit counter for internal burst operation. All synchronous inputs are gated by registers controlled by a positive-edge-triggered Clock Input (CLK). The sy...

Applications: Applications This line of Schottky diodes is optimized for use in mixer applications at millimeter wave frequencies. Some suggested mixer types are single ended and single balanced for the single and series pair. The anti-parallel pair is ideal for harmonic mixers.

Features: The UA204HCM provides 132K words of on-chip SRAM memory. This memory is divided into Program and Data Memory blocks in each DSPs memory map. In addition to the internal memory space, the two cores can address two additional and separate off-core memory spaces: I/O space and shared memory...

· U209B-M

Vendor:Atmel   Package Cooled:14-DIP   D/C:08+   

· U209BM

Vendor:tfk   Package Cooled:tfk   D/C:dc00   

Description: The TMC22x5yA family of Digital Video Decoders offers unprecedented, broadcast-quality video processing perfor- mance in a single chip. It accepts line-locked or subcarrier- locked composite, YC, or D1 digital video and produces dig- ital components in a variety of formats.

Applications: − Glueless Interface to Asynchronous Memories: SRAM and EPROM − Glueless Interface to Synchronous Memories: SDRAM and SBSRAM − 256M-Byte Total Addressable External Memory Space 16-Bit Host-Port Interface (HPI) Two Multichannel Buffered Serial Ports (McBSPs) − Di...

Features: 2.5% output accuracy (25˚C) Low dropout voltage: 450mV @ 1A (typ, 5V out) Wide input voltage range (2.7V to 10V) Precision (trimmed) bandgap reference Guaranteed specs for -40˚C to +125˚C 1µA off-state quiescent current Thermal overload protection Foldback curre...

· UPD442012AGY-BB85X-MJX

Description: In applications where only mono 100W / 4Ω operation is desired, e.g. subwoofer, the output filter may be simplified.Two filter sections may be employed in lieu of sections in parallel. Inductors may be ½ the value with twice the current rating. Capacitors are double the value an...

Applications: TIE Circuit Reset (Input). A logic low at this input resets the Time Interval Error (TIE) correction circuit resulting in a realignment of input phase with output phase as shown in Figure 13. The TCLR pin should be held low for a minimum of 300 ns. This pin is internally pulled down to VSS.

Features: The READ instruction outputs the serial data of the addressed memory location on the DO pin. A dummy zero bit precedes the 16 bit (x16 organization) or 8 bit (x8 organization) output string. The output data bits will toggle on the rising edge of the CLK and are stable after the speci@...

· UTC79L05

Description: The BA178!!T and BA178!!FP series are 3pin fixed positive output voltage regulators. These regulators are used to provide a stabilized output voltage from a fluctuating DC input voltage. There are 11 fixed output voltages, as follows : 5V, 6V, 7V, 8V, 9V, 10V, 12V, 15V, 18V, 20V, and 24V. The ...

Applications: Note 4: Quiescent current increases with load current, refer to plot of IQF vs ILOAD. Note 5: This IC includes overtemperature protection that is intended to protect the device during momentary overload conditions. Junction temperature will exceed 125C when overtemperature protection is acti...

Features: Program memory can store both instructions and data, permit- ting the UTC79L05 to fetch two operands in a single cycle, one from program memory and one from data memory. The UTC79L05 can fetch an operand from program memory and the next instruction in the same cycle.

· UPD6126AG-547-T1

Vendor:NEC   Package Cooled:SMD   D/C:93+   

Description: 12. Measured by the voltage drop between A and B pins at the indicated current through the switch. On Resistance is determined by the lower of the voltages on the two (A or B Ports). 13. Flatness is defined as the difference between the maximum and minimum value of On Resistance over the s...

Applications: (Reset) - The RST pin functions as a microprocessor reset signal. This pin is driven low 1) when VCC is outside of nominal limits; 2) when the watchdog timer has timed out; 3) during the power up reset period; and 4) in response to a pushbutton reset. The RST pin also functions as a p...

Features: The UPD6126AG-547-T1x0 Neuron chip implements a node for LonWorks distributed intelligent control networks. It incorpo- rates, on a single chip, the necessary communication and control functions, both in hardware and firmware, that facilitate the design of a LonWorks node...

