Current position: Home > Products > Index 7000
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9 All

· 0.1UF-35V

Vendor:114   Package Cooled:N/A   D/C:N/A   

Description: During turn-off of the lower MOSFET, the LGATE voltage is monitored until it reaches a 1.0V threshold, at which time the UGATE is released to rise. Adaptive shoot-through circuitry monitors the PHASE voltage during UGATE turn-off. Once PHASE has dropped below a threshold of 0.5V, the LGAT...

Applications: NOTES: 1. Measured with outputs open. 2. Refresh period is 64ms. 3. Internal TCSR can be supported(In commercial Temp : Max 40C/Max 70C). 4. 0.1UF-35V-Y(P)C** 5. 0.1UF-35V-Y(P)L** 6. 0.1UF-35V-Y(P)F** 7. Unless otherwise noted, input swing IeveI is CMOS(VIH /VIL=VDDQ/VSSQ).

Features:

· 0.5W10V

Vendor:COS   Package Cooled:DO-35   D/C:07+   

Description: The outstanding Vitesse web managed switch software system that runs on a standard 8051 controller, is provided. This is in addition to the unmanaged and smart managed software systems for 8051, which are also included. For homegrown software development our full switch API is supplied.

Applications: Once fired, the outputs are independent of further transitions of the A and B inputs and are a function of the timing components, or the output pulses can be terminated by the overriding clear. Input pulses can be of any duration relative to the output pulse. Output pulse length can be vari...

Features: The Hynix 0.5W10V Series are Dual In-line Memory Modules suitable for easy interchange and addition of 64Mbytes memory. The Hynix 0.5W10V Series are fully synchronous operation referenced to the positive edge of the clock . All inputs and outputs are synchronized with the rising edge of the c...

· 0.5W110V

Description: Purchase of licensed I2C components of Analog Devices or one of its sublicensed Associated Companies conveys a license for the purchaser under the Philips I2C Patent Rights to use these components in an I2C system, provided that the system conforms to the I2C Standard Specification as defin...

Applications: • Compact disk player (CDP) with tray and changer • Compact disk player (VCD) with tray and changer • Automotive compact disk player (CDP) with tray and changer • Mixing with compact disk player (CDP) and mini disk player (MD) with tray and changer • Other...

Features: The 0.5W110V transmitter converts 28 bits of 3.3 V CMOS/TTL into 4 Low Voltage Differential Signaling (LVDS) data streams while the transmit clock input is transmitted in parallel with the data streams over a fifth LVDS link. The 0.5W110V can be programmed for rising edge or falling edge cloc...

· 0.5W11V

Description: VI TELEFILTERVectron International, Inc. Potsdamer Straße 18267 Lowell Road D 14 513 TELTOW / GermanyHudson, NH 03051 / USA Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: tft@telefilter.comE-Mail: vti@vtinh.com VI TELEFILTER reserves...

Applications: This document is a general product description and is subject to change without notice. Hyundai electronics does not assume any responsibility for use of circuits described. No patent licences are implied Hyundai Semiconductor Rev.00 / Sep.97

Features: It is designed specifically for human interfaces, like control panels, appliances, toys, lighting controls, or anywhere a mechanical switch or button may be found; it may also be used for some material sensing and control applications provided that the presence duration of objects does not e...

· 0.5W120V

Description: also be used independent of the HALT or IDLE modes Each I O pin has software selectable configurations The device operates over a voltage range of 2 5V to 6V High throughput is achieved with an efficient regular instruction set operating at a maximum rate of 1 ms per instruction

Applications: !Features In addition to the features of regular digital transistors. 1) Low saturation voltage, typically VCE (sat) =40mV at IC / IB=50mA / 2.5mA, makes these transistors ideal for muting circuits. 2) These transistors can be used at high current levels, IC=600mA.

Features: Supply Voltage.-0.3V to 6.5V Voltage at any Pin.-0.3V to +Vs +0.3V Input Current at any Pin.5mA Package Input Current.20mA O.S. Output Sink Current.10mA O.S. Output Voltage...6.5V Storage Temperature-65C to +150C Soldering Information, Lead Temperature SOP Package Vapor Phase (60 seconds)...

· 0.5W12V

Vendor:COS   Package Cooled:DO-35   D/C:07+   

Description: Single Read Accesses A read access is initiated when the following conditions are satisfied at clock rise: (1) CEN is asserted LOW, (2) CE1, CE2, and CE3 are ALL asserted active, (3) the Write Enable input signal WE is deasserted HIGH, and (4) ADV/LD is asserted LOW. The address presented to...

Applications: • Layer 2 priority encoding (802.3p) (up to 16 priority queues) • VLAN tagging (IEEE 802.3q) • Flow control (IEEE 802.3x) • Link aggregation (IEEE802.3ad) • Multiple power modes with programmable low power operation • Low power design C 3.3 V/1.8 V, 0.18 ...

Features: drivers to drive either 3.3V or 2.5V output levels while the device logic and the output current drive is always pow- ered from 3.3V. The output drivers also provide individually programmable edge rates and open drain capability. A programmable pullup resistor is provided to tie off un- ...

· 0.5W15V

Vendor:COS   Package Cooled:DO-35   D/C:07+   

Description: 2.5 VDD 6 differential outputs Low skew: 100ps all outputs Selectable positive or negative edge synchronization Tolerant of spread spectrum input clock Synchronous output enable Selectable inputs Input frequency: 4.17MHz to 250MHz Output frequency: 12.5MHz to 250MHz 1.8V / 2.5V LVTTL:...

Applications: The total synthesized voice contents (2.8 sec- onds) can be partitioned into the desired num- ber of sections depending on the size of the ROM table. The length of each section is de- cided by the requirements of the voice con- tents. For example:

Features: Clocks in the ispLSI 1048 device are selected using the Clock Distribution Network. Four dedicated clockpins (Y0, Y1, Y2 and Y3) are brought into the distribution network, and five clock outputs (CLK 0, CLK 1, CLK 2, IOCLK 0 and IOCLK 1) are provided to route clocks to the GLBs and I/O ...

· 0.5W18V

Description: A 5% resistor value is recommended. In the OOK mode, this pin is usually driven with a logic-level data input (unshaped data pulses). OOK modulation is practical for data pulses of 200 µs or longer. In the ASK mode, this pin accepts analog modulation (shaped or unshaped data pulses). ASK...

Applications: Analog-for-the-Digital Age, Application Maestro, dsPICDEM, dsPICDEM.net, dsPICworks, ECAN, ECONOMONITOR, FanSense, FlexROM, fuzzyLAB, In-Circuit Serial Programming, ICSP, ICEPIC, MPASM, MPLIB, MPLINK, MPSIM, PICkit, PICDEM, PICDEM.net, PICLAB, PICtail, PowerCal, PowerInfo, PowerMate, Po...

Features: Chip Select (CS) When CS is high, the 0.5W18V/45 is deselected and the SO output pin is at high impedance and, unless an internal write operation is underway, the 0.5W18V/45 will be in the standby power mode. CS low enables the 0.5W18V/45, placing it in the active power mode. It should ...

· 0.5W19V

Description:

Applications: The SC16C654B/654DB is pin compatible with the ST16C654 and TL16C754 and it will power-up to be functionally equivalent to the 16C454. Programming of control registers enables the added features of the SC16C654B/654DB. Some of these added features are the 64-byte receive and transmit FIFOs,...

Features: Thus when the voltage across the inductor is positive (State 1), the inductor current increases; when the voltage across the inductor is negative (State 2), the inductor current decreases. The net current through the inductor is shown in Figure 2:

· 0.5W2.2V

Description: 1.5 LAN feature set 1 Ethernet 10/100 MII (HPNA compatible) 2 UARTs, Bluetooth compatible Bridging: Transparent bridge: IEEE 801.1d, spanning tree, learning/filter bridge in hardware Embedded router: RIP1, RIP2, static routing NAT/PAT with extended ALG support DHCP server/client...

Applications: Advanced Process Technology Ultra low On-Resistance Provides Higher Efficiency Avalanche Energy Specified Source-to-Drain Diode Recovery Time Comparable to a Discrete Fast Recovery Diode Diode is Characterized for Use in Bridge Circuits IDSS and VDS (on) Specified at Elevated Temperature

Features: These pins switch the ICs operating state from active (S0, S1/S2) to S3 and S4/S5 sleep states. These are digital inputs featuring internal 10µA pull down current sources on each pin. Additional circuitry blocks illegal state transitions, such as S4/S5 to S3. Connect S3# and S5# to the c...

· 0.5W2.4V

Vendor:COS   Package Cooled:DO-35   D/C:07+   

Description: 1. Stresses above those listed under the Absolute Maximum Ratings may cause permanent damage to the device. Functional operation of the device at these or at any other conditions above those indicated in the operational sections of this specifica tion is not implied (while programming, fo...

Applications: The ISL9V2040D3S, ISL9V2040S3S, and ISL9V2040P3 are the next generation ignition IGBTs that offer outstanding SCIS capability in the space saving D-Pak (TO-252), as well as the industry standard D²-Pak (TO-263) and TO-220 plastic packages. This device is intended for use in automotiv...

Features: a. Absolute maximum continuous ratings are those maximum values beyond which damage to the device may occur. Exposure to these conditions or conditions beyond those indicated may adversely affect device reliability. Functional operation under absolute-maximum-rated conditions is not implied.

· 0.5W2.7V

Description: With 1mA load With 1mA load With 20pF maximum load capacitance mea- sured from 10% to 90% of output voltage Output at (VDD -0.3V) Output at 0.3V MCLK can be driven DC-coupled by a CMOS clock oscillator with rail-to-rail out- puts. Other oscillator configurations may require AC-coup...

Applications: Notes: 1. SSSEL has internal pull-up and SSON has pull-down resistors. 2. In applications if a crystal is used for the input reference clock, refer to crystal manufacturers specifications for the required crystal load capacitor value. 3. Parameters are guaranteed by design and characterizat...

Features: • Interfaces directly to a single-scan panel monochrome STN LCD • Interfaces to a single-scan panel color STN LCD with minimal external glue logic • Panel width size is programmable from 32 to 1024 pixels in 16-pixel increments • Video frame buffer size programm...

· 0.5W20V

Description: Resistors R1 and R2 set the nominal Under-Voltage (UV) lockout and Overvoltage (OV) shutdown limits to 84 V and 378 V, respectively. UV lockout protects the supply from overheating at low line and eliminates power-up and power- down glitches. OV shutdown protects the power supply from li...