· UC2575HYVT-5

Vendor:UNI   Package Cooled:TO220-5   D/C:05+   

· UM62256DK-70LL

Vendor:UM   Package Cooled:2500   D/C:01+   

· UC2842AN595

· UA741CN

Description: These Precision Optical Perform- ance AlInGaP LEDs provide superior light output for excellent readability in sunlight and are extremely reliable. AlInGaP LED technology provides extremely stable light output over long periods of time. Precision Optical Performance lamps utilize t...

Applications: 4.4.3 Group C inspection. Group C inspection shall be conducted in accordance with the conditions specified for subgroup testing in appendix E, table VII of MIL-PRF-19500. Electrical measurements (end points) shall be in accordance with the applicable steps and

Features: FEATURES 10-Bit Temperature-to-Digital Converter Temperature Range: C40 C to +125 C Typical Accuracy of 0.5 C at +40 C SMBus/I2C® Compatible Serial Interface 3 A Power-Down Current Temperature Conversion Time: 29 s Typ Space-Saving 6-Lead (UA741CN) and 5-Lead (UA741CN) SOT-23 Pac...

· UMK107CG271JZ-B

· UPD98421GN

Vendor:TQFP   Package Cooled:NEC   D/C:02+   

Description: Blanking the noise pulse in this way is very effective, but some of the interference can still reach the audio output due to the loss of carrier during the blanking interval. For this purpose, an additional delay, blanking interval, and audio gates are included to further suppress any ...

Applications: The UPD98421GN is a 8,388,608-bit static random access memory (SRAM) organized as 524,288 words by 16 bits/1,048,576 words by 8 bits. Fabricated using Toshiba's CMOS Silicon gate process technology, this device operates from a single 2.3 to 3.3 V power supply. Advanced circuit technology pro...

Features: The frequency of this oscillator is stabilized by surface-acoustic-wave (SAW) technology. This results in ex- cellent performance from a compact, rugged, hermetically-sealed oscillator operating at the fundamental fre- quency of 1030.0 MHz. The high-reliability UPD98421GN is designed for use i...

· UA79L12AHC

Vendor:FAI   Package Cooled:CAN3   D/C:04+   

· UPW2C330MHD

· UPG152TA-T1

· UMK107TH680KZ-B

· UPD74HC32GS-E2

Vendor:NEC   Package Cooled:02/P2   D/C:2450   

Description: The listed characteristics are ensured over the operating range of the integrated circuit. Typical characteristics specify mean values expected over the production spread. If not otherwise specified, typical characteristics apply at TA = 25 C and the given supply voltage.

Applications: Output load ranges specified in Table 2 Output ripple/noise DC output initial voltage set point Temperature and warm up drift (Ambient +0C to +70C at full load with a maximum rate of change of 5C per 10 minutes but no more than 10C per hour) • Output load transient with: ...

Features: • 13 I/O pins with individual direction control • High current sink/source for direct LED drive • Analog comparator module with: - Two analog comparators - Programmable on-chip voltage reference (VREF) module - Programmable input multiplexing from device inputs an...

· UPD74HC32GSE2

Vendor:NEC   Package Cooled:2450   D/C:02/P2   

· UPD4481182GF-C60Y-A

· UF208G

Vendor:ON   Package Cooled:SMD   D/C:06+   

· UPC8178TB

· UC56004DF

Description: The HYS64/72D32000GU and HYS64/72D64020GU are industry standard 184-pin 8-byte Dual in- line Memory Modules (DIMMs) organized as 32M 64 and 64M 64 for non-parity and 32M x 72 and 64M x 72 for ECC main memory applications. The memory array is designed with 256Mbit Double Data Rate Synchron...

Applications: The advanced and highly flexible digital output interface enables performance video decoding and conversion in line- locked clock based systems. This makes the device ideally suited for a broad range of applications with diverse analog video characteristics, including tape based sources, ...

Features: The programmable features of the UC56004DF support two input modes to program the M divider and N output divider. The two input operational modes are parallel and serial. Figure 1 shows the timing diagram for each mode. In parallel mode the nP_LOAD input is LOW. The data on inputs M0 thro...

· UPD424210LE-60-G-SGJP

Vendor:NEC   Package Cooled:179   D/C:9745   

· UPD75308GF-T06-3B9

Vendor:NEC   Package Cooled:QFP   D/C:35431   

Description: This is a dual function pin. In the IDT Standard mode, the EF function is selected. EF indicates whether or not the FIFO memory is empty. In the FWFT mode, the OR function is selected. OR indicates the presence of valid data on the B0-B35 outputs, available for reading. EF/OR is synchronized ...