Applications: The 0.5W20V is the most featured and flexible product for those venders who are looking for USB Keyboard with Hub solution. Besides, vendors can easily modify their board circuits to meet their own requirement if they have product differentiation or cost issues. Further more, if vendor has t...

Features: The 0.5W20V is an Erasable Programmable Logic Device (EPLD) in which CMOS EPROM cells are used to configure logic functions within the device. The MAX® architecture is 100% user-configurable, allowing the devices to accom- modate a variety of independent logic functions.

· 0.5W24V

Description: 24421-009-DTS Rev ADQ# 2009 All technical information is believed to be accurate, but no responsibility is assumed for errors or omissions. Interpoint reserves the right to make changes in products or specifications without notice. HR300 Series is a trademark of Interpoint. Copyright &cop...

Applications: NOTES:- 1. Derate linearly above 70oC free air temperature at a rate of 0.8 mA/C. 2. Derate linearly above 70oC free air temperature at a rate of 1.6 mA/C. 3. Derate linearly above 70oC free air temperature at a rate of 0.9 mW/C. 4. Derate linearly above 70oC free air temperature at a rate...

Features: Depth expansion is possible using the cascade input (XI), cascade output (XO), and First Load (FL) pins. The XO pin is connected to the XI pin of the next device, and the XO pin of the last device should be connected to the XI pin of the first device. The FL pin of the first device is tie...

· 0.5W27V

Vendor:COS   Package Cooled:DO-35   D/C:07+   

Description: Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: Defense Supply Center, Columbus, ATTN: DSCC-VAC, P.O. Box 3990, Columbus, OH 43216-5000, by using the Standardization Document Improvement ...

Applications: The 0.5W27VA/0.5W27V75A/0.5W27V76A ensure that the output voltage does not swing negative when the input power is removed or when EN is driven low. The 0.5W27V75A/0.5W27V76A also allow prebias startup with- out discharging the output. The 0.5W27VA/0.5W27V75A/0.5W27V76A are available in a 24-...

Features: The 0.5W27V requires two power inputs. One input is employed to power the LCD electronics and to drive the voltages to drive the TFT array and liquid crystal. And the second input for the backlight CCFL, is typically generated by an inverter. The inverter is an external unit to the LCD.

· 0.5W3.1V

Description: 660 mW (Military) Synchronous and asynchronous output enables On-chip edge-triggered registers Buffered common PRESET and CLEAR inputs EPROM technology, 100% programmable Slim 300-mil, 24-pin plastic or hermetic DIP, 28-pin LCC, or 28-pin PLCC 5V 10% VCC, commercial and military TTL-com...

Applications: 128K x 36, 256K x 18 memory configurations Supports high performance system speed - 150 MHz (3.8 ns Clock-to-Data Access) ZBTTM Feature - No dead cycles between write and read cycles Internally synchronized output buffer enable eliminates the need to control OE Single R/W (READ/WRITE) contr...

Features: The hardware RESET# pin terminates any operation in progress and resets the device, after which it is then ready for a new operation. The RESET# pin may be tied to the system reset circuitry. A system reset would thus also reset the device, enabling the host system to read boot-up firmwa...

· 0.5W3.9V

Vendor:COS   Package Cooled:DO-35   D/C:07+   

Description: Figure 12 shows a dual-trace photograph of a triangular signal being sampled-and-held for approximately 14ms with a 300pF storage capacitor. The center trace (expanded to 20mV/Div.) shows the worst-case tilt for all the steps shown in the upper trace. The total equivalent leakage current...

Applications: The FAN7382 is a monolithic half-bridge gate driver IC for driving MOSFETs and IGBTs, which operate up to +600V. Fairchilds high voltage process and common-mode noise canceling technique give stable operation of high-side driver under high dv/dt noise circumstances. Advanced level shift ...

Features: SIZEB determines the bus width of Port B. A HIGH on this pin selects byte (9-bit) bus size. A LOW on this pin selects word (18-bit) bus size. SIZEB works with SIZEC and BE to select the bus size and endian arrangement for ports B and C. The level of SIZEB must be static throughout device opera...

· 0.5W33V

Description: Hynix HYMP512S64MP8 series is designed for high speed and offers fully synchronous operations referenced to both rising and falling edges of differential clock inputs. While all addresses and control inputs are latched on the rising edges of the clock, Data, Data strobes and Write data masks i...

Applications: DATA BUS: The Data Bus lines are bidirectional three-state signals connected to the system data bus. The outputs are enabled in the Program condition during the I/O Read to output the contents of a register to the CPU. The outputs are disabled and the inputs are read during an I/O Write cyc...

Features: The TMS320C62x DSP offers cost-effective solutions to high-performance DSP programming challenges. The 0.5W33VB/03 has a performance of up to 2400 million instructions per second (MIPS) at 300 MHz, while the 0.5W33V has a performance of up to 2000 MIPS at 250 MHz, and the 0.5W33V has a per...

· 0.5W4.3V

Vendor:COS   Package Cooled:DO-35   D/C:07+   

Description: Reduced parts count and high efficiency add to the reliability of the HPR10XX Series. The high efficiency of the HPR10XX Series means less internal power dissipation, as low as 190mW. With reduced heat dissipation the HPR10XX Series can oper- ate at higher temperatures with no degradation...

Applications: Four dedicated test pins control the operation of the test circuitry: test data input (TDI), test data output (TDO), test mode select (TMS), and test clock (TCK). Additionally, the test circuitry performs other testing functions such as parallel-signature analysis (PSA) on data inputs and p...

Features: NOTES 1Temperature range is as follows: B Version: C40C to +85C. 2Typical values are at 25C, unless otherwise stated. 3Guaranteed by design, not subject to production test. 4The digital switch contributes no propagation delay other than the RC delay of the typical R ON of the switch and th...

· 0.5W4.7V

Vendor:COS   Package Cooled:DO-35   D/C:07+   

Description: All digital clocks generate unwanted energy in their harmonics. Conventional digital clocks are square waves with a duty cycle that is very close to 50%. Because of this 50/50 duty cycle, digital clocks generate most of their harmonic energy in the odd harmonics, i.e., third, fifth, seven...

Applications: The 0.5W4.7V is an advanced CMOS dualCindependent DPDT (double poleCdouble throw) analog switch, fabricated with silicon gate CMOS technology. It achieves highCspeed propagation delays and low ON resistances while maintaining CMOS lowCpower dissipation. This DPDT controls analog and digi...

Features: The radiation hardened 0.5W4.7VRH is a low dropout adjustable negative regulator with an output voltage range of -2.25V to -26V. The device features a 1A output current capability, an adjustable current limit pin (ILIM) and a shutdown pin (SD) for easy on/off control.

· 0.5W5.1V

Vendor:COS   Package Cooled:DO-35   D/C:07+   

Description: The Am29BDS643 is a 64 Mbit, 1.8 Volt-only, simulta- neous Read/Write, Burst Mode Flash memory device, organized as 4,194,304 words of 16 bits each. This device uses a single VCC of 1.7 to 1.9 V to read, pro- gram, and erase the memory array. A 12.0-volt V PP may be used for faster prog...

Applications: This is the drain-source resistance at 25C with VGS = 10V. Since RDS(on) is temperature-dependent, it is important to minimize heating of the junction during the test. A pulse test is therefore used to measure this parameter. The test is set up in the following manner:

Features: Additional amplifiers are used in the 0.5W5.1V to provide the necessary control loop compensation for extended bandwidth. By extending the bandwidth of the direct duty cycle control system, torque pertubations can be accounted for while regulating the speed of the motor. This allows the mod...

· 0.5W5.6V

Vendor:COS   Package Cooled:DO-35   D/C:07+   

Description: Note 8: CIN, COUT, C1, and C2: Low-ESR Surface-Mount Ceramic Capacitors (MLCCs) used in setting electrical characteristics. Note 9: Output resistance is a model for the voltage drop at the output, resulting from internal switch resistance, capacitor ESR, and charge pump charge transfer chara...

Applications:

Features: The 0.5W5.6V includes a PCI bus interface and a codec. It also includes ADC and DAC conversion of modem/voice signal data and provide the interface and control logic needed to transfer data between its serial I/O terminals and the PCI interface. The 0.5W5.6V ADC and DAC operate synchronously s...

· 0.5W6.2V

Vendor:COS   Package Cooled:DO-35   D/C:07+   

Description: Data transfer may be initiated only when the bus is not busy. During data transfer, the data line must remain stable whenever the clock line is high. Changes in data line while the clock line is high will be interpreted as a START or STOP condition.

Applications: See Distribution of Differential Output Offset (Worst-Case Conditions) in the Typical Operating Characteristics. Characterized with a 675Mbps 1-0 pattern. Measurements are taken over an input signal range of 16dB. Deterministic jitter is defined as the arithmetic sum of PWD (pulse-width disto...

Features: The 0.5W6.2V is a low cost, high quality, 16-bit succes- sive approximation analog-to-digital converter. It uses laser-trimmed ICs and is packaged in a convenient 32-pin hermetic ceramic dual-in-line package. The converter is complete with internal reference, clock, comparator, and thin-...

· 0.5W8.2V

Vendor:COS   Package Cooled:DO-35   D/C:07+   

Description: • Well Defined Spatial Radiation Patterns • Viewing Angles: 6, 15, 23, 30 • High Luminous Output • Colors: 590 nm Amber 605 nm Orange 615 nm Reddish-Orange 626 nm Red • High Operating Temperature: TJ LED = +130C • Superior Resistance to Mo...

Applications: Ground pin. Complimentary clock of differential pair CPU outputs. These are current mode outputs. External resistors are required for voltage bias. True clock of differential pair CPU outputs. These are current mode outputs. External resistors are required for voltage bias. Supply for CP...

Features: The 0.5W8.2V is available in a 100-lead LQFP package and a 144-Ball Mini-BGA package. In order to maintain maxi- mum functionality and reduce package size and pin count, some serial port, programmable flag, interrupt and external bus pins have dual, multiplexed functionality. The external...

· 0.5W9.1V

Vendor:COS   Package Cooled:DO35   D/C:07+   

Description: These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Winbond customers using or selling these products for use in such applications do so at their own risk and agre...