Applications: The X9269 is a integrated microcircuit incorporating four resistor arrays and their associated registers and counters and the serial interface logic providing direct communication between the host and the digitally controlled potentiometers. This section provides detail description of t...

Features: Figure 1 shows a block diagram of the UPD75308GF-T06-3B9, and pin descriptions are given in Table 1. The 64-bit ROUPD75308GF-T06-3B9 stores the devices unique serial code. The scratchpad memory contains the 2-byte temperature register that stores the digital output from the temperature sensor...

· UPJ1V152MHD6

· UC2851J

Description: The 74F151A is a logic implementation of a single-pole, 8-position switch with the switch position controlled by the state of three Select (S0, S1, S2) inputs. True (Y) and complementary (Y) outputs are both provided. The Enable input (E) is active Low. When E is High, the Y output is Hig...

Applications: Riedon's TO-220 precision foil resistors satisfy demanding applications for high accuracy and stable power resistors housed in the convenient TO-220 case. The PF1220’s Nichrome foil resistance element makes a wide resistance range available. It is bonded to an Al2O3 substrate ensuring ...

Features: The Burst Write command is initiated by applying logic low level to CS , CAS and WE while holding RAS high at the rising edge of the clock. The address inputs determine the starting column address. Data for the first burst write cycle must be applied on the DQ pins on the same clock cycle th...

· U6820MB

Vendor:TFK   Package Cooled:1528   D/C:SMD   

Description: These programmable array logic devices feature high speed and functional equivalency when compared with currently available devices. These IMPACT-X™ circuits combine the latest Advanced Low-Power Schottky technology with proven titanium-tungsten fuses to provide reliable, high-perform...

Applications: This pin provides the bus load resistor with a path to ground which contributes less than 0.1 volts to the bus offset voltage when sinking the maximum current through one unit load resistor. The transceivers maximum bus leakage current contribution to VOL from the LOAD pin when in a loss of ...

Features: Undershoot Clamp Diodes Low Power Consumption (ICC = 0.25 mA Typical) VCC Operating Range From 2.3 V to 3.6 V Data I/Os Support 0 to 5-V Signaling Levels (0.8-V, 1.2-V, 1.5-V, 1.8-V, 2.5-V, 3.3-V, 5-V) Control Inputs Can be Driven by TTL or 5-V/3.3-V CMOS Outputs Ioff Supports Partial-Powe...

· UPD78002AGK-C37-9ET

Vendor:NEC   Package Cooled:QFP   D/C:99+   

Description: The MAX4144/MAX4145/MAX4146 differential line receivers offer unparalleled high-speed, low-distortion performance. Using a three op-amp instrumentation amplifier architecture, these ICs have fully symmetrical differential inputs and a single-ended output. They operate from 5V power supplies a...

Applications: DC bus capacitor filter with NTC inrush current limiter IR2233 monolithic 3-phase HVIC driver Driver stage for brake transistor On-board +15V and +5V power supply MOV surge suppression at input DC bus voltage and current feedback Protection for short-circuit, earth/ground fault, o...

Features: The UPD78002AGK-C37-9ET center tap Schottky rectifier has been expressly designed to meet the rigorous requirements of hi-rel environments. It is packaged in the hermetic surface mount SMD-1 ceramic package. The device's forward voltage drop and reverse leakage current are optimized for ...

· UCC383TDKADJ

· UPD784216GF-529-3BA

· UV1316/APG-3

· USB3300

· UMK107CH271JZ-F

· U8811-IB103H

Vendor:EMC   Package Cooled:07+   D/C:10000   

· UPD63AGS-475

Description: The components of the video signal of the inset source have to be fed in a digitized form to the SDA 9188-3X (figure 1). Amplitude resolution of the signal components is 6 bit at a sampling rate of 13.5 MHz for the luminance signal and 3.375 MHz for the chrominance signals.

Applications: The HT815D0 has a built-in RC oscillator which requires only one external resistor for normal ap- plications. The oscillator frequency is typically 96kHz for an external resistor of 530kW. The re- quired oscillator frequency may vary with differ- ent sampling rates in the process of voi...

Features: Timing delays within the CY7C344 may be easily determined using Warp®, Warp Professional™, or Warp Enterprise™ software. The CY7C344 has fixed internal delays, allowing the user to determine the worst case timing delays for any design.