Applications: The TPS758xx family of 3-A low dropout (LDO) regulators contains four fixed voltage option regu- lators and an adjustable voltage option regulator. These devices are capable of supplying 3 A of output current with a dropout of 150 mV (TPS75833). Therefore, the device is capable of perfo...

Features: The 0.5W9.1V GaAs Power Amplifier MMIC has been especially developed for wireless applications in the 2.4 - 2.5 GHz ISM band (e.g. Bluetooth class 1). Its high power added efficiency and single positive sup- ply operation makes the device ideally suited to handheld applications. The device de...

· 0.68UH

Vendor:N/A   Package Cooled:03+   D/C:N/A   

Description: Turn-On Time: In the circuit of Figure 1, turning Q1 on applies a low voltage to the STBY control (pin 3) and disables the regulator ouput. Correspondingly, turning Q1 off removes the low-voltage signal and enables the output. Once enabled, the output will typically experience a 10C15ms de...

Applications: The electronic switches on the device operate in a make before break mode when the wiper changes tap positions. If the wiper is moved several positions, multiple taps are connected to the wiper for tIW (INC to VW change). The RTOTAL value for the device can tem- porarily be reduced by a...

Features: The 0.68UH is a timing controller that combines an LVDS single pixel input interface with Nationals Reduced Swing Differential Signaling (RSDS™) output driver interface for (SVGA) XGA and Wide XGA resolutions. It resides on the TFT-LCD panel and provides the data buffering and contr...

· 0001-003-01

Vendor:TELENEX   Package Cooled:PLCC   D/C:99   

Description: In operation, the HCPL-7860/ HCPL-786J Isolated Modulator (optocoupler with 3750 VRMS dielectric withstand voltage rating) converts a low- bandwidth analog input into a high-speed one-bit data stream by means of a Sigma-Delta (− ∆) over-sampling modulator. This modulation prov...

Applications: - Removed all references to XCLKS, since function is removed. - typo - replaced PRU with RPU. - typo - replaced ATAHC with ATA5HC - Removed references to clock monitor, since function is not available. - Update JA for 100-pin and 64-pin packages. - Add footnotes on IRQ pin removal in 6...

Features: MUTE Operation The MUTE input is active high. Whenever the input is low, the VOUT will reflect the value in the data register. If MUTE is driven high the VOUT outputs will be switched to VREFL. Releasing the MUTE input returns the VOUT outputs to the analog equivalent of the data registe...

· 0-002

Description: The HYM532810C M-Series is a 8Mx32-bit Fast Page mode CMOS DRAM module consisting of sixteen HY5117400C in 24/26 pin SOJ on a 72 pin glass-epoxy printed circuit board. 0.1µF and 0.01µF decoupling capacitors are mounted for each DRAM. The HYM532810CM is Tin plated and HYM532810CMG ...

Applications: Tiny SOT−353 and SOT−553 Packages Extremely High Speed: tPD 2.5 ns (typical) at VCC = 5.0 V Designed for 1.65 V to 5.5 V VCC Operation, CMOS Compatible Over Voltage Tolerant Inputs VIN may be Between 0 and 7.0 V for VCC Between 0.5 and 5.4 V TTL Compatible − Interface Capabi...

Features: These amplifiers have a 360-µV input offset voltage, a 17 nV/Hz input noise voltage, and a 2-pA input bias current for measurement, medical, and industrial applications. The TLV277x family is also specified across an extended temperature range (C40C to 125C), making it useful for auto...

· 000-6181-37R

Description: This combination of excellent dc performance with a common-mode input voltage range that includes the negative rail makes these devices the ideal choice for low-level signal conditioning applications in either single-supply or split-supply configurations. In addition, these devices offer ph...

Applications: 96 Outputs Plasma Display Driver 90V Absolute Maximum Rating Reduced EMI (Electro Magnetic Interference) 3.3V / 5V Compatible Logic -40 / 30 mA Source / Sink Output Mos 6 Bit Data Bus (40 MHz) BCD Process Packaging Adapted to Customer Request (DICE, COB, COF, TAB).

Features: Low-power operation makes the 000-6181-37R ideal for bat- tery-operated systems, such as personal digital assis- tants with resistive touch screens and other portable equipment. The 000-6181-37R is available in 16-pin QSOP and TSSOP packages, and is guaranteed over the -40C to +85C temperatur...

· 000-7044-37R

Description: RAMP: A resistor (R4) from RAMP to the input voltage and a capacitor (CR) from RAMP to GND programs the feedforward ramp signal. RAMP is discharged to GND when CLK is high and allowed to charge when CLK is low. RAMP is the line feedforward sawtooth signal for the PWM comparator. Assuming...

Applications: 3: Regulation is measured at a constant junction temperature using low duty cycle pulse testing. Load regulation is tested over a load range from 0.1 mA to the maximum specified output current. Changes in output voltage due to heating effects are covered by the thermal regulation specific...

Features: CAUTION ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on the human body and test equipment and can discharge without detection. Although the 000-7044-37R features proprietary ESD protection circuitry, permanent damage may occur on ...

· 000-7093-37R

Vendor:1607   Package Cooled:MIDCOM   D/C:03+   

Description: Several register bits (bit 0 to bit 93) are used to control circuit operation and to adapt certain circuit parameters to the specific application. The control bits are organized in two 8-bit and three 24-bit registers that can be programmed by the 3-wire bus protocol. The bus protocol and t...

Applications: Specifications shown in boldface are tested on all production units at final electrical test. Results from those tests are used to calculate outgoing quality levels. All min and max specifications are guaranteed, although only those shown in boldface are tested on all production units.

Features: A basic, two-dimensional 000-7093-37R-based system is shown in Figure 2. In this typical arrangement, two Image Manipulation Sequencers process the image. 000-7093-37Rhe only other components needed beyond the source and target image buffer memories are a multiplier-accumulator or pixel in...

· 000-7113-31R

Vendor:MIDCOM   Package Cooled:SMD   D/C:01+   

Description: This document contains ADVANCE INFORMATION. ISSI reserves the right to make changes to its products at any time without notice in order to improve design and supply the best possible product. We assume no responsibility for any errors which may appear in this publication. © Copyright 199...

Applications: DigitalClarity™ Image Sensor Technology High frame rate Global Reset Release Horizontal and vertical binning Column and row skip modes Superior low-light performance Low dark current Simple two-wire serial interface Programmable Controls: Gain, frame rate, frame size, exp...

Features: The 000-7113-31R is a bipolar integrated circuit for use in mono portable and pocket radios. It is used when a minimum of perpheral components (of small dimensions and low costs) is important. The circuit contains a frequency-locked-loop(FLL) system with an intermediate frequency(IF) of a...

· 0010603-2

Description: NOTES: 1. Dimensions are in inches. Lead 1 is emitter, lead 2 is base, and lead 3 is collector. 2. Metric equivalents are given for general information only. 3. Symbol TL is measured from HD maximum. 4. Details of outline in this zone are optional. 5. Leads at gauge plane .054 +.001 ...

Applications: • Low power consumption: STANDBY - 72 µW max at 3.6V - 41 µW max at 2.7V • 1.2V data retention • Equal access and cycle times • Easy memory expansion with CS, OE inputs • Smallest footprint packages - 48-ball FBGA - 400-mil 44-pin TSOP II ...

Features: The 0010603-2USB is an 8 port USB hub with 1 upstream port and 7 downstream ports. It uses an 8-bit RISC-like uC to encode/decode the host commands. The 0010603-2USB is designed mainly for stand-alone hub and can also be integrated in PC mo therboard or any other devices to support USB hub f...

· 0018412BV01

Vendor:N/A   Package Cooled:module   D/C:N/A   

Description: Ring Indicator (Active-LOW). These inputs are associated with individual UART channels, A and B. A logic 0 on these pins indicates the modem has received a ringing signal from the telephone line. A LOW-to-HIGH transition on these input pins generates a modem status interrupt, if enabled. Th...

Applications: This document states the current technical specifications regarding the Spansion product(s) described herein. Spansion LLC deems the products to have been in sufficient production volume such that subsequent versions of this document are not expected to change. However, typographical or spec...

Features: Parameter Supply Voltage (VCC to GND) Internal Power Dissipation Output Short Circuit Duration Maximum Input Current Storage Temperature Range Operating Ambient Temperature Range Maximum Junction Temperature Die Attach Temperature (<60 seconds)

· 0018413BV02

Vendor:N/A   Package Cooled:module   D/C:N/A   

Description: To program the offset values, PEN can be brought low after reset. On the following low-to-high transition of LDCK, the binary value on D0CD7 is stored as the almost-empty offset value (X) and the almost-full offset value (Y). Holding PEN low for another low-to-high transition of LDCK reprog...

Applications: Microcontroller architecture Memory mapping SFR mapping Microcontroller interrupts Interface to DSP Interface to Real-Time Clock (RTC) Interface to the Memory Control Block (MCB) The test registers CDTRx, PMTRx and TCTRL Interface to Timing and Control Block (TICB) Power and Inter...

Features: The 0018413BV02 firmware implements a multitasking host adapter that provides the host system with IP communications, complete SCSI command and data transport capabilities, and VI communications, thus freeing the host system from simultaneous execution of SCSI, IP, and VI traffic. The ...

· 00198110AO

Vendor:MOT   Package Cooled:N/A   D/C:09+   

Description:

Applications: OFFSET VOLTAGE, initial OFFSET VOLTAGE, vs. temperature OFFSET VOLTAGE, vs. supply OFFSET VOLTAGE, vs. power BIAS CURRENT, initial BIAS CURRENT, vs. temperature BIAS CURRENT, vs. supply OFFSET CURRENT, initial OFFSET CURRENT, vs. temperature INPUT IMPEDANCE, DC INPUT CAPACITANC...

Features: *1: Is1 is specified as the 5% drop point of output voltage VO on the condition that VIN = 3.3 V (5 V for 00198110AO, 6 V for 00198110AO), and IO = 10 mA. *2: Output is OFF when the output control pin (VC pin) is open. Each input level is equivalent to that for LS-TTL. Therefore, the device...

· 00199400AO

Vendor:TEMIC   Package Cooled:N/A   D/C:09+   

Description: Entering SIMD mode also has an effect on the way data is trans- ferred between memory and the processing elements. When in SIMD mode, twice the data bandwidth is required to sustain computational operation in the processing elements. Because of this requirement, entering SIMD mode also do...