· UCC5622MWPTR

Vendor:TI   Package Cooled:SSOP36   D/C:07+   

Description: • Fault Protected 16-Channel 12-Bit A/D Converter with Sample & Hold, Reference, Clock and 3-State Outputs • Fast Conversion, less than 15µS • 2s Complement and Serial Data Output • Remote Analog Ground Sensing • Overvoltage Protected Input (50 V o...

Applications: NOTES 1Stresses above those listed under Absolute Maximum Ratings may cause perma- nent damage to the device. This is a stress rating only; functional operation of the device at these or any other conditions above those listed in the operational sections of this specification is not impl...

Features: Broadcoms Alti-PHY technology targets cost-sensitive applications where basic Ethernet functionality is required. The UCC5622MWPTR/TF provides all of the required features of a fully compliant IEEE 802.3u 10/100BASE-TX/FX transceiver. A full custom circuit design optimizes the cost of the ...

· UC1548

Description: As shown in Figure 4, the VSENSE input is connected to the collector of NPN transistor through an inverting buffer transistor (2N3904 or PMBT3904D) which amplifies the signal from the low-value current sensing resistor in the ground return leg of the fan circuit. During normal fan operati...

Applications: Unless otherwise specified RCL = 0Ω, VCC = 34 VDC Electrical specifications are derated for power supply voltages other than 34 VDC. AV = -1, measured in false summing junction circuit. Devices shall be capable of meeting the parameter, but need not be tested. Typical parameters are f...

Features: Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 ASLIC Device DC Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 ASLIC Device Relay Driver Specifications . . . . . . . . . . . . . ....

· UUE1V470MNS1MS

Vendor:NICHICON   Package Cooled:SMD   D/C:07+   

· U18C

Description: 3. Dropout Voltage is defined as the input to output differential at which the output voltage drops 2% below its nominal value measured at 1V differential. For outputs below 2.5V, dropout voltage is the input-to-output voltage differential with the minimum input voltage 2.5V. Minimum input op...

Applications: The U18C is a 7-watt U18CF MOSFET Amplifier Module for 7.2-volt portable radios that operate in the 440- to 520-MHz range. The battery can be connected directly to the drain of the enhancement-mode MOSFET transistors. Without the gate voltage (V GG=0V), only a small leakage current flows...

Features: This is a bidirectional pin used to transfer addresses and data into and out of the device. It is an open drain terminal. Therefore, the SDA bus requires a pull-up resistor to VCC (typical 10 kΩ for 100 kHz, 2 kΩ for 400 kHz and 1 MHz).

· UC3856NG4

Description: † Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating conditions is not implied. E...

Applications: DESCRIPTION Using the latest high voltage technology based on a patented strip layout, STMicroelectronics has designed an advanced family of IGBTs, the PowerMESH™IGBTs,withoutstanding perfomances. The suffix H identifies a family optimized to achieve very low switching times for h...

Features: Typical Values, TA = 25˚C Input Offset Voltage1mV max TCVos (UC3856NG4)15µV/˚C max TCVos (UC3856NG4)30µV/˚C max CMRR80dB Min Extended CMVR-5V to 36V Output Voltage SwingRail to Rail Bandwidth80KHz Operating Temperature Range (Ambient) -40˚C to 125...

· UA723CFNO13UA723CFNO13UA723CFNO13

· UCC3808N-2274

· UN217-TX

Vendor:PANASONIC   Package Cooled:SOP10L   D/C:2000+   

Description: The CD54AC573/3A and CD54ACT573/3A are octal trans- parent three-state latches that utilize the Harris Advanced CMOS Logic technology. The outputs are transparent to the inputs when the Latch Enable (LE) is HIGH. When the Latch Enable (LE) goes LOW, the data is latched. The Output Enable...

Applications: Interrupt A and B (Active-HIGH). These pins provide individual channel interrupts INTA and INTB. INTA and INTB are enabled when MCR[3] is set to a logic 1, interrupt sources are enabled in the interrupt enable register (IER). Interrupt conditions include: receiver errors, available receiver...

Features: • 1.25 (31.75mm) PCB Height • 168-Pin Unbuffered DIMM with Double Sided • One 0.33µF and one 0.1µF decoupling capacitors adopted • ECC support • Serial Presence Detect with Serial EEPROM • Meets all the other JEDEC specifications • Sing...