Applications: This protection function is splitted in 2 stages. As shown in Figure A3, the ESD strikes are clamped by the first stage S1 and then its remaining overvoltage is applied to the second stage through the resistor R. Such a configuration makes the output voltage very low at the Vout level.

Features: The 00199400AO is a high sensitive and low dark current 128−elements linear image sensor which includes CCD drive circuit, clamp circuit and sample & hold circuit. The CCD drive circuit consists of the pulse generator therefore it is possible to easy drive by applying simple pul...

· 002-10

Vendor:N/A   Package Cooled:BGA   D/C:01   

Description: Silicon chip on Direct-Copper-Bond substrate - High power dissipation - Isolated mounting surface - 2500V electrical isolation Low cathode to tab capacitance (<25pF) International standard package Planar passivated chips Very short recovery time Extremely low switching losses ...

Applications: The SST39VF160Q/VF160 also have the Auto Low Power mode which puts the device in a near standby mode after data has been accessed with a valid read operation. This reduces the IDD active read current from typically 15 mA to typically 3 µA. The Auto Low Power mode reduces the typical...

Features: Port 0 (AD0C7), I/O. Port 0 is an open-drain, 8-bit, bidirectional I/O port. As an alternate function Port 0 can function as the multiplexed address/data bus to access off-chip memory. During the time when ALE is high, the LSB of a memory address is presented. When ALE falls to a logic 0,...

· 0021A

Vendor:110   Package Cooled:PHILIPS   D/C:00+   

Description: This demonstration board is a two layer PCB. It uses a ground plane on the bottom and signal and power traces on the top. The ground plane has been opened up around op amp pins sensitive to capacitive loading. Power supply traces are laid out to keep current loop areas to a minimum. The ...

Applications: 1 mega pixels (1152x864) format, used with 1/2 optical system Support sub-sampling at quarter (1/4) mega pixel resolution for higher video frame rate Progressive readout Output data format: 10-bit raw data Input interface: SIF Electronic exposure control On-chip 11-bit ADC On-chip P...

Features: The circuit diagram used in the temperature display application is shown in figure 1. Apart from the MCU itself, two chips are required to facilitate a simple LIN node. These are the LIN interface, in this case the MC33399 and a 5 volt regulator. These chips will be replaced in the future b...

· 002-20

Vendor:N/A   Package Cooled:BGA   D/C:00   

Description: DISP high disables the LED display. DISP tied to VCC allows PROGX to connect directly to VCC or VSS instead of through a pull-up or pull-down resistor. DISP floating allows the LED display to be active during charge. DISP low activates the display. See Table 1.

Applications: 3V to 3.6V operating voltage 50MHz to 160MHz output frequency range Input from fundamental crystal oscillator or external source Internal PLL feedback (loading feedback output relative to other outputs, adjusts propagation delay between REF inputs and outputs) Select inputs (S[1:0]) for...

Features: Default Modes 002-20 always powers up in a known state. 002-20 power up default conditions are: 1. Comparator mode 2. TOS set to 50C for 002-20-1, to 80C for 002-20-2 3. THYST set to 45C for 002-20-1, to 75C for 002-20-2 4. O.S. active low 5. Pointer set to 00; Temperature Register With ...

· 0022063LJP

Description: HOLD: The HOLD pin is used in conjunction with the CS pin to select the AT25080A/160A/320A/640A. When the device is selected and a serial sequence is underway, HOLD can be used to pause the serial communication with the master device without resetting the serial sequence. To pause, the HOLD...

Applications: Using the latest high voltage technology based on a patented strip layout, STMicroelectronics has designed an advanced family of IGBTs, the PowerMESH™ IGBTs, with outstanding performances. The built in collector-gate zener exhibits a very precise active clamping while the gate-em...

Features: † NOTICE: Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only and functional operation of the device at those or any other conditions above those indicated in the operational listings of this specification i...

· 0025-005

Vendor:NS   Package Cooled:SMD   D/C:08+   

Description: The 12140 is a high speed digital circuit used as a phase comparator in an analog phase-locked loop. The device determines the lead or lag phase relationship and time difference between the leading edges of a VCO (V) signal and a Reference (R) input. Since these edges occur only once pe...

Applications: NMOS open drain output structure, which by receiving the HKS and HFO signals, control the dialer so as to connect or disconnect the telephone line. PO is pulled to VSS when HKS is high (on-hook) and HFO is low. PO is an open circuit which make the line connection when HKS is low (off-hook) or...

Features: The 0025-005/0025-005/0025-005 resistance is con- stant over temperature. The typical temperature coeffi- cient of resistance is 150ppm/C. Over a -40C to +85C range centered at +25C, this would be a 1% change in resistance. The initial accuracy at room tem- perature is 1.5%. This provides imp...

· 0027SB002

Description: Notes: 7. Test conditions assume signal transition time of 3 ns or less, timing reference levels of VCC(typ)/2, input pulse levels of 0 to VCC(typ), and output loading of the specified IOL/IOH and 30-pF load capacitance. 8. At any given temperature and voltage condition, tHZCE is less tha...

Applications:

Features: Upon the detection of power (UVLO), thermal, or short-circuit faults, the 0027SB002 is forced into an idle state where the SS and COMP pins are pulled low and both switches are held off. In the event of UVLO fault, the 0027SB002 remains in this idle state until the UVLO fault is removed...

· 002A

Description: The digital visual interface (DVI) specification is an industry standard developed by the digital display working group (DDWG) for high-speed digital connection to digital displays. The TFP513 is compliant to the digital visual interface (DVI) Revision 1.0 specification. The DVI 1.0 specifi...

Applications: Transmit Data Input. Serial data for transmission is input on this pin. In Synchronous modes, the data must be valid on the rising edge of the TXCLK clock. In Asynchronous modes (2400/1200/600 bit/s, or 75/300 baud) no clocking is necessary. DPSK/QAM data must be +1%, -2.5% or +2.3%, -2.5 % in ...

Features: Hynix HYMD264G726(L)4-K/H/L series is registered 184-pin double data rate Synchronous DRAM Dual In-Line Mem- ory Modules (DIMMs) which are organized as 64Mx72 high-speed memory arrays. Hynix HYMD264G726(L)4-K/H/L series consists of eighteen 64Mx4 DDR SDRAM in 400mil TSOP II packages on a 184p...

· 003-10

Vendor:N/A   Package Cooled:BGA   D/C:01   

Description: A sense FET monitors the current supplied to the load. The sense FET measures current more efficiently than conventional resistance methods. When an overload or short circuit is encountered, the current-sense circuitry sends a control signal to the driver. The driver, in turn, reduces the g...

Applications: Analog signals should be inputted through AIL and AIR pins. The signals that have been processed by the stereo dipole (SD) are outputted from LOUT and ROUT pins respectively. Add an analog filter circuit, an example of which is shown later in this document.

Features: The 003-10 extended wake-up support complements the ACPI controller in the chipset. The System Wake-Up Control (SWC) module, powered by VSB3, supports a flexible wake- up mechanism. There are 13 General-Purpose Input/Output (GPIO) ports; these allow system control and wake-up on system e...

· 003-20

Vendor:N/A   Package Cooled:BGA   D/C:01   

Description: The ATA6 66 1 is a fu lly int egrat ed LIN tran sce iver acc or din g to th e L IN specification 2.0. It interfaces the LIN protocol handler and the physical layer. The device is designed to handle the low-speed data communication in vehicles, e.g., in convenience electronics. Improved slop...

Applications:

Features: What is the 003-20? The 003-20 is Linear Dimensions version of the popular 003-20 series negative voltage low dropout regulator family. These devices offer voltage regulation at extremely low cost. The devices are particularly useful in applications such as wall adaptors, toys, or wall plugg...

· 003235C

Description: The PT6700 is a new series of high-performance, 13 Amp Integrated Switching Regulators (ISRs) housed in a unique, space-saving 23-pin SIP package. The 13A capability allows easy integration of the latest high- speed, low-voltage µPs and bus drivers into existing 5V systems. ...

Applications: † Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating conditions is not implied. E...

Features: The carry look-ahead circuitry provides for cascading counters for n-bit synchronous applications without additional gating. ENP, ENT, and a ripple-carry output (RCO) are instrumental in accomplishing this function. Both ENP and ENT must be high to count, and ENT is fed forward to enable RC...

· 003-30

Vendor:N/A   Package Cooled:BGA   D/C:01   

Description: The UCC3813-0/-1/-2/-3/-4/-5 family offers a variety of package options, temperature range options, choice of maximum duty cycle, and choice of critical voltage levels. Lower reference parts such as the UCC3813-3 and UCC3813-5 fit best into battery operated systems, while the higher refere...

Applications: Notes a: Stresses greater than those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only, and functional operation of the device at con- ditions above those indicated in the operational sections of this specification is not implied....

Features: In our example the amplifier application requires the output to drive a 20 volt peak sine wave across a 5 ohm load for 4 amps of output current. For a worst case analysis we will treat the 4 amps peak output current as a D.C. output current. The power supplies are 35 VDC.

· 0033SB

Description: The SPI protocol is controlled by op-codes. These op-codes specify the commands to the part. After /CS is activated, the first byte transferred from the bus master is the op-code. Following the op-code, any addresses and data are then transferred. Certain op- codes are commands with no ...

Applications: optimized for use in many industrial and com- mercial applications where low power and low voltage operation are essential. By popular mi- crocontroller, the versatile serial interface in- cluding chip select (CS), serial clock (SK), data input (DI) and data output (DO) can be easily control...

Features: The inputs to the PIM consist of all I/O and dedicated input pins and all macrocell feedbacks from within the logic blocks. The number of PIM inputs increases with pin count and the number of logic blocks. The outputs from the PIM are signals routed to the appropriate logic blocks. Each l...

· 003636//7905-09FTB15N2N6RL//DE-9SZ-T1

Vendor:16   Package Cooled:N/A   D/C:N/A   

Description:

Applications: When the CMI/ECL pin is low the chip is in ECL mode and a fiber optics transceiver is used. The output data signal from the pins ECLOUTP and ECLOUTN have PECL levels. In this mode, the CMI pins are inoperative and should be left open. The CMI encoder and decoder are disabled.

Features: The 003636//7905-09FTB15N2N6RL//DE-9SZ-T1 outputs settle to 0.1% within 35 ns into a 300 pF load (6 V swing). The 003636//7905-09FTB15N2N6RL//DE-9SZ-T1 can run on both +5 V as well as 12 V rails. Slew rate on 12 V supplies is 2400 V/µs. DC Characteristics are outstanding with typical...