· UHE1H471MPD

· UTC79D05L0

· UC7173AQP

Vendor:UC   Package Cooled:328   D/C:PLCC28   

Description: Conforms to POCSAG standard for pagers 512 or 1200 bps signal speed Supports tone, numeric or character call messages Battery-saving function for low battery consump- tion BS1 (RF control main output signal) and BS3 (PLL setup signal) 60-step setup time settingfor BS3, 50.8 ms (max) at...

Applications: The UC7173AQP, Atmels latest device in the family of smart internet appliance proces- sors (SIAP), is a high-performance processor designed for professional internet appliance applications such as the Ethernet IP phone. The UC7173AQP is built around an ARM7TDMI microcontroller core running ...

Features: The UC7173AQP is an inexpensive reset generator circuit that monitors power supplies in microprocessor based systems. The function of this device is to assert a reset if either the power supply drops below a designated reset threshold level or /MR is forced low. Several different reset th...

· UPD800256F1417

Vendor:NEC   Package Cooled:05+   D/C:BGA   

· UPD17203GC-549-3BH

Vendor:NEC   Package Cooled:9824+   D/C:QFP   

Description: The maximum allowable power dissipation of any TA (ambient temperature) is (PD(max) = TJ(max) C TA) / JA. Exceeding the maximum allow- able power dissipation will result in excessive die temperature, and the regulator will go into thermal shutdown.

Applications: The DDR SIO operation is possible by supporting DDR read and write operations through separate data output and input ports. Memory bandwidth is higher than DDR sram without separate input output as separate read and write ports eliminate bus turn around cycle.

Features: The UPD17203GC-549-3BH/6658 are low-cost operational amplifiers that operate from a single supply with input voltage range ex- tending below the V−. Based on easy to use voltage feed- back topology and boasting fast slew rate (700V/µs) and high speed (140MHz GBWP), the UPD1720...

· U0805C220JNT

Description: Purpose non inverting input ÎA inverting input ÎA operational amplifier outputÎA) reference voltage output (Vcc/2) unconnected tact input/output. general input of output inable three state data output control outputÿ output of early control control input/output ...

Applications: In-rush current is limited to a programmable value by control- ling the gate drive of an external N-channel FET. The current limit can be controlled by the choice of the sense resistor, RSENSE. Added control of the in-rush current is provided by an on-chip timer that uses pulsewidth modul...

Features: The Hynix U0805C220JNT Series are Dual In-line Memory Modules suitable for easy interchange and addition of 256Mbytes memory. The Hynix U0805C220JNT Series are fully synchronous operation referenced to the positive edge of the clock . All inputs and outputs are synchronized with the rising ed...

· U262P128

Description: The transmitter sections utilize 1310nm Surface Emitting InGaAsP LEDs. These LEDs are packaged in the optical subassembly portion of the transmitter section. A custom silicon IC that converts differential PECL logical signals into an analog LED driving current then drive it.

Applications: The U262P128 monitors the output voltage and generates a PGOOD (power good) signal when soft-start sequence is complete and the output is within regulation. A built-in overvoltage protection circuit prevents the output voltage from going above typically 115% of the set point. Protection from ...

Features: Description Clock input Gate control for Qn outputs. When G is LOW, these outputs are enabled. When G is HIGH, these outputs are asynchronously disabled to the level designated by GL(1). Specifies output disable level. If HIGH, the outputs disable HIGH. If LOW, the outputs disable LOW. C...

· UMK212BJ224MG-T

Vendor:TAIYO   Package Cooled:06+   D/C:321275    

Description: The MP7523/XRD7523s excellent multiplying characteris- tics and low cost allow it to be used in a wide ranging field of ap- plications such as: low noise audio gain control, CRT character generation, motor speed control, digitally controlled attenuators, etc.

Applications: • Automatic Optimization and Mapping Designs are automatically minimized and mapped into the devices for optimal efficiency and high performance. Critical logic functions are automatially assigned to special resources such as high speed clocks and global output enable signals....

Features: C No HSYNC Jitter Anomaly C Negligible Data-Dependent Jitter Programmable Using I2C Serial Interface Monitor Detection Through Hot-Plug and Receiver Detection Single 3.3-V Supply Operation 64-Pin TQFP Using TIs PowerPAD Package TIs Advanced 0.18 µm EPIC-5 CMOS Proces...