· 0050-8064A

Description: VCORE+ VCORE Output Sense. Differential sensing of the output voltage. Used for regulation as VCOREC well as PGOOD, under-voltage and over-voltage protection and monitoring. A resistor in series with this VCORE+ sets the output voltage droop.

Applications: CLKA/CLKB (Pins 5, 16): Card Socket. The CLKA/CLKB pins should be connected to the CLK pins of the respective card sockets. The CLKA/CLKB signals are derived from the CLKIN pin. They provide a level shifted CLKIN signal to the selected card. The CLKA/CLKB pins are gated off until VCCA/VCCB at...

Features: The 0050-8064A, 0050-8064A, 0050-8064A, 0050-8064A, and 0050-8064A are current feedback amplifiers with a bandwidth of 200MHz and operate from just 0.75mA supply current. This makes these amplifiers ideal for todays high speed video and monitor applications.

· 0050-8115A

Vendor:300   Package Cooled:COHERENT   D/C:PLCC44   

Description: Vo1/Vo2 Loading The output voltages from the 0050-8115A series regulators are independently regulated. The voltage at Vo1 is produced by a highly efficient switching regulator. The lower output voltage, Vo2, is derived from Vo1. The regulation method used for Vo 2 also provides control of ...

Applications: Note: 1. These are the recommended and tested operating conditions. Proper device operation outside of these conditions is not guaranteed. 2. This voltage is the input to the filter discussed in 0050-8115A RISC 0050-8115Aicroprocessor Hardware Specifications, Section 1.9.2, PLL Power Su...

Features: 1.1 Program Memory Organization The TLC154/155 have a 9-bit Program Counter (PC) capable of addressing a 51213 program memory space. The TLC156 have a 10-bit Program Counter capable of addressing a 1K13 program memory space. The TLC157 have an 11-bit Program Counter capable of addressing a 2K...

· 0050-8345A

Vendor:LSI   Package Cooled:N/A   D/C:09+   

Description: Note 1 Output matching is calculated as the percent variation (IMAX a IMIN) 2 Note 2 With a fixed resistor on the brightness input pin some variation in brightness will occur from one device to another Maximum brightness input current can be 2 mA as long as Note 3 and junction temperature eq...

Applications: Figure 5 shows the power curves for a power amplifier with 40V supplies and an 8Ω resistive load. Again, powers are plotted with respect to the percentage of maximum voltage output. As with dc, the power delivered from the power supply increases linearly with output voltage and the ...

Features: The #RESET input pin can be used in some application. When #RESET pin is at high state, the device is in normal operation mode. When #RESET pin is at low state, it will halt the device and all outputs will be at high impedance state. As the high state re-asserted to the #RESET pin, the device...

· 005BB

Vendor:PHILIPS   Package Cooled:DIP8   D/C:00+   

Description: NTSC, PAL and SECAM composite video standards are interlaced video schemes and therefore have odd and even fields. For odd fields, the first broad vertical sync pulse is coincident with the start of horizontal, while for even fields, the first broad vertical sync pulse starts in the middle of ...

Applications: The LTC®3704 is a wide input range, current mode, positive-to-negative DC/DC controller that drives an N-channel power MOSFET and requires very few external components. Intended for low to high power applications, it eliminates the need for a current sense resistor by utilizing the power ...

Features: The CD54AC280/3A and CD54ACT280/3A are 9-bit odd/ even parity generator/checkers that utilize the Harris Advanced CMOS Logic technology. Both even and odd par- ity outputs are available for checking or generating parity words up to nine bits long. Even parity is indicated (E out- put is ...

· 006-1012868

Vendor:NCR   Package Cooled:N/A   D/C:09+   

Description:

Applications: Power Dissipation and Thermal Characteristics Maximum Power Dissipation Case 751(SOC8) D Suffix Thermal Resistance, JunctionCtoCAmbient Thermal Resistance, JunctionCtoCCase Case 369A (DPAK) DT Suffix [Note 1] Thermal Resistance, JunctionCtoCAmbient Thermal Resistance, JunctionCtoCC...

Features: The 006-1012868Cprovides the complete conversion function for a 0.75hp (0.56kW) variable frequency, variable voltage, AC motor controller. The combines a power module 006-1012868A with a Driver-Plus Board 006-1012868D. Figure 1 shows the block diagram of the within an AC motor control...

· 006-1085998

Vendor:NCR   Package Cooled:N/A   D/C:09+   

Description: To determine if an errata sheet exists for a particular device, please check with one of the following: • Microchips Worldwide Web site; http://www.microchip.com • Your local Microchip sales office (see last page) • The Microchip Corporate Literature Center; U.S. FAX: (480...

Applications: 96 Outputs Plasma Display Driver 95V Absolute Maximum Rating Reduced EMI (Electro Magnetic Interference) 3.3 V/ 5V Compatible Logic -40 / 30mA Source / Sink Output Mos 3 or 6 Bit Data Bus (40MHz) BCD Process Packaging Adapted to Customer Request (DICE, COB, COF, TAB).

Features: SPI communication is a point-to-point or point-to-multi-point interface that can be configured as master/slave, single- master/multiple-slaves or multiple-masters/single-slave. The master initiates all communication between slave and master. The master drives the SPSCK signal, which is a clock...

· 006-1086006

Vendor:NSC   Package Cooled:68 PLCC   D/C:2006   

Description: Supports PIO mode 4, both at 16.6 Mbytes/second theoretically Sustained write : max 1.5 Mbytes/second (8MB to 48MB), 3.2 Mbytes/second (64MB to 512MB) Sustained read : max 6.5Mbytes/second Single +5 Volt or 3.3 Volt power supply and very low power consumption with automatic power management.

Applications: The clock generator consists essentially of a PLL which generates the internal and exported system clocks from input clock LL3 or LL1.5 and synchronizes them with the horizontal blanking signal. The MSC can be set to one of the two input frequencies via input LLSEL. For the possible use of...

Features: Baud out. BAUDOUT is a 16 clock signal for the transmitter section of the UART. The clock rate is established by the reference oscillator frequency divided by a divisor specified in the baud generator divisor latches. BAUDOUT may also be used for the receiver section by tying this ou...

· 006-1086007

Vendor:LSI   Package Cooled:PQFP-100   D/C:99   

Description: reconstruction filters Separate analog (5V) and digital (3.3V with 5V-tolerant input pads) power supplies Internal PLL requiring a lower-frequency crystal for 18.816-MHz input EEPROM interface for subsystem vendor ID Supports Microsoft Windows™ Unimodem V and TAPI specifications Supp...

Applications: Junction Temperature Calculation: TJ = TA + (PD x JA). The JA numbers are guidelines for the thermal performance of the device/ 4 layer pc- board system. All of the above assume no ambient airflow. The JA numbers are to MIL-STD-883D Method 1012.1

Features: The core functionality of the 006-1086007 is its direct-to-digital temperature sensor. The resolution of the temperature sensor is user-configurable to 9, 10, 11, or 12 bits, which corresponds to increments of 0.5C, 0.25C, 0.125C, and 0.0625C, respectively. The default resolution at power-up ...

· 00677DT

Vendor:SIPEX   Package Cooled:N/A   D/C:09+   

Description: A buffered output-enable (OE) input can be used to place the eight outputs in either a normal logic state (high or low logic levels) or the high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and in...

Applications: NOTES: 1. Dimensions are in inches. Metric equivalents are given for general information only. 2. Beyond radius (r) maximum, TW shall be held for a minimum length of .011 inch (0.28 mm). 3. Dimension TL measured from maximum HD. 4. Outline in this zone is not controlled. 5. Dimension CD sha...

Features: The nominal output impedance of the 00677DT with Pin 19 grounded has been trimmed to 100 Ω, 1%. Other output im- pedances can be generated with an external resistor, REXT, be- tween Pins 19 and 20. An REXT equalling 300 Ω will yield a total output resistance of 75 Ω, while...

· 006R

Vendor:N/A   Package Cooled:0644+   D/C:MSOP8   

Description: Limits in standard typeface are for TJ = 25˚C and limits in boldface type apply over the full Operating Junction Temperature Range (−40˚C TJ +110˚C). Unless otherwise specified, CIN = 1 µF, VIN = 12.0V, VEN = 3.0V, RSET = 6.19kΩ, VIOUT = 10.8V.

Applications: † Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating conditions is not implied. E...

Features: Typical values contained in this datasheet are based on simulations and characterization of other AVR microcontrollers manufactured on the same process technology. Min and Max values will be available after the device is characterized.

· 007-0265

Description: State of the art Hyperfast recovery rectifiers designed with optimized performance of forward voltage drop, Hyperfast recover time, and soft recovery. The planar structure and the platinum doped life time control guarantee the best overall performance, ruggedness and reliability characteristi...

Applications: NOTES: 1. A14X is a NC for IDT70V9269. 2. All VDD pins must be connected to power supply. 3. All VSS pins must be connected to ground. 4. Package body is approximately 14mm x 20mm x 1.4mm. 5. This package code is used to reference the package diagram. 6. This text does not indicate orie...

Features: The FPM includes an 8b/10b encoder and decoder, an elasticity buffer for clock skew management, and an FC-AL state machine. The FPM transmits and receives at the full Fibre Channel rate of 106.25 Mbytes/sec. The on-chip frame buffer includes separate areas for received data and transmit...

· 00713FE

Vendor:SIPEX   Package Cooled:N/A   D/C:09+   

Description: CAUTION ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on the human body and test equipment and can discharge without detection. Although the AD9748 features proprietary ESD protection circuitry, permanent damage may occur on devic...

Applications: The current drive capability of the buffered Tx and Ty outputs exceeds 100 mA. If a wiring fault causes a short from these pins to VCC (or to a buffered bus supply when using different supplies) then high dissipations result when Sx or Sy are driven low. The rated 300 mW dissipation can b...

Features: The 00713FE is particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers. The device can be used as two 8-bit flip-flops or one 16-bit flip-flop. On the positive transition of the clock (CLK) input, the Q outputs of the flip-flo...

· 00743849A

Description: Cycle time=1µs,100% duty IOUT=0mA,CE0.2V,ZZ=VIH, VIN0.2V or VINVcc-0.2V Cycle time=tRCmin,100% duty IOUT=0mA,CE=VIL,ZZ=VIH, VIN=VIL or VIH CE=VIH,ZZ=VIH, Other inputs=VIL or VIH CEVcc-0.2V,ZZVcc-0.2V, VIN0.2V or VINVcc-0.2V ZZ0.2V, VIN0.2V or VINVcc-0.2V

Applications: Notes: 1. The anode side of the device is denoted by a hole in the lead frame. Electrical insulation between the case and the board is requiredslug of device is not electrically neutral. Do not electrically connect either the anode or cathode to the slug. 2. All dimensions are in millimete...

Features: Output Threshold Adjust The state of the OUT pin is driven by a voltage comparator whose output state depends on the level of the input voltage on the sample capacitor and the level of an adjustable 8-bit threshold voltage. The threshold is adjusted by shifting data bits into the D/A Regis...

· 0075604A

Vendor:N/A   Package Cooled:SMD16   D/C:07+   

Description: 2. The maximum rated output power for this series is 20W. An increase in the output voltage may therefore require a corresponding reduction in the maximum output current (see Table 1). The revised maximum output current must be determined as follows:-

Applications:

Features: The output is capable of supplying 200 mA to the load while configured as a similar (Figure 7), lower (Figure 9), or higher (Figure 8) voltage as the reference lead. The Adj lead acts as the inverting terminal of the op amp and the VREF lead as the non−inverting. The device can al...

· 009-0016907A

Vendor:NCR   Package Cooled:QFP144   D/C:07+   

Description: Leads are Readily Solderable Lead and Mounting Surface Temperature for Soldering Purposes: 220C Max. for 10 Seconds, 1/16 from case Shipped in plastic bags, 500 per bag Available Tape and Reeled, 1500 per reel, by adding a RL suffix to the part number Polarity: Cathode indicated by Pola...

Applications: • A-Port outputs have equivalent 22-Ω series resistors, so no external resistors are required • Support mixed-mode signal operation (5V input and output voltages with 3.3V VCC) • Support unregulated battery operation down to 2.7V • Typical VOLP (output ground b...

Features: Figure 2 shows a typical application circuit for the 009-0016907A MMIC. The device is internally matched to 50 Ω, and therefore does not need any external matching. The value of the input and output DC blocking capacitors C2 and C3 should not be more than 100 pF for applications a...

· 009-0016908A

Vendor:NCR   Package Cooled:QFP128   D/C:07+   

Description: • High-speed switching (tstg: storage time/tf: fall time is short) • Low collector to emitter saturation voltage VCE(sat) • Superior forward current transfer ratio hFE linearity • Allowing automatic insertion with radial taping

Applications: The 009-0016908A/009-0016908A are fully integrated analog interfaces for digitizing high-resolution RGB graphics signals from PCs and workstations. With a sampling rate capability of up to 110/140 MHz, it can accurately support display resolutions up to 1280x1024 (SXGA) at 60/75Hz. The clamp...

Features: Applying a LOW to the INIT input causes an immediate load of the programmed initialize word into the master and slave flip-flops of the register, independent of all other inputs, including the clock (CP). The initialize data will appear at the device outputs after the outputs are enabled by br...

· 00A3R

Vendor:MARVELL   Package Cooled:QFP   D/C:04   

Description: The DS3150 performs all the functions necessary for interfacing at the physical layer to DS3, E3, and STS-1 lines. The device has independent receive and transmit paths and a built-in jitter attenuator (Figure 1-1). The receiver performs clock and data recovery from a B3ZS- or HDB3-coded alte...

Applications: PIN and NIN should be differentially driven, ac-coupled for optimum sensitivity. PWD measurement made on quantizer outputs in bypass mode. 3Jitter tolerance measurements are equipment limited. 4TDINP/N are CML inputs. If the drivers to the TDINP/N inputs are anything other than CML, they ...

Features: Figure 7. Stacked LFBGA66-12x8mm, 8x8 ball array, 0.8mm pitch, Bottom View Package Outline15 Table 7. Stacked LFBGA66 - 12x8mm, 8x8 ball array, 0.8 mm pitch, Package Mechanical Data . 15 Figure 8. Stacked LFBGA66 Daisy Chain - Package Connections (Top view through package) . . 16 Figure 9. ...

· 00T10

Description: Voltage Control Oscillator (bit LCD= 0). This pin is used to control the internal oscillator frequency by DC voltage input from external low pass filter. Pixel Clock Input (bit LCD= 1). This is a clock input pin. MTV038 can be driven by an external pixel clock source for all the logics insi...

Applications: When S/S and PWMIN pins are not used, set the input to the L level voltage. For HP output, pulsed output of Hall input IN1 (1-Hall output), 1/2 division output of 1 Hall, or synthetic output of three phases of Hall input (three-Hall synthetic output) may be selected.

Features: The 00T10 and 00T10 are single and triple high bandwidth amplifiers with a fixed gain of 2. They are primarily targeted for applications such as driving twisted- pair lines in component video applications. The inputs signal can be in either single-ended or differential form but the outputs ar...

· 010000B

Description: Typicals and limits appearing in plain type apply for TA = TJ = +25˚C. Limits appearing in boldface type apply over full Operating Junction Temperature Range (−40˚C to +125˚C). Datasheet min/max specification limits are guaranteed by design, test, or statistical analysi...

Applications: This product has been designed to meet the extreme test conditions and environment demanded by the automotive industry. For a copy of the requirements, see AEC Q101 at: http://www.aecouncil.com/ Reliability data can be found at: http://www.mtp.fairchild.com/automotive.html. All Fairchild s...

Features: BCD or seven segment outputs are available. Digit strobes are decoded internally by a divide by six Johnson counter. This counter scans from MSD to LSD. By bringing the SET input low, this counter will be forced to the MSD decade count. During this time the segment outputs are blanked to ...

· 010150TCMH-M-C1R-K

Description: Note 4: The Temperature Coefficient of the adjusted input offset voltage changes only a small amount (0.5µV/˚C typically) for each mV of adjustment from its original unadjusted value. Common-mode rejection and open loop voltage gain are also unaffected by offset adjustment.

Applications: Specified by design. Not production tested. Sample tested during the initial release and after any redesign or process changes that may affect this parameter. OUTPUT of pin VOUT changes to new level immediately (within settling time) after DAC register is loaded.

Features: The 010150TCMH-M-C1R-KB contains a programmable design security feature that controls the access to the data programmed into the device. If this programmable feature is used, a proprietary design implemented in the device cannot be copied or retrieved. This enables a high level of design contr...

· 01070V120

Description: Agilent Technologies HLMP subminiature LED lamps [3]. For example, the pulsed emerald green LED will have a light output approximately 30% brighter then the equivalent DC drive circuit at a peak pulsed current of 30 mA. Note that the pulsed circuit does not always produce a brighter LED. ...

Applications: Input power supply pin. Requires 4.7µF bypass capacitor to ground. Flying capacitor C1 positive terminal. Connect a 1.0µF capacitor between C1+ and C1-. Flying capacitor C1 negative terminal. Ground connection. Current sink input #1. Current sink input #2. AS2Cwire serial inter...

Features: FCircuit operation The 01070V120F / S high-definition sound processor sys- tem IC treats the amplifier and speakers as a total audio system, and performs signal processing at the amplifier input stage to accurately reproduce the rise sections of audio signals that determine the character...

· 0108-52

Description: Notes: 1. For conditions shown as Max or Min, use appropriate value specified under Electrical Characteristics for applicable device type. 2. Guaranteed by design. 3. ∆RON = ∆RON max – RON min. 4. Flatness is defined as the difference between the maximum and minimum value of...

Applications: The 0108-52 firmware implements a cooperative, multitasking host adapter that provides the host system with complete SCSI command and data transport capabilities, thus freeing the host system from the demands of the SCSI bus protocol. The 0108-52 firmware provides two interf...

Features: To provide the most up-to-date information, the revision of our documents on the World Wide Web will be the most current. Your printed copy may be an earlier revision. To verify you have the latest information available, refer to: http://freescale.com/

· 010B712

Vendor:MITSUDISHI   Package Cooled:TSOP-3.9-20P   D/C:01+   

Description: mode with little power consumption. It can also operate with high speed system clock rate of 3.58MHz in normal mode for high performance operation. To ensure smooth dialer function and to avoid MCU shut-down in extreme low voltage situation, the dialer I/O circuit is built-in to generate hard...

Applications: The on-chip auto exposure allows for a wide range of lighting conditions, eliminating the need for external mechanical shut- ter components. This, along with its single supply, low power consumption makes the 010B712 an incredibly versatile and cost-effective video camera perfect for the follo...

Features: The 010B712 can operate autonomously or be controlled by an I2C serial interface. Up to 16 010B712s may coexist on the same data bus, allowing up to 64 powered Ethernet ports to be controlled with only two digital lines. Fault con- ditions are optionally signaled with the INT pin to eliminate...

· 011100075K

Vendor:TDK   Package Cooled:PLCC28   D/C:07/08+   

Description: The HY51V(S)17400HG/HGL is the new generation dynamic RAM organized 4,194,304 words x 4bit. HY51V(S)17400HG/HGL has realized higher density, higher performance and various functions by utiliz- ing advanced CMOS process technology. The HY51V(S)17400HG/HGL offers Fast Page Mode as a high speed...

Applications: The MAX3873 is implemented in Maxims second-generation SiGe process and consumes only 260mW at +3.3V supply (output clock disabled, low output swing). The device is available in a 4mm x 4mm 20-pin QFN exposed-pad package and operates from -40C to +85C.

Features: Notes: 1. CX1 must be placed within 0.7 cm of 011100075K to obtain optimum noise immunity. 2. In environments with noisy power supplies, supply rejection can be enhanced by including CX2 as shown in 011100075K Functional Block Diagramon page 2.

· 01124421J211110

Description: The C6203 device program memory consists of two blocks, with a 256K-byte block configured as memory-mapped program space, and the other 128K-byte block user-configurable as cache or memory-mapped program space. Data memory for the C6203 consists of two 256K-byte blocks of RAM.

Applications: In addition, the oscillator and flip-flop sections have been enhanced to provide additional performance. The R T/CT pin now doubles as a synchronization input that can be easily driven from open collector/open drain logic outputs. This sync input is a high impedance input and can easily b...

Features: The 01124421J211110F and 01124421J211110FS are 24V motor drivers for 2-phase, half-wave fan motors. The ICs have lock detection and automatic restart functions. In compact SOP8 (01124421J211110F) and SSOP-A16 (01124421J211110FS) packages, the ICs reduce the number of external components req...