· UPD29F032204ALGZ-A85BX-MJH

Vendor:NEC   Package Cooled:0220+(2.4K)/0222+(960PCS)   D/C:0220+   

Description: Important notice: This document contains information of a new product. IC Media Corp reserves the right to make any changes without further notice to any product herein to improve design, function or quality and reliability. No responsibility is assumed by IC Media Corp for its use, nor for...

Applications: Eight edge-triggered D flip-flops Buffered common clock Buffered, asynchronous Master Reset See FCT377 for clock enable version See FCT373 for transparent latch version See FCT374 for TRI-STATE ® version Output sink capability of 32 mA, source capability of 12 mA n TTL input a...

Features: 1 When using a dual speed spindle motor floppy drive (DRVTYP pin low) this output is used to select the spindle motor speed either 300 RPM or 360 RPM In this mode this output goes low when 250 300 kb data rate is chosen in the data rate register and high when 500 kb s is chosen

· UPC2791TB

Vendor:NEC   Package Cooled:SOT363   D/C:2007   

Description: 9. VCC must be applied either coincidentally or before VPP and removed either coincidentally or after VPP. 10. VPP must not be greater than 13 volts including overshoot. During CE = PGM = VIL, VPP must not be switched from 5 volts to 12.5 volts or vice-versa. 11. During power up the PGM p...

Applications: The AP436 is a high-speed controller designed to drive N-channel power MOSFET used as synchronous rectifiers in high current, high frequency fly-back converters. The circuit does not require any ties to the primary side and derives its operating power directly from the secondary. The circuit...

Features: The Hynix UPC2791TB Series are 16Mx72bits ECC Synchronous DRAM Modules. The modules are composed of nine 16Mx8bits CMOS Synchronous DRAMs in 400mil 54pin TSOP-II package, one 2Kbit EEPROM in 8pin TSSOP package on a 168pin glass-epoxy printed circuit board. One 0.22uF and one 0.0022uF decouplin...

· U4224

Vendor:TFK   Package Cooled:N/A   D/C:N/A   

· UPD780023AGK-C36-9ET

Description: Aluminum chassis 17" high brightness TFT color panel display Provides Pentium 4 CPU, OSD function Built-in industrial ATX motherboard, BS-669, 180W power supply VIA VT8751A display controller VIA VT6103 10/100 Based LAN Provides one wireless LAN module AC97 3D audio controller ...

Applications: We designed this receiver based on the idea that if made smaller, GPS receivers could be used in a wide range of applications in ad- dition to in-car navigation sys- tems. In the future, we will be aim- ing for even smaller even lower power receivers. Recently, Ive come to feel even more s...

Features: The UPD780023AGK-C36-9ET shunt regulator is available with three voltage tolerances (0.5%, 1.0% and 2.0%) and three package options (SOT-23-3, TO-92, 8SOIC). This allows the designer the opportunity to select the optimum combination of cost and performance for their application.

· UNA1000LT

Vendor:PHI   Package Cooled:SOP28   D/C:9621+   

· U1343AS/I

· UR132-2.7V

Vendor:UTC   Package Cooled:UTC   D/C:08+   

· UPD789104AMC-543-5A4-E1

Vendor:NEC   Package Cooled:SSOP   D/C:03+   

· ULS2065HMIL

Vendor:ALLEGRO   Package Cooled:DIP   D/C:00+   

· UPD6600AB26

Description: The 6N137, HCPL-2601/2611 single-channel and HCPL-2630/2631 dual-channel optocouplers consist of a 850 nm AlGaAS LED, optically coupled to a very high speed integrated photodetector logic gate with a strobable output. This output features an open collector, thereby permitting wired OR outpu...

Applications: Features International standard packages JEDEC TO-247 AD and TO-268 AA surface mountable For single and three phase bridge configuration Planar passivated chips Epoxy meets UL 94V-0 flammability classification Version AR isolated and UL registered E153432

· UMK107SH100DZ

· UPD78022AGK-C02-9ET

Vendor:NEC   Package Cooled:QFP   D/C:99+   

Description: The HSDL-2300 module consists of Optical Sub-Assemblies (OSAs), an Electrical Sub- Assembly (ESA), and an integrated EMI shield. There are two package options: Option #001 with guide pins, and Option #002 without guide pins. Drawings of the two options package are illustrated in...