· 0113MGE

Vendor:N/A   Package Cooled:N/A   D/C:103   

Description: Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating conditions is not implied. Exposur...

Applications: The DAC5662 has been specifically designed for a differential transformer coupled output with a 50-Ω doubly terminated load. For a 20-mA full-scale output current a 4:1 impedance ratio (resulting in an output power of 4 dBm) and 1:1 impedance ratio transformer (-2 dBm output power) ar...

Features: (The figure is shown as Regulator with Reverse Diode Protection in advanced applications) In general operation, 0113MGE series dont need any protection diodes. From the cross-section structure of 0113MGE sries, the output pin is connected to P+ substrate, and the input pin is connected to N-...

· 01173V201

Description: Diagonal 3mm (Type 1/6) 752 (H) 582 (V) approx. 440K pixels 795 (H) 596 (V) approx. 470K pixels 3.30mm (H) 2.95mm (V) 3.275µm (H) 3.150µm (V) Horizontal (H) direction: Front 3 pixels, rear 40 pixels Vertical (V) direction:Front 12 pixels, rear 2 pixels Horizontal ...

Applications: Hynix HYMD232646B(L)8J-J series is designed for high speed of up to 166MHz and offers fully synchronous opera- tions referenced to both rising and falling edges of differential clock inputs. While all addresses and control inputs are latched on the rising edges of the clock, Data, Data strobes...

Features: When executing the Write Scratchpad command the CRC generator inside the 01173V201 iButton (see Figure ??) calculates a CRC over the entire data stream, starting at the command code and ending at the last data byte sent by the 1-Wire master. This CRC is generated using the CRC16 polynomial b...

· 011AL

Vendor:10000   Package Cooled:ICS   D/C:06+   

Description: "Absolute Maximum Ratings" are those values beyond which the safety of the device cannot be guaranteed. Except for "Operating Temperature Range" they are not meant to imply that the device should be operated at these limits. The table of "Electrical Characteristics&q...

Applications: Function Clock source selection 0: clocks pass PLL, use XIN (pin 12) 1: bypass PLL, use CLKIN (pin 11) External clock source; bypass PLL Crystal oscillator in, or external clock in; if external clocks used, leave Xout (pin 13) unconnected Crystal oscillator out Pixel clock output ...

Features: An additional feature of the ispLSI 3160 is the Boundary Scan capability, which is composed of cells connected between the on-chip system logic and the device's input and output pins. All I/O pins have associated boundary scan registers, with 3-state I/O using three boundary scan registe...

· 011AN

Vendor:2000   Package Cooled:ICS   D/C:06+   

Description: The CM3513 also prevents backdrive current flowing into the host from the connected peripheral. This can occur when VCC is removed as the host powers down, and the peripheral still has normal power applied. The 5V from the peripheral can therefore be linked to the hosts VBUS, potentially cau...

Applications: RS is the parasitic series resistance of the diode, the sum of the bondwire and leadframe resistance, the resistance of the bulk layer of silicon, etc. RF energy coupled into RS is lost as heat it does not contribute to the rectified output of the diode. CJ is parasitic junction capacit...

Features: The AT011AN is a five-volt-only in-system Flash programmable and erasable read only memory (PEROM). Its 256K of memory is organized as 32,768 words by 8 bits. Manufactured with Atmels advanced nonvolatile CMOS technology, the device offers access times to 70 ns with power dissipation of jus...

· 01220088.Z

Vendor:323   Package Cooled:LITTELFUSE   D/C:01+   

Description: Output Capacitor (C2 and C8). Capacitors with low impedance for high-frequency ripple current must be used. Especially when the C2 impedance is high, the switching waveform may not be normal at low temperatures. Film or tantalum capacitors for C2 may cause abnormal oscilla- tions.

Applications: The 01220088.Z can deliver Line Reversal, which is required in operation such as ANI, by simply setting LR (pin 7) to +5V. The device transmission parameters will cease during the reversal. The LR (pin 7) should be set to 0V for all normal loop operations.

Features: The 01220088.Z is a 64-position, One-Time-Programmable (OTP) digital potentiometer4 that employs fuse link technology to achieve the permanent program setting. This device performs the same electronic adjustment function as most mechanical trimmers and variable resistors. It allows unlimite...

· 01261-0

Vendor:3950   Package Cooled:CIDCO   D/C:09+   

Description: SDRAM Controller 64-bit data bus. Up to 90MHz SDRAM clock speed. Integrated system memory, graphic frame memory and video frame memory. Supports 8MB up to 128 MB system memory. Supports 16-Mbit, 64-Mbit and 128-Mbit SDRAMs. Supports 8, 16, 32, 64, and 128 MB DIMMs. Supports buffered...

Applications: Built-in flexibility allows the ISL3871 to be configured through a general purpose control bus, for a range of applications. The ISL3871 is housed in either a thin plastic BGA package or a TQFP flat pack suitable for PCMCIA board applications.

Features: TJ = TA + (PD • 230C/W). Note 4: Dynamic supply current is higher due to the gate charge being delivered at the switching frequency. Note 5: The 01261-0 is tested in a feedback loop that servos VFB to the output of the error amplifier while maintaing ITH/RUN at the midpoint of the cu...

· 012-90026

Description: Drain-to-Source Breakdown Voltage Gate Threshold Voltage Gate-to-Source Leakage Forward Gate-to-Source Leakage Reverse Zero Gate Voltage Drain Current Static Drain-to-Source à On-State Resistance (TO-3) Static Drain-to-Source à On-State Resistance (SMD-2) Diode Forward Vo...

Applications: The API8208A eliminates the need of complicated circuitry in voice playback but still achieves high voice quality. Sounds such as human speech, animal sounds, musical sounds and even special sound effects can be synthesized. Versatile combinations in sections achieve longer playback dura...

Features: 1. Use this component within operating temperature range. It might not be satisfied with electrical specification without operating temperature range. When it is used less than -20ºC or more than +70ºC, it might be a cause of degradation or destruction of the component. Even if ...

· 012B

Vendor:SMD(2)   Package Cooled:PHILIPS   D/C:N/A   

Description: Typical system performance parameters for the receiver are 93 dB gain, 7.5 dB noise figure, input-referred third-order intercept point (IIP3) of +1 dBm, AGC settling time of 8 µs, and Tx-to-Rx switching time of 3 µs. The transmitter typical system performance parameters are an...

Applications: Figure 3 shows the load transient response. With two 47uF ceramic output capacitors, the maximum output voltage deviation can meet 5% for 50% step load change (3A). In addition, the transient response finishes within 10us. Table 1 lists the bill of materials.

Features: To provide optimal flexibility, the memory array of the 012B is divided into three levels of granularity comprising of sectors, blocks, and pages. The Memory Architecture Diagram illustrates the breakdown of each level and details the number of pages per sector and block. All program operat...

· 012G

Vendor:3950   Package Cooled:PHI   D/C:09+   

Description: Both pre- and post-radiation performance are tested and specified using the same drive circuitry and test conditions in order to provide a direct comparison. It should be noted that at a radiation level of 1 x 105 Rads (Si), no change in limits are specified in DC parameters. At a radia...

Applications: Information in this document is provided solely to enable system and software implementers to use Freescale Semiconductor products. There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits or integrated circuits based on the informat...

Features: Abstract A two-stage 1.9GHz monolithic low-noise amplifier (LNA) with a measured noise figure of 2.3dB and an associated gain of 15dB was fabricated in a standard silicon bipolar transistor array. It dissipates 5.2mW from a 3V supply including the bias circuitry. Input return loss and isola...

· 013-007/5

Description: The RESET output is guaranteed to be in the correct state with V CC down to 1V. The MAX709 provides excellent circuit reliability and low cost by eliminating external components and adjustments when used with +5V, +3.3V, or +3V powered systems. The MAX709 is available 8-pin DIP, µMAX, ...

Applications: This Hall effect sensor is a monolithic integrated circuit with 2 Hall plates 2.25 mm apart that switches in re- sponse to differential magnetic fields. If magnetic fields with flux lines at right angles to the sensitive areas are applied to the sensor, the biased Hall plates force Hall ...

Features: The 013-007/5AFP is a new generation microcomputer with a 32-bit CPU and built-in high capacity DRAM. Using this device it is possible to implement the complex applications of the multimedia age with high performance and low power consumption. The 013-007/5AFP contains 2M bytes of DRAM an...

· 01335ADAA

Description: SNR 102dB (A weighted @ 48kHz) THD -90dB (at C1dB) Sampling Frequency: 8 C 192kHz Master or Slave Clocking Mode System Clock (MCLK): 128fs, 192fs, 256fs, 384fs, 512fs, 768fs Audio Data Interface Modes - 16-24 bit I2S, 16-24 bit Left, 16-24 bit Right Justified Supply Voltages - Analogue 2...

Applications: The software Block Erase mode is initiated by issuing the specific six-word loading sequence, as in the Software Data Protect operation. After the loading cycle, the device enters into an internally timed Erase cycle. (See Table 3 for specific codes, Figure 5-2 for the timing waveform, and Fig...

Features: The Hynix 01335ADAA Series are Dual In-line Memory Modules suitable for easy interchange and addition of 256Mbytes memory. The Hynix 01335ADAA Series are fully synchronous operation referenced to the positive edge of the clock . All inputs and outputs are synchronized with the rising edge of ...

· 013-550077

Vendor:AMI   Package Cooled:QFP   D/C:00+   

Description: A powerful program sequencer controls the flow of instruction execution, including instruction alignment and decoding. The sequencer supports conditional jumps and subroutine calls, as well as zero-overhead looping. A loop buffer stores instructions locally, eliminating instruction memory ...

Applications: These circuits perform a single function: they assert a reset signal whenever the VCC supply voltage declines below a preset threshold, with hysteresis keeping it asserted for time delay determined by externally pro- gramable time delay generator. after VCC has risen above the reset threshol...

Features: In the Write mode (See fig6A, p.9), the clock gen. acknowledges Address Byte, D2, then receives two additional bytes: 1) Command Code byte, and 2) Byte Count byte. Must be programmed to FF for correct operation. Although the data (bits) in these two bytes are considered dont care; they mus...

· 013B

Vendor:SOP   Package Cooled:PHI   D/C:N/A   

Description: Te xas Instrume nts and its subsidiarie s (TI) re se rve the right to make change s to the ir products or to discontinue any product or se rvice without notice , and advise custome rs to obtain the late st ve rsion of re le vant information to ve rify, be fore placing orde rs, that informat...

Applications: • 013BT is pin compatible with bipolar FAST™ Series at a higher speed and lower power consumption • TTL input and output levels • Extremely low static power • Hysteresis on all inputs • Industrial operating temperature range: C40C to +85C • Packag...

Features: An internal high "Q" SAW delay line provides low jitter signal performance and establishes the output frequency of the VCSO (Voltage Controlled SAW Oscillator). In a given 013B/21 device, the VCSO center frequency is fixed. A common center frequency is 622.08MHz, for SONET for...

· 0140-002

Vendor:NS   Package Cooled:SMD   D/C:08+   

Description: The Power Saving (PS) module implements the Idle Mode (ARM7TDMI core clock stopped until the next interrupt) and enables the user to adapt the power consumption of the microcontroller to application requirements (independent peripheral clock control).

Applications: The Hitachi HN58C1001 is a electrically erasable and programmable ROM organized as 131072-word 8- bit. It has realized high speed, low power consumption and high reliability by employing advanced MNOS memory technology and CMOS process and circuitry technology. It also has a 128-byte page p...

Features: Description The 0140-002AKE is an interline CCD solid-state image sensor suitable for NTSC small color cameras. High resolution is achieved through the use of Ye, Cy, Mg, and G complementary color mosaic filters. This chip features a field period readout system and an electronic shu...

· 014-0217-00

Vendor:Infineon   Package Cooled:PLCC44   D/C:07+   

Description: The AT40KAL is designed to quickly implement high-performance, large gate count designs through the use of synthesis and schematic-based tools used on a PC or Sun platform. Atmels design tools provide seamless integration with industry standard tools such as Synplicity, ModelSim, Exemplar a...

Applications: Once the limiting parameters in these two relationships have been determined, the design can be modified to ensure that the device remains within specified operating conditions. If overload conditions are not considered, it is possible for

Features: The Hynix 014-0217-00 Series are 16Mx64bits Synchronous DRAM Modules. The modules are composed of eight 8Mx16bits CMOS Synchronous DRAMs in 400mil 54pin TSOP-II package, one 2Kbit EEPROM in 8pin TSSOP package on a 168pin glass-epoxy printed circuit board. Two 0.33uF and one 0.1uF decoupling ca...

· 0140MKH

Description:

Applications: VFB (Pin 7): Error Amplifier Inverting Input. The noninvert- ing input of the error amplifier is connected to an internal 1.231V reference. The VFB pin is connected to a resistor divider from the converter output. Values for the resistor connected from VOUT to VFB (RFB1) and the resistor con- ...

Features: The 0140MKH contains six 256-position nonvolatile (NV) potentiometers, 64 bytes of NV user EEPROM memory, and four programmable NV I/O pins. The six poten- tiometers all share a common low side. The potentiome- ters are separated into two groups of three 50kΩ potentiometers in parallel....

· 01410120A

Vendor:AMS   Package Cooled:PLCC68   D/C:04+   

Description: Features Include: Ideal for 1U High / Low Profile Applications Active Power Factor Correction for EN61000-3-2 Compliance Greater than 80% Efficiencies World-Wide Safety Approvals Class B Emissions Full Featured Control and Status Signals

Applications: CT: The oscillator-programming pin. Only two components are required to program the internal oscillator frequency: a resistor connected between the Vcc pin and the CT pin, and a capacitor connected from the CT pin to GND. The approximate oscillator frequency is determined by the following sim...

Features: To fully enhance the external N-channel switches, internal charge pumps are used to boost the output gate drive to approximately 2.5 times the supply voltage, or 7.25V, whichever is less. A feedback network is used to regulate the output gate drive. This keeps the supply current low in additi...

· 014-13682

Vendor:FAI   Package Cooled:04+   D/C:SOP3.9   

Description: Note 2: When the input voltage (VI) at any pin exceeds the power supplies (VI < GND or VI > +VS) the current at that pin should be limited to 5 mA. The 20 mA maximum package input current rating limits the number of pins that can safely exceedthe power supplies with an input current of ...

Applications: CAUTION ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on the human body and test equipment and can discharge without detection. Although the AD1833A features proprietary ESD protection circuitry, permanent damage may occur on devic...

Features:

· 014-16735

Vendor:NS   Package Cooled:01+   D/C:SMD-14 7.2   

Description: 5. Definition for PSRR: VREFIN tied to VREFOUT, VA+ = VD+ = 3V, AGND = DGND = 0V, VA- = -2V (using charge-pump circuit with CPD). In addition, a 106.07 mV rms (60 Hz) sinewave is imposed onto the VA+ and VD+ pins. The + and - input pins of both input channels are shorted to VA-. 2048 inst...

Applications: The CAT014-16735 is intended for use with standard micro- processors. The CAT014-16735 is organized as 16 registers by 16 bits. Seven 8-bit instructions control the devices operating modes, the RAM reading and writing, and the E2PROM storing and recalling. It is also possible to control ...

Features: The 014-16735 is a transistor of on-chip high hFE resistor incorporating dumper diode in collector to emitter and zener diode in collector to base as protect elements. This transistor is ideal for actuator drives of OA equipments and electric equipments.

· 0141A0860-04

Description: Note 5: In applications where high power dissipation and/or poor package thermal resistance is present, the maximum ambient temperature may have to be de-rated. Maximum ambient temperature (TA-MAX) is dependent on the maximum operating junction temperature (TJ-MAX-OP = 125˚C), the maxim...

Applications: The Hynix HYM71V16635HCT8P Series are 16Mx64bits Synchronous DRAM Modules. The modules are composed of eight 16Mx8bits CMOS Synchronous DRAMs in 400mil 54pin TSOP-II package, one 2Kbit EEPROM in 8pin TSSOP package on a 168pin glass-epoxy printed circuit board. One 0.22uF and one 0.0022uF decou...

Features: NOTES: A. CL includes probe and test-fixture capacitance. B. Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control. Waveform 2 is for an output with internal conditions such that the output is high except when disabled ...

· 014-597

Vendor:MOT   Package Cooled:N/A   D/C:07+   

Description: • Digital Imaging - Digital Still Cameras - Photo-Imaging Printers • Data Communication - Notebook Computers - Desktop PCs - Win CE Handheld Products - Personal Digital Assistants (PDAs) - Printers - Fax Machines, Photocopiers - Screen Projectors - Auto PCs - Don...

Applications: CAUTION ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on the human body and test equipment and can discharge without detection. Although the 014-597/014-597/014-597/014-597 features proprietary ESD protection circuitry, per- manen...

Features: The 014-597 is a multi band RF mixer oscillator with image reject and on-board frequency synthesizer. It is intended primarily for application in all band terrestrial tuners and requires a minimum external component count. It contains all elements required for RF downconversion to a standard I...

· 0146MTG

Description: An analog input connected to the RING (more negative) side of the subscriber loop through a 150Ω feed resistor and a ring relay contact. Functions with the Tip terminal to receive voice signals from the telephone and for loop monitoring purposes.

Applications: The HCMOS MC68SEC000s static architecture is a direct replacement for the MC68EC000, which offers the lowest cost entry point to 32-bit processing. The internal 32-bit architecture provides fast and efficient processing that satisfies the requirements of sophisticated applications based on ...

Features: The 0146MTG supports a host software interface similar to the QLogic parallel SCSI and single channel Fibre Channel processor families. Existing ISP2300 software drivers for all major operating systems are easily modified to support the 0146MTG. The 0146MTG also supports FCP-SCSI, IP, ...

· 014B

Vendor:SOP   Package Cooled:PHI   D/C:N/A   

Description: The ADSP-21991 is a mixed signal DSP controller based on the ADSP-219x DSP Core, suitable for a variety of high performance industrial motor control and signal processing applications that require the combination of a high performance DSP and the mixed signal integration of embedded contr...

Applications: The fixed 2.5-V output controller uses an internal temperature-compensated bandgap reference centered at 1.2 V. Its tolerance is designed to be <2% over the specified temperature range, which, when coupled with the low offset of the driver circuit, allows the 2.5-V output to have a toler...

Features: Note 1: Absolute Maximum Ratings are those values beyond which the life of a device may be impaired. Note 2: Current flows out of CHP, voltage at CHP = 0V. Note 3: The 014BE is guaranteed to meet performance specifications from 0C to 70C. Specifications over the C40C to 85C operating tempe...

· 015-0001-060

Vendor:820   Package Cooled:深圳凯利泰   D/C:N/A   

Description: The following describes a procedure for evaluating the RMBA19500, a monolithic high efficiency power amplifier, in a surface mount package, designed for use as a driver stage for PCS Base station or as the final output stage for Micro- and Pico-Cell base stations. Figure 1 shows the package...

Applications: Combining Fairchilds advanced 2.5V specified PowerTrench process with state of the art BGA packaging, the 015-0001-060 minimizes both PCB space and RDS(ON).This BGA MOSFET embodies a breakthrough in packaging technology which enables the device to combine excellent thermal transfer cha...

Features: For each of the four inputs, the 015-0001-060 provides a dual-switched integrator front-end. This allows for continuous current integration: while one integrator is being digitized by the onboard A/D converter, the other is integrating the input current. Adjustable full-scale ranges from...

· 015-00248-0000

Vendor:CMD   Package Cooled:SOP-16   D/C:06+   

Description: Please note : The devices listed in this document are designed for general applications only in electronic equipment . No devices shall be deployed which require higher level of reliability such as medical and other life support equipments; space application ; telecommunication equipment (tr...

Applications: The TLV349x family of push-pull output comparators fea- tures a fast 6µs response time and < 1.2µA (max) nanopower capability, allowing operation from 1.8V C 5.5V. Input com- mon-mode range beyond supply rails make the TLV349x an ideal choice for low-voltage applications.

Features: To increase the dynamic range even further, the 015-00248-0000AQ/AQF adopts the same three-field readout system used in the ICX432DQ/DQF. This allows the area occupied by the photodiode in the unit pixel to be increased over that of conven- tional Sony products, and achieves a satu- ...

Pages: 7000/12185  At 10 6991 6992 6993 6994 6995 6996 6997 6998 6999 7000 Under 10

Quick Search Part No.

Home About Us Map Online Inquiry
© 2009-2011 ExchangeIC.com Corp.All Rights Reserved