Applications: Notes: 1. The luminous intensity, I V, is measured at the peak of the spatial radiation pattern, which may not be aligned with the mechanical axis of the lamp package. 2. The dominant wavelength, ëd, is derived from the CIE Chromatically Diagram and represents the perceived color of ...

Features: Functional Description UPD78022AGK-C02-9ET is designed for very skew critical differential clock distribution systems and supports clock frequencies from DC up to 3.0 GHz. Typical applications for the UPD78022AGK-C02-9ET are primary clock distribution, switching and loopback systems of hig...

· UPW1A220MDD6

· UPD65658GC-H30-7EA

Vendor:NEC   Package Cooled:2000   D/C:1996   

· UN9216J

Description: Assume that a manufacturers company ID value is 006035H and the 24-bit extension identifier is 67ABCDH. The 48-bit node address value generated from these two numbers is 00603567ABCDH, whose byte and bit representations are illustrated in Figure 2.

Applications: Write accesses to the RTICNTR register will clear the CNTR (21 bit counter), which causes a Tap interrupt if the corresponding bit switches from a 1 to a 0 when the suspend signal is asserted. This is the same problem as RTI#3, however, on the initial fix of RTI#3, the case where the suspen...

Features: The High Voltage Subscriber Line IC PEB 4065 is a rugged and reliable interface between the telephone line and the SLICOFI, a low voltage Subscriber Line Interface and Codec Filter IC. It is fabricated in a Smart Power Technology offering a breakthrough voltage of at least 170 V.

· UC17133J

Description: The pre-bias current is controlled by the pin VPRE and can be controlled from 0 mA to 50 mA. The pre-bias current control on pin VPRE is implemented as a current mirror and therefore sinks a cur- rent proportional to the pre-bias current. The current sink into the VPRE pin is ap- proximatel...

Applications: These transceivers are designed for low-voltage (3.3V) VCC applications, but with the capability to provide a TTL interface to a 5V environment. The LVT16543 and LVTH16543 are fabricated with an advanced BiCMOS technology to achieve high speed operation similar to 5V ABT while maintaini...

Features: including SMPTE 292M and SMPTE 259M video applications. It supports signaling rates in the range of 195 to 1500 Mbps per serial link. The transmit and receive channels are independent and can operate simultaneously at different rates. The transmit channel accepts 10-bit parallel characters in...

· U4SBA60

· UPD65431GL-C03

Vendor:NEC   Package Cooled:00+   D/C:112   

Description: The following circuit shows a charged monitor for pro- tection against battery deterioration by overcharging. When the voltage of the battery is higher than the set de- tectable voltage, the transistor turns on to bypass the charge current, protecting the battery from overcharg- ing.

Applications: The MAX8546 has a wide 2.7V to 28V input range, and does not need any additional bias voltage. The output voltage can be precisely regulated from 0.8V to 0.83 x VIN. This devices can provide efficiency up to 95%. Lossless short- circuit and current-limit protection is provided by monitoring the...

Features: NOTE: 1. The device can be destroyed, if the applied voltage or temperature is higher than the absolute maximum rating voltage or temperature. 2. VDD bias must be operated before reset pulse operation. 3. Substrate DC bias(OFD bias) must be operated before horizontal, reset pulse operation.

· U905BAN

Vendor:ST   Package Cooled:QFP-52P   D/C:06+   

· UPG2106TB-E3-A

Vendor:NEC   Package Cooled:SOT-363   D/C:07+   

· UPD8243HCPULLS

Vendor:nec   Package Cooled:nec   D/C:dc95   

Description: * This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operation sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods of time may affect reliability.

Applications: This device is a low-cost, high-speed, JFET-input operational amplifier with very low input offset voltage. It requires low supply current yet maintains a large gain-bandwidth product and a fast slew rate. In addition, the matched high-voltage JFET input provides very low input bias and off...

Features: Note : 1. Icc depends on output load condition when the device is selected, Icc(max) is specified at the output open condition 2. Address can be changed once or less while /RAS=VIL 3. Address can be changed once or less while /CAS=VIH 4. /CAS = L (<=0.2) while /RAS=L (<=0.2) 5. L-Version

Pages: 13/682  At 10 11 12 13 14 15 16 17 18 19 20 Under 10

Quick Search Part No.

Home About Us Map Online Inquiry
© 2009-2011 ExchangeIC.com Corp.All Rights Reserved